Linux Serial

• Thread Index

• Re: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Michael Walle
• Re: [PATCH 1/2] tty: serial: fsl_lpuart: correct the count of break characters
  • From: Michael Walle
• [syzbot] Internal error in io_serial_out (2)
  • From: syzbot
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Sherry Sun
• [PATCH 1/2] tty: serial: fsl_lpuart: correct the count of break characters
  • From: Sherry Sun
• [PATCH 0/2] fsl_lpuart: fix the bugs in received break signal count and send break signal
  • From: Sherry Sun
• Re: [PATCH -next v3] serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  • From: Florian Fainelli
• [PATCH -next v3] serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  • From: Guo Mengqi
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• RE: [EXT] Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• Re: [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• Re: [PATCH v2] tty: 8250: Add support for Brainboxes PX cards.
  • From: Greg KH
• Re: [V5] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• RE: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Datta, Shubhrajyoti
• Re: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Michal Simek
• Re: [V5] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Jiri Slaby
• [PATCH v3] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Florian Fainelli
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• Re: [PATCH v3] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Andy Shevchenko
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• [PATCH v3] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Vamshi Gajjela
• Re: [PATCH v2] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Vamshi Gajjela
• Re: [PATCH] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Andy Shevchenko
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: [PATCH] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: VAMSHI GAJJELA
• Re: [PATCH -next] drivers/tty/serial: Add missing clk_disable_unprepare()
  • From: guomengqi (A)
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• RE: [PATCH] tty: serial: samsung_tty: fix s3c24xx_serial_set_mctrl()
  • From: Chanho Park
• RE: [PATCH v3] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [PATCH] tty: serial: samsung_tty: fix s3c24xx_serial_set_mctrl()
  • From: Krzysztof Kozlowski
• Re: [V5] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• [PATCH] tty: serial: samsung_tty: fix s3c24xx_serial_set_mctrl()
  • From: Marek Szyprowski
• Re: [PATCH v3] tty: serial: samsung_tty: loopback mode support
  • From: Marek Szyprowski
• Re: [PATCH] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Andy Shevchenko
• [PATCH] serial: 8250_dw: Avoid pslverr on reading empty receiver fifo
  • From: Vamshi Gajjela
• Re: [V4] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [V5] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Greg KH
• [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Marek Behún
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Marek Behún
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: m . brock
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• Re: [PATCH -next] drivers/tty/serial: Add missing clk_disable_unprepare()
  • From: Florian Fainelli
• RE: [PATCH v3] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• Re: [PATCH v8 03/16] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Stephen Boyd
• Re: [V4] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• [V4] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [PATCH v2] tty: 8250: Add support for Brainboxes PX cards.
  • From: Cameron Williams
• Re: [PATCH] tty: 8250: Add support for Brainboxes PX cards.
  • From: Greg KH
• Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [PATCH] tty: 8250: Add support for Brainboxes PX cards.
  • From: Cameron Williams
• Re: [PATCH v8 09/16] reset: npcm: Add NPCM8XX support
  • From: Philipp Zabel
• Re: [PATCH v8 08/16] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Philipp Zabel
• [PATCH v8 01/16] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v8 02/16] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v8 11/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v8 06/16] ARM: dts: nuvoton: add reset syscon property
  • From: Tomer Maimon
• [PATCH v8 12/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon
• [PATCH v8 07/16] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• [PATCH v8 16/16] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon
• [PATCH v8 15/16] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon
• [PATCH v8 14/16] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon
• [PATCH v8 09/16] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon
• [PATCH v8 13/16] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v8 10/16] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon
• [PATCH v8 08/16] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• [PATCH v8 05/16] dt-bindings: reset: npcm: add GCR syscon property
  • From: Tomer Maimon
• [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH v8 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v8 03/16] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• Re: [PATCH v3] tty: serial: samsung_tty: loopback mode support
  • From: Marek Szyprowski
• Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Serge Semin
• Re: [PATCH] serial: 8250: SERIAL_8250_ASPEED_VUART should depend on ARCH_ASPEED
  • From: Jeremy Kerr
• [PATCH] serial: 8250: SERIAL_8250_ASPEED_VUART should depend on ARCH_ASPEED
  • From: Geert Uytterhoeven
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Sergey Senozhatsky
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Petr Mladek
• Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Florian Fainelli
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Andy Shevchenko
• Re: [PATCH v4 0/8] Fixes and cleanup for RS485
  • From: Lino Sanfilippo
• Re: [PATCH v4 0/8] Fixes and cleanup for RS485
  • From: Andy Shevchenko
• [PATCH v4 4/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Lino Sanfilippo
• [PATCH v4 3/8] serial: core, 8250: set RS485 termination GPIO in serial core
  • From: Lino Sanfilippo
• [PATCH v4 0/8] Fixes and cleanup for RS485
  • From: Lino Sanfilippo
• [PATCH v4 1/8] serial: ar933x: Fix check for RS485 support
  • From: Lino Sanfilippo
• [PATCH v4 6/8] dt_bindings: rs485: Correct delay values
  • From: Lino Sanfilippo
• [PATCH v4 5/8] serial: core: sanitize RS485 delays read from device tree
  • From: Lino Sanfilippo
• [PATCH v4 2/8] serial: ar933x: Remove superfluous code in ar933x_config_rs485()
  • From: Lino Sanfilippo
• [PATCH v4 7/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• [PATCH v4 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• Re: [PATCH v3 3/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: kernel test robot
• [PATCH v3 0/8] Fixes and cleanup for RS485
  • From: Lino Sanfilippo
• [PATCH v3 3/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• [PATCH v3 6/8] dt_bindings: rs485: Correct delay values
  • From: Lino Sanfilippo
• [PATCH v3 7/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• [PATCH v3 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• [PATCH v3 2/8] serial: ar933x: Remove superfluous code in ar933x_config_rs485()
  • From: Lino Sanfilippo
• [PATCH v3 4/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Lino Sanfilippo
• [PATCH v3 1/8] serial: ar933x: Fix check for RS485 support
  • From: Lino Sanfilippo
• [PATCH v3 5/8] serial: core: sanitize RS485 delays read from device tree
  • From: Lino Sanfilippo
• RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Biju Das
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS a501ab75e7624d133a5a3c7ec010687c8b961d23
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 7e5b4322cde067e1d0f1bf8f490e93f664a7c843
  • From: kernel test robot
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• [PATCH V1 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: shenwei . wang
• [PATCH 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: shenwei . wang
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Pali Rohár
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Andy Shevchenko
• Re: [PATCH] Revert "kernfs: Change kernfs_notify_list to llist."
  • From: Andy Shevchenko
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Pali Rohár
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Andy Shevchenko
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Pali Rohár
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Arnd Bergmann
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Pali Rohár
• Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Greg KH
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Greg Kroah-Hartman
• Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0
  • From: Dan Carpenter
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: John Ogness
• Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Joel Stanley
• Re: [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• Re: PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• PNP0501 serial driver takes almost 2 seconds to suspend/resume (printk issue)
  • From: Todd Brandt
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [V3] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation
  • From: Greg Kroah-Hartman
• Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Florian Fainelli
• Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation
  • From: Marek Behún
• Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST
  • From: Greg Kroah-Hartman
• Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST
  • From: Marek Behún
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Greg Kroah-Hartman
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Marek Behún
• Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Marek Behún
• Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Marek Behún
• Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow
  • From: Marek Behún
• Re: [PATCH 7/7] USB: serial: ftdi_sio: Fill c_*speed fields with real baudrate
  • From: Greg Kroah-Hartman
• Re: [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST
  • From: Greg Kroah-Hartman
• Re: [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow
  • From: Greg Kroah-Hartman
• Re: [PATCH 0/7] ftdi_sio driver improvements
  • From: Greg Kroah-Hartman
• Re: [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Greg Kroah-Hartman
• [PATCH 6/7] USB: serial: ftdi_sio: Fix custom_divisor and c_*speed for ASYNC_SPD_CUST
  • From: Marek Behún
• [PATCH 7/7] USB: serial: ftdi_sio: Fill c_*speed fields with real baudrate
  • From: Marek Behún
• [PATCH 2/7] USB: serial: ftdi_sio: Add missing baudrate validation
  • From: Marek Behún
• [PATCH 0/7] ftdi_sio driver improvements
  • From: Marek Behún
• [PATCH 3/7] USB: serial: ftdi_sio: Extract SIO divisor code to function
  • From: Marek Behún
• [PATCH 4/7] USB: serial: ftdi_sio: Do not reset baudrate to 9600 on error
  • From: Marek Behún
• [PATCH 1/7] USB: serial: ftdi_sio: Fix divisor overflow
  • From: Marek Behún
• [PATCH 5/7] USB: serial: ftdi_sio: Fix baudrate rounding for ASYNC_SPD_CUST
  • From: Marek Behún
• Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0
  • From: Guenter Roeck
• [PATCH v2 1/4] tty: n_gsm: fix wrong T1 retry count handling
  • From: D. Starke
• [PATCH v2 3/4] tty: n_gsm: fix flow control handling in tx path
  • From: D. Starke
• [PATCH v2 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll()
  • From: D. Starke
• [PATCH v2 2/4] tty: n_gsm: fix DM command
  • From: D. Starke
• Re: [PATCH 0/3] serial: Fix support for UPF_SPD_* flags
  • From: Pali Rohár
• Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single()
  • From: Geert Uytterhoeven
• Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0
  • From: Chen, Rong A
• [PATCH 2/2] tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
  • From: Jiri Slaby
• [PATCH 1/2] tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
  • From: Jiri Slaby
• Re: [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0
  • From: Greg KH
• Re: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll()
  • From: Jiri Slaby
• RE: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll()
  • From: Starke, Daniel
• [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: William Zhang
• [linux-next:master] BUILD REGRESSION 088b9c375534d905a4d337c78db3b3bfbb52c4a0
  • From: kernel test robot
• Re: [PATCH 4/4] tty: n_gsm: fix missing corner cases in gsmld_poll()
  • From: Jiri Slaby
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [PATCH v7 12/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon
• [PATCH v7 05/16] dt-bindings: reset: npcm: add GCR syscon property
  • From: Tomer Maimon
• [PATCH v7 06/16] ARM: dts: nuvoton: add reset syscon property
  • From: Tomer Maimon
• [PATCH v7 09/16] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon
• [PATCH v7 11/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v7 14/16] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon
• [PATCH v7 13/16] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v7 03/16] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• [PATCH v7 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH v7 07/16] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• [PATCH v7 15/16] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon
• [PATCH v7 10/16] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon
• [PATCH v7 08/16] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• [PATCH v7 16/16] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon
• [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v7 02/16] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v7 01/16] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Vinod Koul
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Vladimir Oltean
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Damien Le Moal
• [PATCH -next v2] serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  • From: Guo Mengqi
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Tejun Heo
• Re: [PATCH v2 5/9] dt_bindings: rs485: Correct delay values
  • From: Rob Herring
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Imran Khan
• [PATCH] Revert "kernfs: Change kernfs_notify_list to llist."
  • From: Imran Khan
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Wolfram Sang
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Tejun Heo
• [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: William Zhang
• [PATCH 0/9] arm: bcmbca: Move BCM63138 SoC support under ARCH_BCMBCA
  • From: William Zhang
• Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Serge Semin
• RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Biju Das
• Re: [PATCH 1/2] serial: Embed rs485_supported to uart_port
  • From: Lino Sanfilippo
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König
• Re: [PATCH 2/2] serial: RS485 termination is supported if DT provides one
  • From: Lino Sanfilippo
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Jean Delvare
• Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Andy Shevchenko
• RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Biju Das
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp)
• Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Florian Fainelli
• Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported
  • From: Lino Sanfilippo
• [PATCH tty-next] MIPS: ath79: Remove one of the identical args in early_printk
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported
  • From: Ilpo Järvinen
• Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support
  • From: Ilpo Järvinen
• Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Ilpo Järvinen
• [PATCH 2/2] serial: RS485 termination is supported if DT provides one
  • From: Ilpo Järvinen
• [PATCH 1/2] serial: Embed rs485_supported to uart_port
  • From: Ilpo Järvinen
• [PATCH 0/2] serial: RS485 termination improvements
  • From: Ilpo Järvinen
• Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support
  • From: Lino Sanfilippo
• Re: [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree
  • From: Lino Sanfilippo
• Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported
  • From: Lino Sanfilippo
• [PATCH v2] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Uwe Kleine-König
• Re: [PATCH] serial: 8250_fsl: Don't report FE, PE and OE twice
  • From: Ilpo Järvinen
• RE: Questions about usb to serial driver
  • From: Neal Liu
• RE: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Chanho Park
• Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Jiri Slaby
• RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Biju Das
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Jiri Slaby
• Re: [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param
  • From: Jiri Slaby
• Re: [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param
  • From: Jiri Slaby
• Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Jiri Slaby
• Re: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Jiri Slaby
• Re: [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support
  • From: Andy Shevchenko
• Re: [PATCH v2 5/9] dt_bindings: rs485: Correct delay values
  • From: Andy Shevchenko
• Re: [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree
  • From: Andy Shevchenko
• Re: [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Andy Shevchenko
• Re: [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported
  • From: Andy Shevchenko
• [PATCH v2 8/9] serial: ar933x: Remove redundant assignment in rs485_config
  • From: Lino Sanfilippo
• [PATCH v2 3/9] serial: core: move sanitizing of RS485 delays into own function
  • From: Lino Sanfilippo
• [PATCH v2 4/9] serial: core: sanitize RS485 delays read from device tree
  • From: Lino Sanfilippo
• [PATCH v2 7/9] serial: ar933x: Fix check for RS485 support
  • From: Lino Sanfilippo
• [PATCH v2 6/9] serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• [PATCH v2 9/9] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  • From: Lino Sanfilippo
• [PATCH v2 2/9] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• [PATCH v2 5/9] dt_bindings: rs485: Correct delay values
  • From: Lino Sanfilippo
• [PATCH v2 0/9] Fixes and cleanup for RS485
  • From: Lino Sanfilippo
• [PATCH v2 1/9] serial: core: only get RS485 termination GPIO if supported
  • From: Lino Sanfilippo
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Imran Khan
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lino Sanfilippo
• [tty:tty-testing] BUILD SUCCESS 7349660438603ed19282e75949561406531785a5
  • From: kernel test robot
• Re: [linux-next:master] BUILD REGRESSION 6cc11d2a1759275b856e464265823d94aabd5eaf
  • From: Roman Gushchin
• Re: [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Tejun Heo
• [RESEND PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Imran Khan
• Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Nathan Chancellor
• Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Greg KH
• Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Imran Khan
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Nathan Chancellor
• [PATCH] kernfs: Avoid re-adding kernfs_node into kernfs_notify_list.
  • From: Imran Khan
• [PATCH v5 1/2] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: D. Starke
• [PATCH v5 2/2] tty: n_gsm: fix resource allocation order in gsm_activate_mux()
  • From: D. Starke
• RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Greg Kroah-Hartman
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 2/2] serial: Set probe_no_timeout for all DT based drivers
  • From: Andy Shevchenko
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Greg Kroah-Hartman
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• Re: Questions about usb to serial driver
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• RE: Questions about usb to serial driver
  • From: Neal Liu
• Re: [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Greg Kroah-Hartman
• [PATCH V2 24/30] serial: qcom: Migrate to dev_pm_opp_set_config()
  • From: Viresh Kumar
• [PATCH V2 00/30] OPP: Add new configuration interface: dev_pm_opp_set_config()
  • From: Viresh Kumar
• Re: [PATCH v4 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: Greg KH
• Re: Questions about usb to serial driver
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH v4 7/9] tty: n_gsm: fix packet re-transmission without open control channel
  • From: D. Starke
• [PATCH v4 3/9] tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()
  • From: D. Starke
• [PATCH v4 4/9] tty: n_gsm: fix missing timer to handle stalled links
  • From: D. Starke
• [PATCH v4 1/9] tty: n_gsm: fix user open not possible at responder until initiator open
  • From: D. Starke
• [PATCH v4 9/9] tty: n_gsm: fix race condition in gsmld_write()
  • From: D. Starke
• [PATCH v4 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: D. Starke
• [PATCH v4 2/9] tty: n_gsm: fix tty registration before control channel open
  • From: D. Starke
• [PATCH v4 5/9] tty: n_gsm: fix non flow control frames during mux flow off
  • From: D. Starke
• [PATCH v4 8/9] tty: n_gsm: fix resource allocation order in gsm_activate_mux()
  • From: D. Starke
• Re: Regression for duplicate (?) console parameters on next-20220630
  • From: Imran Khan
• Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single()
  • From: Yang Yingliang
• [tty:tty-testing] BUILD SUCCESS c8177f90b7c618042e8dd19c87307cf29a7dc275
  • From: kernel test robot
• [tty:tty-linus] BUILD SUCCESS b941e487152e0909ef43faacae6eeee266d9b378
  • From: kernel test robot
• Questions about usb to serial driver
  • From: Neal Liu
• Re: [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single()
  • From: Yang Yingliang
• [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set
  • From: Saravana Kannan
• [PATCH v2 2/2] serial: Set probe_no_timeout for all DT based drivers
  • From: Saravana Kannan
• [PATCH v2 1/2] driver core: Add probe_no_timeout flag for drivers
  • From: Saravana Kannan
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: Regression for duplicate (?) console parameters on next-20220630
  • From: Michael Walle
• Re: Regression for duplicate (?) console parameters on next-20220630
  • From: Nathan Chancellor
• RE: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• Re: [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single()
  • From: Greg KH
• Re: [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single()
  • From: Greg KH
• Re: [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically
  • From: Greg Kroah-Hartman
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Greg KH
• Re: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: Greg KH
• Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data
  • From: Philipp Zabel
• [PATCH 2/2] serial: sh-sci: fix missing uart_unregister_driver() in sci_probe_single()
  • From: Yang Yingliang
• [PATCH 1/2] serial: sh-sci: fix missing sci_cleanup_single() in sci_probe_single()
  • From: Yang Yingliang
• Regression for duplicate (?) console parameters on next-20220630
  • From: Michael Walle
• Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• Re: [PATCH v6 08/17] reset: npcm: using syscon instead of device data
  • From: Philipp Zabel
• [PATCH v6 01/17] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v6 14/17] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v6 16/17] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon
• [PATCH v6 10/17] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon
• [PATCH v6 17/17] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon
• [PATCH v6 00/17] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v6 11/17] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon
• [PATCH v6 08/17] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• [PATCH v6 02/17] dt-bindings: serial: 8250: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v6 13/17] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon
• [PATCH v6 04/17] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• [PATCH v6 07/17] ARM: dts: nuvoton: add reset syscon property
  • From: Tomer Maimon
• [PATCH v6 05/17] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH v6 06/17] dt-bindings: reset: npcm: add GCR syscon property
  • From: Tomer Maimon
• [PATCH v6 09/17] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• [PATCH v6 12/17] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v6 03/17] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v6 15/17] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon
• Re: [PATCH 1/1] 8250_dwlib: Convert bitops to newer form
  • From: Ilpo Järvinen
• Re: [PATCH 1/1] 8250_dwlib: Convert bitops to newer form
  • From: Andy Shevchenko
• [PATCH v3 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Andy Shevchenko
• [PATCH 1/1] 8250_dwlib: Convert bitops to newer form
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically
  • From: Ilpo Järvinen
• [PATCH v1 1/1] serial: 8250_dw: Sort headers alphabetically
  • From: Andy Shevchenko
• Re: [PATCH v2 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Ilpo Järvinen
• RE: [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Phil Edworthy
• [PATCH v2 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Ilpo Järvinen
• Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Paul Cercueil
• [PATCH] serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  • From: Biju Das
• Re: [PATCH] serial: mvebu-uart: correctly report configured baudrate value
  • From: Pali Rohár
• Re: [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Pali Rohár
• Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Ilpo Järvinen
• Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config
  • From: Lino Sanfilippo
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Lino Sanfilippo
• Re: [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Luca Ceresoli
• Re: [PATCH] serial: Revert RS485 polarity change on UART open
  • From: Lukas Wunner
• Re: [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Greg Kroah-Hartman
• [PATCH v2] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Florian Fainelli
• Re: [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata"
  • From: Jeremy Linton
• Re: [PATCH 0/2] BUG, more dw8259 ACPI crashes
  • From: Jeremy Linton
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Maximilian Luz
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König
• Re: [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Michael Ellerman
• Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Hector Martin
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Andy Shevchenko
• RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• RE: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi (Temp) (QUIC)
• [V2] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250: Fix PM usage_count for console handover
  • From: Ilpo Järvinen
• Re: [PATCH] serial: Fix spelling mistake
  • From: Ilpo Järvinen
• [PATCH] serial: Fix spelling mistake
  • From: Zhang Jiaming
• Re: [PATCH] serial: 8250: Fix PM usage_count for console handover
  • From: Tony Lindgren
• Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Ilpo Järvinen
• Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset
  • From: Andy Shevchenko
• Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: Fix PM usage_count for console handover
  • From: Ilpo Järvinen
• Re: [PATCH] serial: 8250: Fix PM usage_count for console handover
  • From: Tony Lindgren
• Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Ilpo Järvinen
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas
• Re: [PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference
  • From: Ilpo Järvinen
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Christophe Leroy
• Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset
  • From: Ilpo Järvinen
• Re: [PATCH 0/2] BUG, more dw8259 ACPI crashes
  • From: Miquel Raynal
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Heikki Krogerus
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas
• Re: [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Krzysztof Kozlowski
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata"
  • From: Greg KH
• Re: [PATCH] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Greg Kroah-Hartman
• [PATCH v2] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Chanho Park
• [PATCH v3] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• RE: [PATCH v2] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• RE: [PATCH v2] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• [PATCH 0/2] BUG, more dw8259 ACPI crashes
  • From: Jeremy Linton
• [PATCH 1/2] Revert "serial: 8250: dw: Move the USR register to pdata"
  • From: Jeremy Linton
• [PATCH 2/2] serial: 8250: dw: Fix NULL pointer dereference
  • From: Jeremy Linton
• [PATCH] serial: 8250_bcm7271: Save/restore RTS in suspend/resume
  • From: Florian Fainelli
• [PATCH v1 1/1] serial: 8250_dw: Drop PM ifdeffery
  • From: Andy Shevchenko
• Re: [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250: Fix PM usage_count for console handover
  • From: Andy Shevchenko
• Re: [PATCH 3/4] serial: 8250_dw: Move 16550 compatible & LCR checks to dw8250_verify_write()
  • From: Andy Shevchenko
• Re: [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Andy Shevchenko
• [PATCH] serial: 8250: Fix PM usage_count for console handover
  • From: Ilpo Järvinen
• Re: [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers
  • From: Saravana Kannan
• Re: [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers
  • From: Tobias Klauser
• Re: [PATCH v2] tty: serial: samsung_tty: loopback mode support
  • From: Greg Kroah-Hartman
• [PATCH 4/4] serial: 8250_dw: Rework ->serial_out() LCR write retry logic
  • From: Ilpo Järvinen
• [PATCH 3/4] serial: 8250_dw: Move 16550 compatible & LCR checks to dw8250_verify_write()
  • From: Ilpo Järvinen
• [PATCH 1/4] serial: 8250_dw: Use dw8250_serial_out() in dw8250_serial_out38x()
  • From: Ilpo Järvinen
• [PATCH 0/4] serial: 8250_dw: Rework ->serial_out() & LCR retry logic
  • From: Ilpo Järvinen
• [PATCH 2/4] serial: 8250_dw: Rename offset to reg_offset
  • From: Ilpo Järvinen
• RE: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Chanho Park
• Re: [PATCH v2] tty: serial: samsung_tty: loopback mode support
  • From: Ilpo Järvinen
• [PATCH v2] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• [PATCH RESEND v2] earlycon: prevent multiple register_console()
  • From: Michael Walle
• Re: [PATCH v2] earlycon: prevent multiple register_console()
  • From: Greg Kroah-Hartman
• RE: [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• Re: [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Andy Shevchenko
• Re: [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Andy Shevchenko
• Re: [PATCH v2] earlycon: prevent multiple register_console()
  • From: Michael Walle
• Re: [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set
  • From: Andy Shevchenko
• Re: [PATCH v9 1/6] serial: 8250: make saved LSR larger
  • From: Andy Shevchenko
• Re: [PATCH RESEND tty-next] serial: 8250_dw: Take port lock while accessing LSR
  • From: Andy Shevchenko
• Re: [PATCH] serial: mvebu-uart: correctly report configured baudrate value
  • From: Ilpo Järvinen
• [PATCH] serial: mvebu-uart: correctly report configured baudrate value
  • From: Pali Rohár
• Re: [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Pali Rohár
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Andy Shevchenko
• Re: [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Pali Rohár
• [PATCH] serial: mvebu: Apply old baudrate to termios
  • From: Ilpo Järvinen
• RE: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: Starke, Daniel
• [PATCH RESEND tty-next] serial: 8250_dw: Take port lock while accessing LSR
  • From: Ilpo Järvinen
• [PATCH v2 -next] serial: 8250: fix return error code in serial8250_request_std_resource()
  • From: Yi Yang
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Ilpo Järvinen
• RE: [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• Re: [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set
  • From: Fabio Estevam
• [tty:tty-linus] BUILD SUCCESS ec5ad331680c96ef3dd30dc297b206988023b9e1
  • From: kernel test robot
• [PATCH v1 2/2] serial: Set probe_no_timeout for all DT based drivers
  • From: Saravana Kannan
• [PATCH v1 1/2] driver core: Add probe_no_timeout flag for drivers
  • From: Saravana Kannan
• [PATCH v1 0/2] Fix console probe delay when stdout-path isn't set
  • From: Saravana Kannan
• [tty:tty-testing] BUILD SUCCESS f287f971e2569827fe9fb3a8d55a37703a13cf29
  • From: kernel test robot
• [PATCH] serial: stm32: Clear prev values before setting RTS delays
  • From: Ilpo Järvinen
• [PATCH v6] tty: fix hang on tty device with no_room set
  • From: juanfengpy
• Re: [PATCH v2 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Tony Lindgren
• Re: [PATCH 2/3] serial: 8250_dw: Take port lock while accessing LSR
  • From: Greg KH
• Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource()
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Greg Kroah-Hartman
• Re: [PATCH -next] serial: 8250: fix return error code in serial8250_request_std_resource()
  • From: Greg KH
• Re: [PATCH -next] drivers/tty/serial: Add missing clk_disable_unprepare()
  • From: Greg KH
• Re: [PATCH v2 1/1] serial: core: Start managing serial controllers to enable runtime PM
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: samsung_tty: set dma burst_size to 1
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Ilpo Järvinen
• Re: [PATCH v5] tty: fix hang on tty device with no_room set
  • From: Greg KH
• Re: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: Greg KH
• Re: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Krzysztof Kozlowski
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Ilpo Järvinen
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Ilpo Järvinen
• Re: [PATCH] serial: Revert RS485 polarity change on UART open
  • From: Matthias Schiffer
• Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config
  • From: Ilpo Järvinen
• [PATCH] tty: serial: samsung_tty: support more than 4 uart ports
  • From: Chanho Park
• [PATCH] tty: serial: samsung_tty: set dma burst_size to 1
  • From: Chanho Park
• Re: [PATCH v3 5/6] serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZE
  • From: Jiri Slaby
• [PATCH] tty: serial: samsung_tty: loopback mode support
  • From: Chanho Park
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• Re: [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree
  • From: Lino Sanfilippo
• Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config
  • From: Lino Sanfilippo
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• Re: [PATCH 22/36] serial: Sanitize rs485_struct
  • From: Lino Sanfilippo
• Re: [PATCH 01/36] serial: Add uart_rs485_config()
  • From: Lino Sanfilippo
• Re: [PATCH 01/36] serial: Add uart_rs485_config()
  • From: Lukas Wunner
• Re: [PATCH 22/36] serial: Sanitize rs485_struct
  • From: Lukas Wunner
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lukas Wunner
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lukas Wunner
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Ilpo Järvinen
• Re: [PATCH 6/8] serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  • From: Ilpo Järvinen
• Re: [PATCH 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  • From: Ilpo Järvinen
• Re: [PATCH 7/8] serial: ar933x: Remove redundant assignment in rs485_config
  • From: Ilpo Järvinen
• Re: [PATCH 4/8] serial: core: sanitize RS485 delays read from device tree
  • From: Ilpo Järvinen
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Ilpo Järvinen
• Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Ilpo Järvinen
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Ilpo Järvinen
• [PATCH v3 0/6] serial: A few cleanups
  • From: Ilpo Järvinen
• [PATCH v3 5/6] serial: Convert SERIAL_XMIT_SIZE to UART_XMIT_SIZE
  • From: Ilpo Järvinen
• [PATCH v3 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA
  • From: Ilpo Järvinen
• [PATCH v3 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Ilpo Järvinen
• [PATCH v3 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline
  • From: Ilpo Järvinen
• [PATCH v3 2/6] serial: msm: Rename UART_* defines to MSM_UART_*
  • From: Ilpo Järvinen
• [PATCH v3 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED
  • From: Ilpo Järvinen
• [PATCH v9 1/6] serial: 8250: make saved LSR larger
  • From: Ilpo Järvinen
• [PATCH v9 0/6] Add RS485 9th bit addressing mode support to DW UART
  • From: Ilpo Järvinen
• [PATCH v9 5/6] serial: Support for RS-485 multipoint addresses
  • From: Ilpo Järvinen
• [PATCH v9 6/6] serial: 8250_dwlib: Support for 9th bit multipoint addressing
  • From: Ilpo Järvinen
• [PATCH v9 3/6] serial: 8250_lpss: Use 32-bit reads
  • From: Ilpo Järvinen
• [PATCH v9 4/6] serial: take termios_rwsem for ->rs485_config() & pass termios as param
  • From: Ilpo Järvinen
• [PATCH v9 2/6] serial: 8250: create lsr_save_mask
  • From: Ilpo Järvinen
• Re: [PATCH v2 5/6] serial: Use UART_XMIT_SIZE
  • From: Ilpo Järvinen
• Re: Sending gnss data during suspend doesn't work
  • From: Mohamed Ali Fodha
• Sending gnss data during suspend doesn't work
  • From: Mohamed Ali Fodha
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Doug Anderson
• Re: [PATCH] tty: serial: qcom-geni-serial: minor fixes to get_clk_div_rate()
  • From: Doug Anderson
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lino Sanfilippo
• Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Lino Sanfilippo
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Lino Sanfilippo
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Andy Shevchenko
• Re: [PATCH 5/8] dt_bindings: rs485: Correct delay values
  • From: Andy Shevchenko
• Re: [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Andy Shevchenko
• [PATCH 1/1] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3588
  • From: Sebastian Reichel
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lino Sanfilippo
• Re: [PATCH v4 06/18] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• Re: [PATCH v5 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support
  • From: Arnd Bergmann
• RE: [PATCH v3 6/9] tty: n_gsm: fix deadlock and link starvation in outgoing data path
  • From: Starke, Daniel
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Andy Shevchenko
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Andy Shevchenko
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Andy Shevchenko
• Re: [PATCH v5 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Jiri Slaby
• Re: [PATCH v4 06/18] clk: npcm8xx: add clock controller
  • From: Christophe JAILLET
• Re: [PATCH v2 6/6] serial: Consolidate BOTH_EMPTY use
  • From: Jiri Slaby
• Re: [PATCH v2 5/6] serial: Use UART_XMIT_SIZE
  • From: Jiri Slaby
• Re: [PATCH v2 4/6] serial: 8250: Use C99 array initializer & define UART_REG_UNMAPPED
  • From: Jiri Slaby
• Re: [PATCH v2 2/6] serial: msm: Rename UART_* defines to MSM_UART_*
  • From: Jiri Slaby
• Re: [PATCH v2 3/6] serial: Use bits for UART_LSR_BRK_ERROR_BITS/MSR_ANY_DELTA
  • From: Jiri Slaby
• Re: [PATCH v2 1/6] serial: msm: Convert container_of UART_TO_MSM to static inline
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Jiri Slaby
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lino Sanfilippo
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Stephen Boyd
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: kernel test robot
• Re: [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Andy Shevchenko
• Re: [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Andy Shevchenko
• [PATCH 2/8] serial: core, 8250: set RS485 termination gpio in serial core
  • From: Lino Sanfilippo
• [PATCH 1/8] serial: core: only get RS485 termination gpio if supported
  • From: Lino Sanfilippo
• [PATCH 3/8] serial: core: move sanitizing of RS485 delays into own function
  • From: Lino Sanfilippo