There is one more place where lqasc_tx_ready() can be used now:
lqasc_console_putchar(). So replace the open-coded variant by the
helper.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/tty/serial/lantiq.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 6da1b7496c6c..ba9739af30ed 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -606,15 +606,12 @@ static const struct uart_ops lqasc_pops = {
static void
lqasc_console_putchar(struct uart_port *port, unsigned char ch)
{
- int fifofree;
-
if (!port->membase)
return;
- do {
- fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT)
- & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF;
- } while (fifofree == 0);
+ while (!lqasc_tx_ready(port))
+ ;
+
writeb(ch, port->membase + LTQ_ASC_TBUF);
}
--
2.37.3
