Re: [PATCH v2 1/5] spi: introduce mmap read support for spi flash devices

[Michal Suchanek <hramrach@xxxxxxxxx>]

On 3 November 2015 at 11:06, Vignesh R <vigneshr@xxxxxx> wrote:
> In addition to providing direct access to SPI bus, some spi controller
> hardwares (like ti-qspi) provide special memory mapped port
> to accesses SPI flash devices in order to increase read performance.
> This means the controller can automatically send the SPI signals
> required to read data from the SPI flash device.
> For this, spi controller needs to know flash specific information like
> read command to use, dummy bytes and address width. Once these settings
> are populated in hardware registers, any read accesses to flash's memory
> map region(SoC specific) through memcpy (or mem-to mem DMA copy) will be
> handled by controller hardware. The hardware will automatically generate
> SPI signals required to read data from flash and present it to CPU/DMA.
>
> Introduce spi_mtd_mmap_read() interface to support memory mapped read
> over SPI flash devices. SPI master drivers can implement this callback to
> support memory mapped read interfaces. m25p80 flash driver and other
> flash drivers can call this to request memory mapped read. The interface
> should only be used MTD flashes and cannot be used with other SPI devices.
>
> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
> ---
>  drivers/spi/spi.c       | 35 +++++++++++++++++++++++++++++++++++
>  include/linux/spi/spi.h | 23 +++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
>
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index a5f53de813d3..5a5c7a7d47f2 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -1059,6 +1059,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
>                 }
>         }
>
> +       mutex_lock(&master->mmap_lock_mutex);
>         trace_spi_message_start(master->cur_msg);
>
>         if (master->prepare_message) {
> @@ -1068,6 +1069,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
>                                 "failed to prepare message: %d\n", ret);
>                         master->cur_msg->status = ret;
>                         spi_finalize_current_message(master);
> +                       mutex_unlock(&master->mmap_lock_mutex);
>                         return;
>                 }
>                 master->cur_msg_prepared = true;
> @@ -1077,6 +1079,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
>         if (ret) {
>                 master->cur_msg->status = ret;
>                 spi_finalize_current_message(master);
> +               mutex_unlock(&master->mmap_lock_mutex);
>                 return;
>         }
>
> @@ -1084,8 +1087,10 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
>         if (ret) {
>                 dev_err(&master->dev,
>                         "failed to transfer one message from queue\n");
> +               mutex_unlock(&master->mmap_lock_mutex);
>                 return;
>         }
> +       mutex_unlock(&master->mmap_lock_mutex);
>  }
>
>  /**
> @@ -1732,6 +1737,7 @@ int spi_register_master(struct spi_master *master)
>         spin_lock_init(&master->queue_lock);
>         spin_lock_init(&master->bus_lock_spinlock);
>         mutex_init(&master->bus_lock_mutex);
> +       mutex_init(&master->mmap_lock_mutex);
>         master->bus_lock_flag = 0;
>         init_completion(&master->xfer_completion);
>         if (!master->max_dma_len)
> @@ -2237,6 +2243,35 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
>  EXPORT_SYMBOL_GPL(spi_async_locked);
>
>
> +int spi_mtd_mmap_read(struct spi_device *spi, loff_t from, size_t len,
> +                     size_t *retlen, u_char *buf, u8 read_opcode,
> +                     u8 addr_width, u8 dummy_bytes)
> +
> +{
> +       struct spi_master *master = spi->master;
> +       int ret;
> +
> +       if (master->auto_runtime_pm) {
> +               ret = pm_runtime_get_sync(master->dev.parent);
> +               if (ret < 0) {
> +                       dev_err(&master->dev, "Failed to power device: %d\n",
> +                               ret);
> +                       goto err;
> +               }
> +       }
> +       mutex_lock(&master->mmap_lock_mutex);
> +       ret = master->spi_mtd_mmap_read(spi, from, len, retlen, buf,
> +                                       read_opcode, addr_width,
> +                                       dummy_bytes);
> +       mutex_unlock(&master->mmap_lock_mutex);
> +       if (master->auto_runtime_pm)
> +               pm_runtime_put(master->dev.parent);
> +
> +err:
> +       return ret;
> +}
> +EXPORT_SYMBOL_GPL(spi_mtd_mmap_read);
> +
>  /*-------------------------------------------------------------------------*/
>
>  /* Utility methods for SPI master protocol drivers, layered on
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index 6b00f18f5e6b..0a6d8ad57357 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -297,6 +297,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
>   * @flags: other constraints relevant to this driver
>   * @bus_lock_spinlock: spinlock for SPI bus locking
>   * @bus_lock_mutex: mutex for SPI bus locking
> + * @mmap_lock_mutex: mutex for locking SPI bus when mmap transfer is on.

Any reason to not use the bus_lock_mutex here? The bus is busy as much
during mmap transfer as it is during any other transfer.

Thanks

Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html