SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This allows to remove two needless tests from uwire_txrx() and uwire_setup_transfer(). Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> --- drivers/spi/spi-omap-uwire.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 55576db31549..ce8dbdbce312 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -205,7 +205,7 @@ static void uwire_chipselect(struct spi_device *spi, int value) static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) { unsigned len = t->len; - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned bytes; u16 val, w; int status = 0; @@ -344,9 +344,10 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) /* assume it's already enabled */ rate = clk_get_rate(uwire->ck); - hz = spi->max_speed_hz; - if (t != NULL && t->speed_hz) + if (t != NULL) hz = t->speed_hz; + else + hz = spi->max_speed_hz; if (!hz) { pr_debug("%s: zero speed?\n", dev_name(&spi->dev)); -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html