Re: [PATCH v2] SPI: s3c64xx: pass DMA arguments in platform data

[Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>]

On 18.11.2015 00:48, Arnd Bergmann wrote:
> The s3c64xx platform data already contains a pointer to the
> DMA filter function, but not to the associated data.
> 
> This simplifies the code and makes it more generic by
> passing the data along with the filter function like
> we do for other drivers.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> This version is now independent of the ASoC changes.
> 
> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
> index a9d535ffdfaa..9a3c090d2427 100644
> --- a/arch/arm/plat-samsung/devs.c
> +++ b/arch/arm/plat-samsung/devs.c
> @@ -1105,9 +1105,7 @@ struct platform_device s3c_device_wdt = {
>  #ifdef CONFIG_S3C64XX_DEV_SPI0
>  static struct resource s3c64xx_spi0_resource[] = {
>  	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
> -	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
> -	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
> -	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
> +	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
>  };
>  
>  struct platform_device s3c64xx_device_spi0 = {
> @@ -1135,11 +1133,13 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
>  	pd.num_cs = num_cs;
>  	pd.src_clk_nr = src_clk_nr;
>  	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
> -#if defined(CONFIG_PL330_DMA)
> -	pd.filter = pl330_filter;
> -#elif defined(CONFIG_S3C64XX_PL080)

Hmm.... why removing pl330_filter? Is it because of lack of channel
names? It looks unrelated to this patch.

> +#if defined(CONFIG_S3C64XX_PL080)
> +	pd.dma_tx = (void *)DMACH_SPI0_TX;
> +	pd.dma_rx = (void *)DMACH_SPI0_RX;
>  	pd.filter = pl08x_filter_id;
>  #elif defined(CONFIG_S3C24XX_DMAC)
> +	pd.dma_tx = (void *)DMACH_SPI0_TX;
> +	pd.dma_rx = (void *)DMACH_SPI0_RX;
>  	pd.filter = s3c24xx_dma_filter;
>  #endif
>  
> @@ -1150,9 +1150,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
>  #ifdef CONFIG_S3C64XX_DEV_SPI1
>  static struct resource s3c64xx_spi1_resource[] = {
>  	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
> -	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
> -	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
> -	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
> +	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
>  };
>  
>  struct platform_device s3c64xx_device_spi1 = {
> @@ -1180,9 +1178,9 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
>  	pd.num_cs = num_cs;
>  	pd.src_clk_nr = src_clk_nr;
>  	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
> -#if defined(CONFIG_PL330_DMA)
> -	pd.filter = pl330_filter;
> -#elif defined(CONFIG_S3C64XX_PL080)
> +#if defined(CONFIG_S3C64XX_PL080)
> +	pd.dma_tx = (void *)DMACH_SPI1_TX;
> +	pd.dma_rx = (void *)DMACH_SPI1_RX;
>  	pd.filter = pl08x_filter_id;
>  #endif
>  
> @@ -1193,9 +1191,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
>  #ifdef CONFIG_S3C64XX_DEV_SPI2
>  static struct resource s3c64xx_spi2_resource[] = {
>  	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
> -	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
> -	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
> -	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
> +	[1] = DEFINE_RES_IRQ(IRQ_SPI2),
>  };
>  
>  struct platform_device s3c64xx_device_spi2 = {
> @@ -1223,9 +1219,9 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
>  	pd.num_cs = num_cs;
>  	pd.src_clk_nr = src_clk_nr;
>  	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
> -#if defined(CONFIG_PL330_DMA)
> -	pd.filter = pl330_filter;
> -#elif defined(CONFIG_S3C64XX_PL080)
> +#if defined(CONFIG_S3C64XX_PL080)
> +	pd.dma_tx = (void *)DMACH_SPI2_TX;
> +	pd.dma_rx = (void *)DMACH_SPI2_RX;
>  	pd.filter = pl08x_filter_id;
>  #endif
>  
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index 8e86e7f6663a..8b7499623957 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -133,7 +133,6 @@
>  struct s3c64xx_spi_dma_data {
>  	struct dma_chan *ch;
>  	enum dma_transfer_direction direction;
> -	unsigned int dmach;
>  };
>  
>  /**
> @@ -325,7 +324,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
>  
>  		/* Acquire DMA channels */
>  		sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
> -				   (void *)(long)sdd->rx_dma.dmach, dev, "rx");
> +				   sdd->cntrlr_info->dma_rx, dev, "rx");
>  		if (!sdd->rx_dma.ch) {
>  			dev_err(dev, "Failed to get RX DMA channel\n");
>  			ret = -EBUSY;
> @@ -334,7 +333,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
>  		spi->dma_rx = sdd->rx_dma.ch;
>  
>  		sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
> -				   (void *)(long)sdd->tx_dma.dmach, dev, "tx");
> +				   sdd->cntrlr_info->dma_tx, dev, "tx");
>  		if (!sdd->tx_dma.ch) {
>  			dev_err(dev, "Failed to get TX DMA channel\n");
>  			ret = -EBUSY;
> @@ -1028,7 +1027,6 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
>  static int s3c64xx_spi_probe(struct platform_device *pdev)
>  {
>  	struct resource	*mem_res;
> -	struct resource	*res;
>  	struct s3c64xx_spi_driver_data *sdd;
>  	struct s3c64xx_spi_info *sci = dev_get_platdata(&pdev->dev);
>  	struct spi_master *master;
> @@ -1087,20 +1085,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  
>  	sdd->cur_bpw = 8;
>  
> -	if (!sdd->pdev->dev.of_node) {
> -		res = platform_get_resource(pdev, IORESOURCE_DMA,  0);
> -		if (!res) {
> -			dev_warn(&pdev->dev, "Unable to get SPI tx dma resource. Switching to poll mode\n");
> -			sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
> -		} else
> -			sdd->tx_dma.dmach = res->start;
> -
> -		res = platform_get_resource(pdev, IORESOURCE_DMA,  1);
> -		if (!res) {
> -			dev_warn(&pdev->dev, "Unable to get SPI rx dma resource. Switching to poll mode\n");
> -			sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
> -		} else
> -			sdd->rx_dma.dmach = res->start;
> +	if (sci && (!sci->dma_tx || !sci->dma_rx)) {

No need for "sci" check. It cannot be NULL at this point - at the
beginning of probe it is checked already.

> +		dev_warn(&pdev->dev, "Unable to get SPI tx data. Switching to poll mode\n");

The message could be now more precise, like:
"Unable to get SPI rx or tx data. Switching to poll mode\n"

> +		sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL;
>  	}

The logic here is now different for DT boards. Previously such board
would not be marked as polling. Now it is always polling. If needed,
split it to separate patch.

>  
>  	sdd->tx_dma.direction = DMA_MEM_TO_DEV;
> @@ -1197,9 +1184,10 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  
>  	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
>  					sdd->port_id, master->num_chipselect);
> -	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%d, Tx-%d]\n",
> +	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%p, Tx-%p]\n",
>  					mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1,
> -					sdd->rx_dma.dmach, sdd->tx_dma.dmach);
> +					sdd->cntrlr_info->dma_rx,
> +					sdd->cntrlr_info->dma_tx);

sci->dma_rx and sci->dma_tx would be equivalent but shorter.

Best regards,
Krzysztof

>  
>  	pm_runtime_mark_last_busy(&pdev->dev);
>  	pm_runtime_put_autosuspend(&pdev->dev);
> diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
> index d3889b98a1a1..fb5625bcca9a 100644
> --- a/include/linux/platform_data/spi-s3c64xx.h
> +++ b/include/linux/platform_data/spi-s3c64xx.h
> @@ -40,6 +40,8 @@ struct s3c64xx_spi_info {
>  	int num_cs;
>  	int (*cfg_gpio)(void);
>  	dma_filter_fn filter;
> +	void *dma_tx;
> +	void *dma_rx;
>  };
>  
>  /**
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html