Allow transfers to set the transmission speed rather than using the device max_speed_hz value. The SPI core makes sure that the speed_hz value is always set on the transfer. Signed-off-by: Marcus Weseloh <mweseloh42@xxxxxxxxx> --- Changes from v1: * Remove fallback to spi->max_speed_hz and sanity checks (as requested by Mark Brown) * Also patch identical code in sun6i-spi.c --- drivers/spi/spi-sun4i.c | 8 ++++---- drivers/spi/spi-sun6i.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index fbb0a4d..f60a6d6 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -229,8 +229,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master, /* Ensure that we have a parent clock fast enough */ mclk_rate = clk_get_rate(sspi->mclk); - if (mclk_rate < (2 * spi->max_speed_hz)) { - clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); + if (mclk_rate < (2 * tfr->speed_hz)) { + clk_set_rate(sspi->mclk, 2 * tfr->speed_hz); mclk_rate = clk_get_rate(sspi->mclk); } @@ -248,14 +248,14 @@ static int sun4i_spi_transfer_one(struct spi_master *master, * First try CDR2, and if we can't reach the expected * frequency, fall back to CDR1. */ - div = mclk_rate / (2 * spi->max_speed_hz); + div = mclk_rate / (2 * tfr->speed_hz); if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) { if (div > 0) div--; reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS; } else { - div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); + div = ilog2(mclk_rate) - ilog2(tfr->speed_hz); reg = SUN4I_CLK_CTL_CDR1(div); } diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index ac48f59..42e2c4b 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -217,8 +217,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master, /* Ensure that we have a parent clock fast enough */ mclk_rate = clk_get_rate(sspi->mclk); - if (mclk_rate < (2 * spi->max_speed_hz)) { - clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); + if (mclk_rate < (2 * tfr->speed_hz)) { + clk_set_rate(sspi->mclk, 2 * tfr->speed_hz); mclk_rate = clk_get_rate(sspi->mclk); } @@ -236,14 +236,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master, * First try CDR2, and if we can't reach the expected * frequency, fall back to CDR1. */ - div = mclk_rate / (2 * spi->max_speed_hz); + div = mclk_rate / (2 * tfr->speed_hz); if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { if (div > 0) div--; reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS; } else { - div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); + div = ilog2(mclk_rate) - ilog2(tfr->speed_hz); reg = SUN6I_CLK_CTL_CDR1(div); } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html