On 19.08.2015 06:05, Heiner Kallweit wrote: > Simplify the probe function by replacing all occurrences of &pdev->dev > with a local variable. > > Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> > --- > drivers/spi/spi-s3c64xx.c | 58 +++++++++++++++++++++++------------------------ > 1 file changed, 29 insertions(+), 29 deletions(-) I don't see simplification here (the same number of insertions as deletions, code is exactly the same). &pdev->dev is a common pattern in most of platform drivers. Best regards, Krzysztof > > diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c > index cd1cfac..c4d3b06 100644 > --- a/drivers/spi/spi-s3c64xx.c > +++ b/drivers/spi/spi-s3c64xx.c > @@ -1024,39 +1024,39 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( > > static int s3c64xx_spi_probe(struct platform_device *pdev) > { > + struct device *dev = &pdev->dev; > struct resource *mem_res; > struct resource *res; > struct s3c64xx_spi_driver_data *sdd; > - struct s3c64xx_spi_info *sci = dev_get_platdata(&pdev->dev); > + struct s3c64xx_spi_info *sci = dev_get_platdata(dev); > struct spi_master *master; > int ret, irq; > char clk_name[16]; > > - if (!sci && pdev->dev.of_node) { > - sci = s3c64xx_spi_parse_dt(&pdev->dev); > + if (!sci && dev->of_node) { > + sci = s3c64xx_spi_parse_dt(dev); > if (IS_ERR(sci)) > return PTR_ERR(sci); > } > > if (!sci) { > - dev_err(&pdev->dev, "platform_data missing!\n"); > + dev_err(dev, "platform_data missing!\n"); > return -ENODEV; > } > > mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > if (mem_res == NULL) { > - dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); > + dev_err(dev, "Unable to get SPI MEM resource\n"); > return -ENXIO; > } > > irq = platform_get_irq(pdev, 0); > if (irq < 0) { > - dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq); > + dev_warn(dev, "Failed to get IRQ: %d\n", irq); > return irq; > } > > - master = spi_alloc_master(&pdev->dev, > - sizeof(struct s3c64xx_spi_driver_data)); > + master = spi_alloc_master(dev, sizeof(struct s3c64xx_spi_driver_data)); > if (master == NULL) { > dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); > return -ENOMEM; > @@ -1071,9 +1071,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > sdd->pdev = pdev; > sdd->sfr_start = mem_res->start; > if (pdev->dev.of_node) { > - ret = of_alias_get_id(pdev->dev.of_node, "spi"); > + ret = of_alias_get_id(dev->of_node, "spi"); > if (ret < 0) { > - dev_err(&pdev->dev, "failed to get alias id, errno %d\n", > + dev_err(dev, "failed to get alias id, errno %d\n", > ret); > goto err0; > } > @@ -1087,14 +1087,14 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > if (!sdd->pdev->dev.of_node) { > res = platform_get_resource(pdev, IORESOURCE_DMA, 0); > if (!res) { > - dev_warn(&pdev->dev, "Unable to get SPI tx dma resource. Switching to poll mode\n"); > + dev_warn(dev, "Unable to get SPI tx dma resource. Switching to poll mode\n"); > sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; > } else > sdd->tx_dma.dmach = res->start; > > res = platform_get_resource(pdev, IORESOURCE_DMA, 1); > if (!res) { > - dev_warn(&pdev->dev, "Unable to get SPI rx dma resource. Switching to poll mode\n"); > + dev_warn(dev, "Unable to get SPI rx dma resource. Switching to poll mode\n"); > sdd->port_conf->quirks = S3C64XX_SPI_QUIRK_POLL; > } else > sdd->rx_dma.dmach = res->start; > @@ -1103,7 +1103,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > sdd->tx_dma.direction = DMA_MEM_TO_DEV; > sdd->rx_dma.direction = DMA_DEV_TO_MEM; > > - master->dev.of_node = pdev->dev.of_node; > + master->dev.of_node = dev->of_node; > master->bus_num = sdd->port_id; > master->setup = s3c64xx_spi_setup; > master->cleanup = s3c64xx_spi_cleanup; > @@ -1121,43 +1121,43 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > if (!is_polling(sdd)) > master->can_dma = s3c64xx_spi_can_dma; > > - sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res); > + sdd->regs = devm_ioremap_resource(dev, mem_res); > if (IS_ERR(sdd->regs)) { > ret = PTR_ERR(sdd->regs); > goto err0; > } > > if (sci->cfg_gpio && sci->cfg_gpio()) { > - dev_err(&pdev->dev, "Unable to config gpio\n"); > + dev_err(dev, "Unable to config gpio\n"); > ret = -EBUSY; > goto err0; > } > > /* Setup clocks */ > - sdd->clk = devm_clk_get(&pdev->dev, "spi"); > + sdd->clk = devm_clk_get(dev, "spi"); > if (IS_ERR(sdd->clk)) { > - dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); > + dev_err(dev, "Unable to acquire clock 'spi'\n"); > ret = PTR_ERR(sdd->clk); > goto err0; > } > > if (clk_prepare_enable(sdd->clk)) { > - dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); > + dev_err(dev, "Couldn't enable clock 'spi'\n"); > ret = -EBUSY; > goto err0; > } > > sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr); > - sdd->src_clk = devm_clk_get(&pdev->dev, clk_name); > + sdd->src_clk = devm_clk_get(dev, clk_name); > if (IS_ERR(sdd->src_clk)) { > - dev_err(&pdev->dev, > + dev_err(dev, > "Unable to acquire clock '%s'\n", clk_name); > ret = PTR_ERR(sdd->src_clk); > goto err2; > } > > if (clk_prepare_enable(sdd->src_clk)) { > - dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name); > + dev_err(dev, "Couldn't enable clock '%s'\n", clk_name); > ret = -EBUSY; > goto err2; > } > @@ -1168,10 +1168,10 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > spin_lock_init(&sdd->lock); > init_completion(&sdd->xfer_completion); > > - ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0, > + ret = devm_request_irq(dev, irq, s3c64xx_spi_irq, 0, > "spi-s3c64xx", sdd); > if (ret != 0) { > - dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n", > + dev_err(dev, "Failed to request IRQ %d: %d\n", > irq, ret); > goto err3; > } > @@ -1180,18 +1180,18 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) > S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, > sdd->regs + S3C64XX_SPI_INT_EN); > > - pm_runtime_set_active(&pdev->dev); > - pm_runtime_enable(&pdev->dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > > - ret = devm_spi_register_master(&pdev->dev, master); > + ret = devm_spi_register_master(dev, master); > if (ret != 0) { > - dev_err(&pdev->dev, "cannot register SPI master: %d\n", ret); > + dev_err(dev, "cannot register SPI master: %d\n", ret); > goto err3; > } > > - dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", > + dev_dbg(dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", > sdd->port_id, master->num_chipselect); > - dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%d, Tx-%d]\n", > + dev_dbg(dev, "\tIOmem=[%pR]\tFIFO %dbytes\tDMA=[Rx-%d, Tx-%d]\n", > mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1, > sdd->rx_dma.dmach, sdd->tx_dma.dmach); > > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html