Linux SPI

• Thread Index

• [PATCH 1/7] spi: pxa2xx: move debug messages to pump_transfer()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Applied "spi: core: use gpio_is_valid() helper" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835aux: change initialization order and switch to platform_get_irq
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• Re: [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• Re: [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
• Applied "spi: dw: remove a NULL check when call ->remove()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: explicitly free IRQ handler in dw_spi_remove_host()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word.
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [RESEND PATCH] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word.
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word.
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH v1 1/1] spi: core: use gpio_is_valid() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] spi: dw: explicitly free IRQ handler in dw_spi_remove_host()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 0/2] spi: dw: bug fix and clean up series
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] spi: dw: remove a NULL check when call ->remove()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] spi: dw: remove a NULL check when call ->remove()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] spi: dw: explicitly free IRQ handler in dw_spi_remove_host()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word.
  • From: David Mosberger-Tang <davidm@xxxxxxxxxx>
• Re: [PATCH] spi-atmel.c: fix DMA for bits_per_word > 8
  • From: David Mosberger <davidm@xxxxxxxxxx>
• Applied "spi: dw: use plain struct device * at earlier ->probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: remove unneeded cr0 member of struct chip_data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: remove bits_per_word member of struct chip_data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: eliminate speed variable in ->transfer_one()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: eliminate unused threshold variables" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: introduce spi_shutdown_chip()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-pci: remove unused pdev member from struct dw_spi_pci" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-mmio: convert to unified device property API" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 04/10] spi: dw: remove a NULL check when call ->remove()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 01/10] spi: dw: explicitly free IRQ handler in dw_spi_remove_host()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/5] mt8173 spi multiple devices support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi-atmel.c: fix DMA for bits_per_word > 8
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi-atmel.c: fix DMA for bits_per_word > 8
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Applied "spi: davinci: use spi->cs_gpio directly" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-ti-qspi: switch to polling mode for better r/w performance" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: choose closest lower speed" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: fixed bad data on longer transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: change initialization order and switch to platform_get_irq" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: change initialization order and switch to platform_get_irq" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core: propagate return code of __spi_validate_bits_per_word()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: Setup the master controller driver before setting the chipselect
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] spi: Setup the master controller driver before setting the chipselect
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH v2] spi: Setup the master controller driver before setting the chipselect
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] spi: davinci: use spi->cs_gpio directly
  • From: Luis de Bethencourt <luisbg@xxxxxxxxxxxxxxx>
• [PATCH v2] spi: Setup the master controller driver before setting the chipselect
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: change initialization order and switch to platform_get_irq
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• [PATCH] spi: bcm2835aux: fixed bad data on longer transfers
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: kconfig: When possible, compile drivers with COMPILE_TEST
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: kconfig: When possible, compile drivers with COMPILE_TEST
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [RFC][PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH v6 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
• [PATCH] spi: bcm2835aux: change initialization order and switch to platform_get_irq
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH] spi: bcm2835: change initialization order and switch to platform_get_irq
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v6 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 01/10] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v6 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_caps interface
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v6 01/10] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v6 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_caps interface
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v6 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [alsa-devel] [PATCH v6 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_caps interface
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v6 08/10] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_caps interface
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 01/10] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 02/10] Documentation: arm-pl330: add description of arm,pl330-broken-no-flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 03/10] DMA: pl330: add quirk for broken no flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 04/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3288 platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 05/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3xxx platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 06/10] DMA: dmaengine: expose max burst capability to clients
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 07/10] DMA: pl330: add max burst for dmaengine
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v6 0/10] Fix broken DMAFLUSHP on Rockchips platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v1 04/10] spi: dw: remove a NULL check when call ->remove()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/10] spi: dw: introduce spi_shutdown_chip()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/10] spi: dw: remove bits_per_word member of struct chip_data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/10] spi: dw-mmio: convert to unified device property API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/10] spi: dw-pci: remove unused pdev member from struct dw_spi_pci
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/10] spi: dw: use plain struct device * at earlier ->probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/10] spi: dw: eliminate unused threshold variables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/10] spi: dw: eliminate speed variable in ->transfer_one()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/10] spi: dw: remove unneeded cr0 member of struct chip_data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/10] spi: dw: explicitly free IRQ handler in dw_spi_remove_host()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 00/10] spi: dw: bug fix and clean up series
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 1/1] spi: core: propagate return code of __spi_validate_bits_per_word()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] spi: kconfig: When possible, compile drivers with COMPILE_TEST
  • From: Luis de Bethencourt <luisbg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [RFC][PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [RFC][PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [RFC][PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: "Ivan T. Ivanov" <iivanov.xz@xxxxxxxxx>
• Re: [PATCH 5/5] arm64: dts: spi bus dts support multiple devices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] spi: mediatek: remove mtk_spi_config
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 1/5] dt-binding: spi: Mediatek: Update document devicetree bindings to support multiple devices
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 3/5] spi: mediatek: handle controller_data in mtk_spi_setup
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: spi bus dts support multiple devices
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 4/5] spi: mediatek: mt8173 spi multiple devices support
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 0/5] mt8173 spi multiple devices support
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: spi/bcm63xx: fix standard accessors and compile guard
  • From: Andreas Ziegler <andreas.ziegler@xxxxxx>
• [PATCH v2 1/1] spi-pxa2xx: choose closest lower speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC] spi: Switch call order of spi master setup and spi_set_cs
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [RFC] spi: Switch call order of spi master setup and spi_set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-ti-qspi: switch to polling mode for better r/w performance
  • From: Vignesh R <vigneshr@xxxxxx>
• [RFC][PATCH] spi: Setup the master controller driver before setting the chipselect
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [RFC] spi: Switch call order of spi master setup and spi_set_cs
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Applied "spi: spi-coldfire-qspi: enable RuntimePM before registering to the core" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Map SPI OF client IRQ at probe time" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: move message control word description to register offsets" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: fix standard accessors and compile guard" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] spi-pxa2xx: choose closest lower speed
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH V3 3/3] spi/bcm63xx: move register definitions into the driver
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V3 2/3] spi/bcm63xx: move message control word description to register offsets
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V3 1/3] spi/bcm63xx: fix standard accessors and compile guard
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V3 0/3] spi/bcm63xx: cleanup and decouple from arch code
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH] spi: ti-qspi: Fix data corruption seen on r/w stress test
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 4/4] spi: spi-coldfire-qspi: enable RuntimePM before registering to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH v2] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Michael Welling <mwelling@xxxxxxxx>
• [PATCH] spi: Map SPI OF client IRQ at probe time
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [RFC PATCH] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Michael Welling <mwelling@xxxxxxxx>
• [PATCH v2] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 4/4] spi: spi-coldfire-qspi: enable RuntimePM before registering to the core
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] spi: spi-coldfire-qspi: enable RuntimePM before registering to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 4/4] spi: spi-coldfire-qspi: enable RuntimePM before registering to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: McSPI hangs with cs_change after "Switch driver to use transfer_one" change
  • From: Michael Welling <mwelling@xxxxxxxx>
• [RFC PATCH] spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• McSPI hangs with cs_change after "Switch driver to use transfer_one" change
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/1] spi-pxa2xx: choose closest lower speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [GIT PULL] spi fixes for v4.3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: spi: add bindings for the bcm2835 auxiliary spi devices" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: add bcm2835 auxiliary spi device driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] misc: eeprom: at25: add Cypress FRAM functionality
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] misc: eeprom: at25: add Cypress FRAM functionality
  • From: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
• Re: [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Odp: Re: [PATCH v2 1/2] sc16is7xx: Prevent TX buffer overrun, prevent crash
  • From: JakubK <moorray3@xxxxx>
• Re: [PATCH v2 1/2] sc16is7xx: Prevent TX buffer overrun, prevent crash
  • From: Florian Achleitner <achleitner.florian@xxxxxxxxxxx>
• Re: [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Applied "spi: bitbang: remove unneeded check" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bitbang: switch to the generic implementation of transfer_one_message" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] sc16is7xx: Prevent TX buffer overrun, prevent crash
  • From: Florian Achleitner <achleitner.florian@xxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH] sc16is7xx: null ptr check
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] sc16is7xx: null ptr check
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: m25p80: Commit "allow arbitrary OF matching for "jedec,spi-nor"" breaks module autoloading
  • From: Mark Brown <broonie@xxxxxxxxxx>
• m25p80: Commit "allow arbitrary OF matching for "jedec,spi-nor"" breaks module autoloading
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 1/2] sc16is7xx: Prevent TX buffer overrun, prevent crash
  • From: Jakub Kiciński <moorray3@xxxxx>
• Re: [PATCH] spi: pxa2xx: Remove unused psp member variable from struct chip_data
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Applied "spi: pxa2xx: Remove unused psp member variable from struct chip_data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Remove unused psp member variable from struct chip_data
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Remove empty function pxa2xx_spi_dma_resume()
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Applied "spi: pxa2xx: Remove empty function pxa2xx_spi_dma_resume()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Remove empty function pxa2xx_spi_dma_resume()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer
  • From: "Bondarenko, Anton" <Anton_Bondarenko@xxxxxxxxxx>
• Re: [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers
  • From: "Bondarenko, Anton" <Anton_Bondarenko@xxxxxxxxxx>
• Re: [PATCH v2 2/8] spi: imx: replace fixed timeout with calculated one
  • From: "Bondarenko, Anton" <Anton_Bondarenko@xxxxxxxxxx>
• Re: [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: "Bondarenko, Anton" <Anton_Bondarenko@xxxxxxxxxx>
• Applied "spi: ath79: simplify iomem resource mapping" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: bitbang: switch to the generic implementation of transfer_one_message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: bitbang: switch to the generic implementation of transfer_one_message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 7/8] spi: imx: defer spi initialization, if DMA engine is pending
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/8] spi: imx: return error from dma channel request
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/8] spi: imx: replace fixed timeout with calculated one
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: Robin Gong <b38343@xxxxxxxxxxxxx>
• [PATCH 2/2] spi: bitbang: switch to the generic implementation of transfer_one_message
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] spi: bitbang: remove unneeded check
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH linux-next 0/4] mtd: spi-nor: fix Quad SPI memory support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH linux-next 0/4] mtd: spi-nor: fix Quad SPI memory support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH] spi: sh-msiof: Match renesas,rx-fifo-size in DT bindings doc with driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 0/10] Fix broken DMAFLUSHP on Rockchips platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH] spi: ath79: simplify iomem resource mapping
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7] arm64: dts: Add spi bus dts
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH] ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 1/2] spi: pxa2xx: Set the max_speed_hz of the master
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 2/2] spi: pxa2xx: Use ACPI_COMPANION() instead of acpi_bus_get_device()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Applied "spi: atmel: Remove needless bits_per_word and speed_hz tests" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: davinci: fix handling platform_get_irq result" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 2/8] spi: imx: replace fixed timeout with calculated one
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 1/8] spi: imx: Fix DMA transfer
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 4/8] spi: imx: add selection for iMX53 and iMX6 controller type
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 3/8] spi: imx: add support for all SPI word width for DMA transfer
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 5/8] spi: imx: Add support for loopback for ECSPI controllers
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 7/8] spi: imx: defer spi initialization, if DMA engine is pending
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 6/8] spi: imx: return error from dma channel request
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 8/8] spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• [PATCH v2 0/8] Improvements for SPI IMX driver for Freescale IMX53 and IMX6 families
  • From: Anton Bondarenko <anton_bondarenko@xxxxxxxxxx>
• Applied "spi: pxa2xx: Set the max_speed_hz of the master" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Use ACPI_COMPANION() instead of acpi_bus_get_device()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/2] spi: pxa2xx: Set the max_speed_hz of the master
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/2] spi: pxa2xx: Use ACPI_COMPANION() instead of acpi_bus_get_device()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH RESEND] spi: atmel: Remove needless bits_per_word and speed_hz tests
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [GIT PULL] SPI fixes for v4.3
  • From: Mark Brown <broonie@xxxxxxxxxxx>
• Re: Applied "spi: atmel: Remove needless bits_per_word and speed_hz tests" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 02/19] spi: davinci: fix handling platform_get_irq result
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: Applied "spi: atmel: Remove needless bits_per_word and speed_hz tests" to the asoc tree
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: spi-imx: wait_for_completion should timeout even in non-DMA transfer cases
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: xtensa-xtfpga: fix register endianness" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: xtensa-xtfpga: fix register endianness
  • From: Max Filippov <jcmvbkbc@xxxxxxxxx>
• Re: [PATCH v6 1/4] dt/bindings: bcm2835: spi: add bindings for the bcm2835 auxiliary spi devices
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH linux-next 1/4] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: spi-imx: wait_for_completion should timeout even in non-DMA transfer cases
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-imx: wait_for_completion should timeout even in non-DMA transfer cases
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: add transfer histogram statistics via sysfs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: meson: Fix module autoload for OF platform driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH linux-next 1/4] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RESEND PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] spi: meson: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt <luis@xxxxxxxxxxxxxxxxx>
• [PATCH linux-next 4/4] mtd: m25p80: add support of dual and quad spi protocols to all commands
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next 3/4] mtd: spi-nor: fix Quad SPI mode support for Spansion, Micron and Macronix
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next 2/4] mtd: spi-nor: properly detect the memory when it boots in Quad or Dual mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next 1/4] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next 0/4] mtd: spi-nor: fix Quad SPI memory support
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH] spi: atmel: remove warning when !CONFIG_PM_SLEEP
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• spi-imx: wait_for_completion should timeout even in non-DMA transfer cases
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Applied "spi: bitbang: Replace spinlock by mutex" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap-uwire: Remove needless bits_per_word and speed_hz tests" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap-100k: Rely on validations done by spi core" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mpc512x: Call mpc512x_psc_spi_transfer_setup() unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Remove duplicated register write" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Remove test for non-zero spi->max_speed_hz" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Remove needless if statements" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Remove two variables from struct chip_data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Remove cr0 variable from struct chip_data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Remove if statement that is always true in pump_transfers()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: au1550: Simplify au1550_spi_setupxfer()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: oc-tiny: Use of_property_read_u32 instead of open-coding it" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-bfin5xx: Calculate transfer speed unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bfin-sport: Calculate transfer speed unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm53xx: Adjust devm usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: fix wrong error return value on probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fix kernel-doc warnings in spi.h" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: txx9: Use transfer speed unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: Use transfer speed unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: octeon: Use transfer speed unconditionally" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 01/16] spi: txx9: Use transfer speed unconditionally
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] mtd: devices: m25p80: add support for mmap read request
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 2/5] spi: spi-ti-qspi: add mmap mode read support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [linux-next RFC v7 2/6] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [linux-next RFC v7 2/6] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• [linux-next RFC v7 4/6] mtd: m25p80: add support of dual and quad spi protocols to all commands
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 5/6] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 6/6] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 3/6] mtd: spi-nor: set the read op code and protocol based on the manufacturer
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 2/6] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 1/6] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [linux-next RFC v7 0/6] mtd: spi-nor: improve support of QSPI nor
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• resend [BUG] atmel: spi: scheduling while atomic
  • From: Jiří Prchal <jiri.prchal@xxxxxxxxxxx>
• Re: [PATCH 10/16] spi: atmel: Remove needless bits_per_word and speed_hz tests
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 16/16] spi: pxa2xx: Remove cr0 variable from struct chip_data
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 15/16] spi: pxa2xx: Remove if statement that is always true in pump_transfers()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 14/16] spi: pxa2xx: Remove two variables from struct chip_data
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 13/16] spi: spi-fsl-dspi: Remove duplicated register write
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 12/16] spi: dw: Remove test for non-zero spi->max_speed_hz
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 11/16] spi: dw: Remove needless if statements
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 10/16] spi: atmel: Remove needless bits_per_word and speed_hz tests
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 09/16] spi: omap-100k: Rely on validations done by spi core
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 08/16] spi: omap-uwire: Remove needless bits_per_word and speed_hz tests
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 07/16] spi: mpc512x: Call mpc512x_psc_spi_transfer_setup() unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 06/16] spi: au1550: Simplify au1550_spi_setupxfer()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 04/16] spi: bfin-sport: Calculate transfer speed unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 05/16] spi: spi-bfin5xx: Calculate transfer speed unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 03/16] spi: octeon: Use transfer speed unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 02/16] spi: s3c64xx: Use transfer speed unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 01/16] spi: txx9: Use transfer speed unconditionally
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [RESEND PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: fix kernel-doc warnings in spi.h
  • From: Geliang Tang <geliangtang@xxxxxxx>
• Re: [PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Applied "spi: s3c64xx: clean up runtime PM if driver registration fails" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: extend driver to make full use of runtime PM autosuspend" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: simplify suspend / resume handlers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: hardcode busnum to 0" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: remove unused rx_tail variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: always use a fixed number of CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx: replace custom io accessors with standard ones" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] mtd: devices: m25p80: add support for mmap read request
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/5] spi: spi-ti-qspi: add mmap mode read support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/4 RESEND v2] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: Add calls for pinctrl state select
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v5 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 03/10] DMA: pl330: add quirk for broken no flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 04/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3288 platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 05/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3xxx platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 07/10] DMA: pl330: implement dmaengine_get_quirks hook
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 08/10] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_quirks interface
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 01/10] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 02/10] Documentation: arm-pl330: add description of arm,pl330-broken-no-flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v5 0/10] Fix broken DMAFLUSHP on Rockchips platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH V2 6/6] spi/bcm63xx: move register definitions into the driver
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 5/6] spi/bcm63xx: move message control word description to register offsets
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 4/6] spi/bcm63xx: replace custom io accessors with standard ones
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 3/6] spi/bcm63xx: hardcode busnum to 0
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 2/6] spi/bcm63xx: always use a fixed number of CS
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 1/6] spi/bcm63xx: remove unused rx_tail variable
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH V2 0/6] spi/bcm63xx: cleanup and decouple from arch code
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH] spi: spidev: fix possible NULL dereference
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: fix possible NULL dereference
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spidev: fix possible NULL dereference
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: fix possible NULL dereference
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-sc18is602.c GPIO support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 08/10] spi: rockchip: modify DMA max burst to 1
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v6 4/4] ARM: bcm2835: enable auxiliary spi driver in defconfig
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v6 3/4] spi: bcm2835: add the auxiliary spi1 and spi2 to the device tree
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v6 1/4] dt/bindings: bcm2835: spi: add bindings for the bcm2835 auxiliary spi devices
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v6 0/4] spi: bcm2835: add spi-bcm2835aux driver
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 5/6] spi/bcm63xx: move register definitions into the driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi/bcm63xx: document device tree bindings
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH 5/6] spi/bcm63xx: move register definitions into the driver
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH 2/2] spi/bcm63xx: add support for probing through devicetree
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 1/2] spi/bcm63xx: document device tree bindings
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 5/6] spi/bcm63xx: move register definitions into the driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH 2/2] spi/bcm63xx: add support for probing through devicetree
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 1/2] spi/bcm63xx: document device tree bindings
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 0/2] spi/bcm63xx: add device tree support
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 6/6] spi/bcm63xx: move message control word description to register offsets
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 5/6] spi/bcm63xx: move register definitions into the driver
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 4/6] spi/bcm63xx: replace custom io accessors with standard ones
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 3/6] spi/bcm63xx: hardcode busnum to 0
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 2/6] spi/bcm63xx: always use a fixed number of CS
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 1/6] spi/bcm63xx: remove unused rx_tail variable
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH 0/6] spi/bcm63xx: cleanup and decouple from arch code
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH] spi: spidev: fix possible NULL dereference
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH linux-next v6 0/8] add driver for Atmel QSPI controller
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Applied "spi: bcm2835: BUG: fix wrong use of PAGE_MASK" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: remove warning when !CONFIG_PM_SLEEP" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH linux-next v6 4/8] mtd: spi-nor: use optimized commands for read/write/erase operations
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH linux-next v6 1/8] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH] spi: bcm2835: BUG: fix wrong use of PAGE_MASK
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH] spi: atmel: remove warning when !CONFIG_PM_SLEEP
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH linux-next v6 1/8] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH linux-next v6 1/8] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH linux-next v6 6/8] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 8/8] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 7/8] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 5/8] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 4/8] mtd: spi-nor: use optimized commands for read/write/erase operations
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 3/8] mtd: spi-nor: update the SPI protocol when enabling manufacturer Quad mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 2/8] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 1/8] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v6 0/8] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH] spi: oc-tiny: Use of_property_read_u32 instead of open-coding it
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Alexander Stein <alexanders83@xxxxxx>
• Re: [PATCH linux-next v5 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 4/6] spi: bcm2835: new driver implementing auxiliar spi1/spi2 on the bcm2835 soc
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [BUG] atmel: spi: scheduling while atomic
  • From: Jiří Prchal <jiri.prchal@xxxxxxxxxxx>
• Re: [PATCH v7] arm64: dts: Add spi bus dts
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Applied "spi: mediatek: fix spi cs polarity error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: mediatek: fix spi cs polarity error
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH RESEND 0/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v2] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v4 09/10] snd: dmaengine-pcm: add snd_dmaengine_pcm_get_quirks interface
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 10/10] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 07/10] DMA: pl330: implement dmaengine_get_quirks hook
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 08/10] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 06/10] dmaengine: add API for getting dma controller's quirk
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 05/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3xxx platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 04/10] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3288 platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 03/10] DMA: pl330: add quirk for broken no flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 02/10] Documentation: arm-pl330: add description of arm,pl330-broken-no-flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 01/10] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v4 0/10] Fix broken DMAFLUSHP on Rockchips platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND 0/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Alexey Klimov <klimov.linux@xxxxxxxxx>
• Applied "spi: Fix documentation of spi_alloc_master()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RESEND 0/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RESEND 1/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH RESEND 0/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• [PATCH RESEND 1/1] Revert "spi/doc: spi_master_put must be followed up by kfree"
  • From: Alexey Klimov <alexey.klimov@xxxxxxxxxx>
• Re: [PATCH] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Martin Sperl <martin@xxxxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Martin Sperl <martin@xxxxxxxxx>
• RE: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• [PATCH 1/6] soc: bcm2835: auxiliar devices enable infrastructure
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 2/6] ARM: bcm2835: add DT for the bcm2835 auxiliar devices
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 3/6] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 4/6] spi: bcm2835: new driver implementing auxiliar spi1/spi2 on the bcm2835 soc
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 5/6] ARM: bcm2835: enable building of spi-bcm2835aux driver in default config
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 6/6] dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v5 0/6] bcm2835: auxiliar device support for spi
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH 0/5] Add memory mapped read support for ti-qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/5] spi: spi-ti-qspi: add mmap mode read support
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 1/5] spi: introduce mmap read support for spi flash devices
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 3/5] mtd: devices: m25p80: add support for mmap read request
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 4/5] ARM: dts: DRA7: add entry for qspi mmap region
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 5/5] ARM: dts: AM4372: add entry for qspi mmap region
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/9] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH] spi: mediatek: fix wrong error return value on probe
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 4/4 RESEND v2] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/4 RESEND v2] spi: s3c64xx: simplify suspend / resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4 RESEND v2] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4 RESEND v2] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3 8/9] spi: rockchip: modify DMA max burst to 1
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 8/9] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH v3 8/9] spi: rockchip: modify DMA max burst to 1
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Abhimanyu Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Applied "spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: ARM: pxa: build error in arch/arm/plat-pxa/ssp.c
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: ARM: pxa: build error in arch/arm/plat-pxa/ssp.c
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: ARM: pxa: build error in arch/arm/plat-pxa/ssp.c
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 8/9] spi: rockchip: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 9/9] ASoC: rockchip_i2s: modify DMA max burst to 1
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 2/9] Documentation: arm-pl330: add description of arm,pl330-broken-no-flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 5/9] DMA: pl330: add quirk for broken no flushp
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 6/9] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3288 platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 7/9] ARM: dts: Add arm,pl330-broken-no-flushp quirk for rk3xxx platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 4/9] Documentation: rockchip-i2s: add description of rockchip,i2s-broken-burst-len
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 3/9] Documentation: spi-rockchip: add description of rockchip,spi-broken-burst-len
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 1/9] DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• [PATCH v3 0/9] Fix broken DMAFLUSHP on Rockchips platform
  • From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: ARM: pxa: build error in arch/arm/plat-pxa/ssp.c
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
  • From: Tan Jui Nee <jui.nee.tan@xxxxxxxxx>
• Re: [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Applied "spi: mediatek: remove clk_disable_unprepare()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: fix spi clock usage error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Mediatek: Document devicetree bindings update for spi bus" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [GIT PULL] spi updates for v4.3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Michael Welling <mwelling@xxxxxxxx>
• [PATCH v7] arm64: dts: Add spi bus dts
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 2/3] spi: mediatek: fix spi clock usage error
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 0/3] Fix Mediatek SPI bus driver clock usage error
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 1/3] spi: mediatek: remove clk_disable_unprepare()
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH 3/3] spi: Mediatek: Document devicetree bindings update for spi bus
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH v2] spi: bitbang: Replace spinlock by mutex
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: bitbang: Replace spinlock by mutex
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• [PATCH 2/2 v2] spi: spi-ep93xx: fix PTR_ERR problem
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH 2/2] spi: spi-ep93xx: change PTR_ERR argument
  • From: walter harms <wharms@xxxxxx>
• [PATCH 2/2] spi: spi-ep93xx: change PTR_ERR argument
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 0/2] change PTR_ERR argument
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH] spi: omap2-mcspi: add runtime PM to set_cs()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Applied "spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resource" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resource
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Applied "spi: fsl-(e)spi: simplify cleanup code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add DT bindings documentation for Netlogic XLP SPI controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/xlp: SPI controller driver for Netlogic XLP SoCs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-espi: add runtime PM" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Fwd: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Not really following Mark Brown's spidev patch
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• Applied "spi: mediatek: fix SPI_CMD_PAUSE_IE macro error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Not really following Mark Brown's spidev patch
  • From: Brian Hutchinson <b.hutchman@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: mediatek: fix SPI_CMD_PAUSE_IE macro error
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v2 2/2] spi: Add DT bindings documentation for Netlogic XLP SPI controller
  • From: <kamlakant.patel@xxxxxxxxxxxx>
• [PATCH v2 1/2] spi/xlp: SPI controller driver for Netlogic XLP SoCs
  • From: <kamlakant.patel@xxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: punnaiah choudary kalluri <punnaia@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: Not really following Mark Brown's spidev patch
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• Re: [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: punnaiah choudary kalluri <punnaia@xxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• [PATCH v2 3/3] spi: fsl-espi: add runtime PM
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH linux-next v5 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: punnaiah choudary kalluri <punnaia@xxxxxxxxxx>
• Re: [PATCH linux-next v5 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Jagan Teki <jteki@xxxxxxxxxxxx>
• [PATCH linux-next v5 0/5] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v5 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v5 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v5 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v5 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v5 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: Add DT bindings documentation for Netlogic XLP SPI controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• [LINUX RFC v2 4/4] spi: zynqmp: gqspi: add support for dual parallel mode configuration
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC v2 3/4] spi-nor: add dual parallel mode support
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC v2 0/4] spi: add dual parallel mode support in Zynq MPSoC GQSPI controller
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC v2 1/4] spi: add support of two chip selects & data stripe
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• [LINUX RFC v2 2/4] mtd: add spi_device instance to spi_nor struct
  • From: Ranjit Waghmode <ranjit.waghmode@xxxxxxxxxx>
• Re: [PATCH v4 4/5] spi: bcm2835: new driver implementing auxiliar spi1/spi2 on the bcm2835 soc
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] soc: bcm2835: auxiliar devices enable infrastructure
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Not really following Mark Brown's spidev patch
  • From: Brian Hutchinson <b.hutchman@xxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Applied "spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: add PM clk_prepare_enable fail flow" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: replace *_time name" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: add linux/io.h include file" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/bcm63xx-hsspi: add support for dual spi read/write" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: fsl-espi: add runtime PM
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH] spi: ti-qspi: use 128 bit transfer mode for writing to flash
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Bean Huo 霍斌斌 (beanhuo) <beanhuo@xxxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH linux-next v4 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI
  • From: santosh shilimkar <santosh.shilimkar@xxxxxxxxxx>
• Re: [RESEND][PATCH 4/4] ARM: dts: keystone: Add ti,keystone-spi for SPI
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH linux-next v4 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH linux-next v4 5/5] mtd: atmel-quadspi: add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v4 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v4 3/5] mtd: spi-nor: allow to tune the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v4 2/5] Documentation: mtd: add a DT property to set the number of dummy cycles
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v4 1/5] mtd: spi-nor: notify (Q)SPI controller about protocol change
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH linux-next v4 0/5] add driver for Atmel QSPI controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/5] soc: bcm2835: auxiliar devices enable infrastructure
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v4 2/5] ARM: bcm2835: add DT for the bcm2835 auxiliar devices
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v4 3/5] dt/bindings: bcm2835: add binding documentation for bcm2835-aux
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v4 4/5] spi: bcm2835: new driver implementing auxiliar spi1/spi2 on the bcm2835 soc
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v4 5/5] dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v4 0/5] bcm2835: auxiliar device support for spi
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v3 1/4] spi: mediatek: add linux/io.h include file
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 2/4] spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 4/4] spi: mediatek: replace *_time name
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH v3 3/4] spi: mediatek: add PM clk_prepare_enable fail flow
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCHi v3 0/4] Fixup mediatek spi driver
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• [PATCH V2] spi/bcm63xx-hsspi: add support for dual spi read/write
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH] spi/bcm63xx-hsspi: add support for dual spi read/write
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• [PATCH] spi/bcm63xx-hsspi: add support for dual spi read/write
  • From: Jonas Gorski <jogo@xxxxxxxxxxx>
• Re: [PATCH 2/2 RESEND] staging/fbtft: use spi_setup instead of direct call to master->setup
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH 2/2 RESEND] staging/fbtft: use spi_setup instead of direct call to master->setup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 1/2 RESEND] spi: check bits_per_word in spi_setup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 0/2 RESEND] Fix displays requiring 9 bit transfers on RPi
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 3/3] spi: fsl-espi: add runtime PM
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] spi: fsl-(e)spi: simplify cleanup code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/3] spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/3] spi: fsl-(e)spi: Migrate to devm_ functions and add runtime PM
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 4/4 RESEND v2] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4 RESEND v2] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 3/4 RESEND v2] spi: s3c64xx: simplify suspend / resume handlers
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4 RESEND v2] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 4/4 RESEND v2] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4 RESEND v2] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Allow interface drivers to limit data I/O to word sizes" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt: snps,dw-apb-ssi: Document new I/O data register width property" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fall back to master maximum speed if no slave speed specified" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Fall back to master maximum speed if no slave speed specified
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: Applied "spi: sunxi: fix transfer timeout" to the spi tree
  • From: Michal Suchanek <hramrach@xxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [alsa-devel] Fwd: [PATCH 1/1] SPI : spi-pxa2xx : fix spi init of WM510205 codec via ACPI (resend)
  • From: Christian Hartmann <cornogle@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4 RESEND] spi: s3c64xx: replace clock disabling with runtime PM suspend call in remove function
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/4 RESEND] spi: s3c64xx: simplify suspend / resume handlers
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 2/4 RESEND] spi: s3c64xx: extend driver to make full use of runtime PM autosuspend
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/4 RESEND] spi: s3c64xx: clean up runtime PM if driver registration fails
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: sunxi: fix transfer timeout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] nand: Add NAND driver for Mikrotik RB4xx series boards
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 00/18] Export SPI and OF module aliases in missing drivers
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/18] spi: (RFC, don't apply) report OF style modalias when probing using DT
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/9] spi: sunxi: check that transfer speed is non-zero
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/18] Export SPI and OF module aliases in missing drivers
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH 1/9] spi: sunxi: fix transfer timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>