Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi and upps,


2015-08-21 14:09 GMT+02:00 Christian Hartmann <cornogle@xxxxxxxxxxxxxx>:
> Hi
>
> 2015-08-21 9:43 GMT+02:00 Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>:
>> So please drop the code in 1) to be able to request the GPIO in the
>> driver.
>
> [    6.129664] spi spi-WM510205:00: 8333333 Hz actual, PIO
> [    6.129675] spi spi-WM510205:00: setup mode 0, 8 bits/w, 8000000 Hz max --> 0
> [    6.129759] spi spi-WM510205:00: checking WM510205 with bmp180
> [    6.129765] spi spi-WM510205:00: checking WM510205 with bmp181
> [    6.129797] spi spi-WM510205:00: modalias WM510205 in id_table not
> found, returns NULL
> [    6.129825] arizona spi-WM510205:00: arizona_acpi_get_type(), than
> via spi_get_device_id().
> [    6.129831] arizona spi-WM510205:00: arizona_acpi_get_type matched
> [    6.129836] arizona spi-WM510205:00: using 1 as type for arizona audio codec
> [    6.129840] arizona spi-WM510205:00: regmap set to wm5102_spi
> [    6.130630] arizona spi-WM510205:00: spi_irq = -1
> [    6.130638] arizona spi-WM510205:00: acpi_dev_add_driver_gpios
> arizona_acpi_gpios added done, 0
> [    6.130642] arizona spi-WM510205:00: arizona_spi_probe done,
> calling arizona_dev_init
> [    6.130647] arizona spi-WM510205:00: dev_set_drvdata done for 1
> [    6.130653] acpi WM510205:00: GPIO: looking up 0 in _CRS
> [    6.130703] arizona spi-WM510205:00: arizona_of_get_core_pdata
> (ACPI) using irq_gpio GPIO = 146
> [    6.130708] arizona spi-WM510205:00: arizona_of_get_core_pdata for 1
> [    6.130713] arizona spi-WM510205:00: regcache_cache_only for 1 set
> [    6.130717] arizona spi-WM510205:00: added wm5102_core_supplies for 1
> [    6.131255] arizona spi-WM510205:00: mfd_add_devices done for 1
> [    6.131267] spi-WM510205:00 supply AVDD not found, using dummy regulator
> [    6.131301] spi-WM510205:00 supply DBVDD1 not found, using dummy regulator
> [    6.131332] arizona spi-WM510205:00: devm_regulator_bulk_get done for 1
> [    6.131338] LDO1: supplied by regulator-dummy
> [    6.131389] arizona spi-WM510205:00: regulator_get done for 1
> [    6.131397] arizona spi-WM510205:00: GPIO lookup for consumer reset
> [    6.131401] arizona spi-WM510205:00: using ACPI for GPIO lookup
> [    6.131407] acpi WM510205:00: GPIO: looking up reset-gpios
> [    6.131414] acpi WM510205:00: GPIO: _DSD returned WM510205:00 3 1 0 0
> [    6.131498] acpi WM510205:00: GPIO: looking up 0 in _CRS
> [    6.131543] no flags found for reset
> [    6.131549] arizona spi-WM510205:00: devm_gpiod_get done to request
> /RESET: -1
> [    6.131556] arizona spi-WM510205:00: regulator_bulk_enable done,
> enable core supplies: 0
> [    6.131561] arizona spi-WM510205:00: regulator_enable done, enable DCVDD: 0
> [    6.141803] arizona spi-WM510205:00: arizona_disabe_reset
> [    6.141813] arizona spi-WM510205:00: regcache_cache_only
> [    6.144796] arizona spi-WM510205:00: regmap_read : read ID
> register, return value: 0
> [    6.144806] arizona spi-WM510205:00: found device ID: ffff
> [    6.175352] arizona spi-WM510205:00: Unknown device ID ffff
> [    6.175584] pxa2xx-spi 80860F0E:00: registered child spi-WM510205:00
> [    6.177870] sst-acpi 80860F28:00: No matching ASoC machine driver found
>
> as you said, I removed the code in 1) so the EBUSY error is gone.
>
> What is with the spi_irq = -1 ?? is this a problem here?
>
> the message "no flags found for reset" seems also ok, but it does not
> read the device id yet,
>  what else can be wrong here?
>
> In previous mails I added the _CRS for this device WM510202, is the
> gpio-mapping, with its indexes ok so far??
>
> The last two messages are clear to me.
> I will add the machine driver if the device id was read correctly etc.
>
> cheers
> chris

I have overseen the code, where the function
arizona_ldo1_of_get_pdata() is called only if  CONFIG_OF is
enabled....
will fix this first...

sorry for the extra noise


cheers
chris
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux