[PATCH 3/4 RESEND] spi: s3c64xx: simplify suspend / resume handlers

[Heiner Kallweit <hkallweit1@xxxxxxxxx>]

The runtime PM suspend / resume handlers take care of the enabling/
disabling the clocks already. Therefore replace the duplicated
clock handling with pm_runtime_force_suspend/resume.

Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
Changed:
- Replaced pm_runtime_suspend/resume calls with their
  .._force_.. equivalents.

 drivers/spi/spi-s3c64xx.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index edeac06..735b7f5 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1246,10 +1246,9 @@ static int s3c64xx_spi_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
-	if (!pm_runtime_suspended(dev)) {
-		clk_disable_unprepare(sdd->clk);
-		clk_disable_unprepare(sdd->src_clk);
-	}
+	ret = pm_runtime_force_suspend(dev);
+	if (ret < 0)
+		return ret;
 
 	sdd->cur_speed = 0; /* Output Clock is stopped */
 
@@ -1261,14 +1260,14 @@ static int s3c64xx_spi_resume(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 	struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
+	int ret;
 
 	if (sci->cfg_gpio)
 		sci->cfg_gpio();
 
-	if (!pm_runtime_suspended(dev)) {
-		clk_prepare_enable(sdd->src_clk);
-		clk_prepare_enable(sdd->clk);
-	}
+	ret = pm_runtime_force_resume(dev);
+	if (ret < 0)
+		return ret;
 
 	s3c64xx_spi_hwinit(sdd, sdd->port_id);
 
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html