Linux Serial

• Thread Index

• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: matthew . gerlach
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: Geert Uytterhoeven
• Re: [PATCH v1 5/5] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: Andy Shevchenko
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: matthew . gerlach
• Re: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 13/13] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  • From: Sergiu.Moga
• Re: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• Re: [PATCH v2 06/13] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9x60
  • From: Sergiu.Moga
• Re: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• Re: [PATCH v2 13/13] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 07/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 06/13] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9x60
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 03/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding
  • From: Krzysztof Kozlowski
• Re: [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
  • From: Krzysztof Kozlowski
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: Andy Shevchenko
• [tty:tty-linus] BUILD SUCCESS 1d10cd4da593bc0196a239dcc54dac24b6b0a74e
  • From: kernel test robot
• Re:Re: [PATCH] tty: serial: atmel: fix spelling typo in comment
  • From: Yi Jiangshan
• Re: [PATCH] tty: serial: qcom-geni-serial: Replace hardcoded icc flags with macros.
  • From: Stephen Boyd
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: matthew . gerlach
• Re: [PATCH v1 2/5] fpga: dfl: Move the DFH definitions
  • From: matthew . gerlach
• Re: [PATCH v1 1/5] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH] tty: serial: qcom-geni-serial: Replace hardcoded icc flags with macros.
  • From: Vijaya Krishna Nivarthi
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Arnd Bergmann
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Russell King (Oracle)
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Arnd Bergmann
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Ilpo Järvinen
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: atmel: fix spelling typo in comment
  • From: Greg KH
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Ilpo Järvinen
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Ilpo Järvinen
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Arnd Bergmann
• Re: [PATCH v2 12/13] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Ilpo Järvinen
• Re: [PATCH v2 12/13] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Sergiu.Moga
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Ilpo Järvinen
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Ilpo Järvinen
• Re: [PATCH v2 08/13] tty: serial: atmel: Define GCLK as USART baudrate source clock
  • From: Sergiu.Moga
• Re: [PATCH v2 12/13] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Ilpo Järvinen
• Re: [PATCH v2 10/13] tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  • From: Sergiu.Moga
• Re: [PATCH v2 09/13] tty: serial: atmel: Define BRSRCCK bitmask of UART IP's Mode Register
  • From: Ilpo Järvinen
• Re: [PATCH v2 10/13] tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  • From: Ilpo Järvinen
• Re: [PATCH v2 08/13] tty: serial: atmel: Define GCLK as USART baudrate source clock
  • From: Ilpo Järvinen
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: Arnd Bergmann
• Re: [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
  • From: Sergiu.Moga
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: atmel: fix spelling typo in comment
  • From: Claudiu.Beznea
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: Thomas Zimmermann
• Re: [PATCH v1 2/5] fpga: dfl: Move the DFH definitions
  • From: Greg KH
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: Daniel Vetter
• Re: [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
  • From: Rob Herring
• Re: [PATCH v1 5/5] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: Andy Shevchenko
• Re: [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: Andy Shevchenko
• Re: [PATCH v1 1/5] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: Andy Shevchenko
• Re: [PATCH v1 2/5] fpga: dfl: Move the DFH definitions
  • From: Andy Shevchenko
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Daniel Vetter
• [PATCH v1 3/5] fpga: dfl: Add DFHv1 Register Definitions
  • From: matthew . gerlach
• [PATCH v1 1/5] Documentation: fpga: dfl: Add documentation for DFHv1
  • From: matthew . gerlach
• [PATCH v1 5/5] tty: serial: 8250: add DFL bus driver for Altera 16550.
  • From: matthew . gerlach
• [PATCH v1 4/5] fpga: dfl: add generic support for MSIX interrupts
  • From: matthew . gerlach
• [PATCH v1 2/5] fpga: dfl: Move the DFH definitions
  • From: matthew . gerlach
• [PATCH v1 0/5] Enhance definition of DFH and use enhancements for uart driver
  • From: matthew . gerlach
• Re: [PATCH v2 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Ard Biesheuvel
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Lee Jones
• Re: [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
  • From: Mark Brown
• [PATCH v2 06/13] dt-bindings: serial: atmel,at91-usart: Add SAM9260 compatibles to SAM9x60
  • From: Sergiu Moga
• [PATCH v2 13/13] dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  • From: Sergiu Moga
• [PATCH v2 07/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding
  • From: Sergiu Moga
• [PATCH v2 12/13] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Sergiu Moga
• [PATCH v2 10/13] tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  • From: Sergiu Moga
• [PATCH v2 09/13] tty: serial: atmel: Define BRSRCCK bitmask of UART IP's Mode Register
  • From: Sergiu Moga
• [PATCH v2 11/13] clk: at91: sama5d2: Add Generic Clocks for UART/USART
  • From: Sergiu Moga
• [PATCH v2 01/13] spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
  • From: Sergiu Moga
• [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema
  • From: Sergiu Moga
• [PATCH v2 00/13] Make atmel serial driver aware of GCLK
  • From: Sergiu Moga
• [PATCH v2 02/13] ARM: dts: at91: sama7g5: Swap rx and tx for spi11
  • From: Sergiu Moga
• [PATCH v2 03/13] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding
  • From: Sergiu Moga
• [PATCH v2 04/13] ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
  • From: Sergiu Moga
• [PATCH v2 08/13] tty: serial: atmel: Define GCLK as USART baudrate source clock
  • From: Sergiu Moga
• Re: [PATCH v3 0/4] tty: TX helpers
  • From: Johan Hovold
• Re: [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
  • From: Jiri Slaby
• [PATCH v3 0/4] tty: TX helpers
  • From: Jiri Slaby
• [PATCH v3 4/4] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
  • From: Jiri Slaby
• [PATCH v3 2/4] tty: serial: introduce transmit helper generators
  • From: Jiri Slaby
• [PATCH v3 3/4] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
  • From: Jiri Slaby
• [PATCH v3 1/4] tty: serial: move and cleanup vt8500_tx_empty()
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: atmel: fix spelling typo in comment
  • From: Richard Genoud
• [PATCH] tty: serial: atmel: fix spelling typo in comment
  • From: Jiangshan Yi
• [tty:tty-testing] BUILD SUCCESS 35f2e3c267f07a42bc1bf08081e963b3a33e6d7c
  • From: kernel test robot
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Lee Jones
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel.Thiagarajan
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH v3] drivers/tty/serial: check the return value of uart_port_check()
  • From: Ilpo Järvinen
• [PATCH] tty: serial: Fix comments typo
  • From: Shaomin Deng
• Re: [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: Greg KH
• Re: [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: tuo cao
• Re: [PATCH v3] drivers/tty/serial: check the return value of uart_port_check()
  • From: Greg KH
• [PATCH v3] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [GIT PULL] TTY/Serial driver fixes for 6.0-rc4
  • From: pr-tracker-bot
• [tty:tty-testing] BUILD SUCCESS e4cdd25cafac3f61c74c146db5de7a5c9bd7b6d0
  • From: kernel test robot
• [GIT PULL] TTY/Serial driver fixes for 6.0-rc4
  • From: Greg KH
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Andy Shevchenko
• Re: [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
  • From: Ilpo Järvinen
• Re: [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
  • From: Ilpo Järvinen
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel.Thiagarajan
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Jiri Slaby
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Jiri Slaby
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Greg KH
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Jiri Slaby
• RE: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: Kumaravel.Thiagarajan
• [PATCH v2 RESEND 1/3] serial: Create uart_xmit_advance()
  • From: Ilpo Järvinen
• [PATCH v2 RESEND 3/3] serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH v2 RESEND 2/3] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH v2 RESEND 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• Re: [PATCH v2 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Greg Kroah-Hartman
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel.Thiagarajan
• Re: [PATCH v2 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel.Thiagarajan
• Re: [PATCH v2 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Greg Kroah-Hartman
• RE: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: Kumaravel.Thiagarajan
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Ilpo Järvinen
• RE: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel.Thiagarajan
• Re: [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Greg KH
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Eugen.Hristev
• [PATCH v2 2/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER()
  • From: Jiri Slaby
• [PATCH v2 0/3] tty: TX helpers
  • From: Jiri Slaby
• [PATCH v2 1/3] tty: serial: introduce transmit helper generators
  • From: Jiri Slaby
• [PATCH v2 3/3] tty: serial: use DEFINE_UART_PORT_TX_HELPER_LIMITED()
  • From: Jiri Slaby
• Re: [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Claudiu.Beznea
• [PATCH] serial: Fix double word
  • From: Shaomin Deng
• Re: [PATCH 4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART
  • From: Claudiu.Beznea
• Re: [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Sergiu.Moga
• Re: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: Ilpo Järvinen
• Re: [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Claudiu.Beznea
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Ilpo Järvinen
• Re: [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Sergiu.Moga
• [PATCH v3 3/6] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
  • From: D. Starke
• [PATCH v3 2/6] tty: n_gsm: name gsm tty device minors
  • From: D. Starke
• [PATCH v3 5/6] tty: n_gsm: name the debug bits
  • From: D. Starke
• [PATCH v3 6/6] tty: n_gsm: add debug bit for user payload
  • From: D. Starke
• [PATCH v3 1/6] tty: n_gsm: add enumeration for gsm encodings
  • From: D. Starke
• [PATCH v3 4/6] tty: n_gsm: introduce gsm_control_command() function
  • From: D. Starke
• [tty:tty-linus] BUILD SUCCESS 902e02ea9385373ce4b142576eef41c642703955
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS cac8f7194111bc841b609fee5f1b20dad8f86ded
  • From: kernel test robot
• Re: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: kernel test robot
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: kernel test robot
• Re: [PATCH 4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART
  • From: Stephen Boyd
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: kernel test robot
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Geert Uytterhoeven
• Re: [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: Andy Shevchenko
• Re: [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Andy Shevchenko
• [PATCH v1 tty-next 1/2] 8250: microchip: pci1xxxx: Add driver for the quad-uart function in the multi-function endpoint of pci1xxxx device.
  • From: Kumaravel Thiagarajan
• [PATCH v1 tty-next 0/2] 8250: microchip: pci1xxxx: Add driver for the pci1xxxx's quad-uart function.
  • From: Kumaravel Thiagarajan
• [PATCH v1 tty-next 2/2] 8250: microchip: pci1xxxx: Add power management functions to pci1xxxx's quad-uart driver.
  • From: Kumaravel Thiagarajan
• Re: [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Richard Genoud
• Re: [PATCH v2 1/5] serial: ucc_uart: Remove custom frame size calculation
  • From: Timur Tabi
• [PATCH v1 1/1] serial: 8250_men_mcb: Remove duplicate UAPI:serial_core inclusion
  • From: Andy Shevchenko
• Re: [PATCH v2 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• [PATCH v2 3/3] serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH v2 2/3] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH v2 1/3] serial: Create uart_xmit_advance()
  • From: Ilpo Järvinen
• [PATCH v2 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• Re: [PATCH 1/3] serial: Create uart_xmit_advance()
  • From: Andy Shevchenko
• Re: [PATCH 1/3] serial: Create uart_xmit_advance()
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/3] serial: Create uart_xmit_advance()
  • From: Andy Shevchenko
• Re: [PATCH 1/3] serial: Create uart_xmit_advance()
  • From: Greg Kroah-Hartman
• Re: [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: Greg KH
• Re: [PATCH] serial: icom: Fix some indentation
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/4] serial: Rename vars in uart_get_rs485_config()
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/4] serial: Rename vars in uart_get_rs485_config()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Greg Kroah-Hartman
• [PATCH v2 5/5] serial: tegra: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH v2 4/5] serial: sunsab: Remove frame size calculation dead-code
  • From: Ilpo Järvinen
• [PATCH v2 3/5] serial: fsl_lpuart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH v2 2/5] serial: cpm_uart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH v2 1/5] serial: ucc_uart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Greg Kroah-Hartman
• [PATCH v2 0/5] serial: Remove custom frame size calculation
  • From: Ilpo Järvinen
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• Re: [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Jiri Slaby
• [PATCH v2 4/4] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• [PATCH v2 3/4] serial: Convert serial_rs485 to kernel doc
  • From: Ilpo Järvinen
• [PATCH v2 2/4] serial: add helpers to copy serial_rs485 from/to userspace
  • From: Ilpo Järvinen
• [PATCH v2 1/4] serial: Rename vars in uart_get_rs485_config()
  • From: Ilpo Järvinen
• [PATCH v2 0/4] serial: Create kserial_rs485 to get rid of padding
  • From: Ilpo Järvinen
• Re: [PATCH] tty: move from strlcpy with unused retval to strscpy
  • From: Jiri Slaby
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Ilpo Järvinen
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH v2 5/6] tty: n_gsm: name the debug bits
  • From: Jiri Slaby
• Re: [PATCH v2 4/6] tty: n_gsm: introduce gsm_control_command() function
  • From: Jiri Slaby
• Re: [PATCH v2 3/6] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
  • From: Jiri Slaby
• Re: [PATCH v2 2/6] tty: n_gsm: name gsm tty device minors
  • From: Jiri Slaby
• Re: [PATCH v2 1/6] tty: n_gsm: add enumeration for gsm encodings
  • From: Jiri Slaby
• Re: [PATCH 3/3] serial: pch_uart: CIRC_CNT_TO_END() is enough
  • From: Jiri Slaby
• Re: [PATCH 2/3] serial: sh-sci: tail is already on valid range
  • From: Jiri Slaby
• Re: [PATCH 1/3] serial: sh-sci: CIRC_CNT_TO_END() is enough
  • From: Jiri Slaby
• Re: [PATCH] dt-bindings: serial: samsung_uart: drop ref from reg-io-width
  • From: Rob Herring
• Re: [PATCH 3/3] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Andy Shevchenko
• Re: [PATCH 3/3] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• Re: [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper
  • From: Pali Rohár
• Re: [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• Re: [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: meson: Use devm_clk_get_enabled() helper
  • From: Neil Armstrong
• Re: [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• Re: [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper
  • From: Jiri Slaby
• Re: [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Jiri Slaby
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Ilpo Järvinen
• Re: [PATCH v3] drivers/tty/serial: check the return value of uart_port_check()
  • From: Greg KH
• [PATCH v3] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: tuo cao
• Re: [PATCH v4 1/2] dt-bindings: serial: pl011: Add a reg-io-width parameter
  • From: Krzysztof Kozlowski
• Re: [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Andy Shevchenko
• Re: [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Andy Shevchenko
• Re: [PATCH 0/5] serial: Remove custom frame size calculation
  • From: Andy Shevchenko
• Re: [PATCH 3/5] serial: fsl_lpuart: Remove custom frame size calculation
  • From: Andy Shevchenko
• Re: [PATCH 2/5] serial: cpm_uart: Remove custom frame size calculation
  • From: Andy Shevchenko
• Re: [PATCH 3/3] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Andy Shevchenko
• Re: [PATCH 2/3] serial: add helpers to copy serial_rs485 from/to userspace
  • From: Andy Shevchenko
• Re: [PATCH 1/3] serial: Rename vars in uart_get_rs485_config()
  • From: Andy Shevchenko
• Re: [PATCH v4 2/2] serial: pl011: Add reg-io-width parameters
  • From: Ilpo Järvinen
• [PATCH 3/3] serial: Add kserial_rs485 to avoid wasted space due to .padding
  • From: Ilpo Järvinen
• [PATCH 0/3] serial: Create kserial_rs485 to get rid of padding
  • From: Ilpo Järvinen
• [PATCH 2/3] serial: add helpers to copy serial_rs485 from/to userspace
  • From: Ilpo Järvinen
• [PATCH 1/3] serial: Rename vars in uart_get_rs485_config()
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/2] serial: dz: xmit buffer is UART_XMIT_SIZE'd
  • From: Ilpo Järvinen
• Re: [PATCH v2 1/2] serial: dz: xmit buffer is UART_XMIT_SIZE'd
  • From: Maciej W. Rozycki
• [PATCH v4 2/2] serial: pl011: Add reg-io-width parameters
  • From: Shubhrajyoti Datta
• [PATCH v4 1/2] dt-bindings: serial: pl011: Add a reg-io-width parameter
  • From: Shubhrajyoti Datta
• [PATCH v4 0/2] serial: pl011: Add xilinx uart
  • From: Shubhrajyoti Datta
• [PATCH v2] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH v1] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH v1] drivers/tty/serial: check the return value of uart_port_check()
  • From: Li Zhong
• Re: [PATCH 4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART
  • From: Claudiu.Beznea
• Re: [PATCH 1/1] serial: dz: Replace DZ_XMIT_SIZE with UART_XMIT_SIZE
  • From: Maciej W. Rozycki
• [PATCH v2 0/2] serial: dz: UART_XMIT_SIZE/WAKEUP_CHARS cleanups
  • From: Ilpo Järvinen
• [PATCH v2 2/2] serial: dz: Remove custom DZ_WAKEUP_CHARS
  • From: Ilpo Järvinen
• [PATCH v2 1/2] serial: dz: xmit buffer is UART_XMIT_SIZE'd
  • From: Ilpo Järvinen
• Re: [PATCH 1/1] serial: dz: Replace DZ_XMIT_SIZE with UART_XMIT_SIZE
  • From: Ilpo Järvinen
• Re: [PATCH 1/1] serial: dz: Replace DZ_XMIT_SIZE with UART_XMIT_SIZE
  • From: Maciej W. Rozycki
• [PATCH 1/1] serial: dz: Replace DZ_XMIT_SIZE with UART_XMIT_SIZE
  • From: Ilpo Järvinen
• [PATCH 0/3] serial: Add uart_xmit_advance() + fixes part (of a larger patch series)
  • From: Ilpo Järvinen
• [PATCH 2/3] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH 1/3] serial: Create uart_xmit_advance()
  • From: Ilpo Järvinen
• [PATCH 3/3] serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
  • From: Ilpo Järvinen
• [PATCH 4/5] serial: sunsab: Remove frame size calculation dead-code
  • From: Ilpo Järvinen
• [PATCH 5/5] serial: tegra: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH 3/5] serial: fsl_lpuart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH 0/5] serial: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH 2/5] serial: cpm_uart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• [PATCH 1/5] serial: ucc_uart: Remove custom frame size calculation
  • From: Ilpo Järvinen
• Re: [PATCH] dt-bindings: serial: samsung: Add 'power-domains' property
  • From: Krzysztof Kozlowski
• [PATCH v2] tty: serial: atmel: Preserve previous USART mode if RS485 disabled
  • From: Sergiu Moga
• Re: [PATCH] tty: serial: atmel: Preserve previous USART mode if RS485 disabled
  • From: Sergiu.Moga
• Re: [PATCH] tty: serial: atmel: Preserve previous USART mode if RS485 disabled
  • From: Ilpo Järvinen
• [PATCH] tty: serial: atmel: Preserve previous USART mode if RS485 disabled
  • From: Sergiu Moga
• Re: [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Maciej W. Rozycki
• [PATCH] tty: serial: meson: Use devm_clk_get_enabled() helper
  • From: Christophe JAILLET
• Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set
  • From: Saravana Kannan
• [PATCH] dt-bindings: serial: samsung: Add 'power-domains' property
  • From: Rob Herring
• [PATCH 1/3] serial: sh-sci: CIRC_CNT_TO_END() is enough
  • From: Ilpo Järvinen
• [PATCH 3/3] serial: pch_uart: CIRC_CNT_TO_END() is enough
  • From: Ilpo Järvinen
• [PATCH 2/3] serial: sh-sci: tail is already on valid range
  • From: Ilpo Järvinen
• Re: [PATCH v2 0/2] Fix console probe delay when stdout-path isn't set
  • From: Greg Kroah-Hartman
• RE: [PATCH v3 1/2] dt-bindings: serial: pl011: Add a reg-io-width parameter
  • From: Datta, Shubhrajyoti
• [PATCH] dt-bindings: serial: samsung_uart: drop ref from reg-io-width
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial/jsm: fix repeated words in comments
  • From: Bagas Sanjaya
• Re: [PATCH v3 1/2] dt-bindings: serial: pl011: Add a reg-io-width parameter
  • From: Krzysztof Kozlowski
• Re: [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Ilpo Järvinen
• [PATCH v2 6/6] tty: n_gsm: add debug bit for user payload
  • From: D. Starke
• [PATCH v2 4/6] tty: n_gsm: introduce gsm_control_command() function
  • From: D. Starke
• [PATCH v2 3/6] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
  • From: D. Starke
• [PATCH v2 1/6] tty: n_gsm: add enumeration for gsm encodings
  • From: D. Starke
• [PATCH v2 5/6] tty: n_gsm: name the debug bits
  • From: D. Starke
• [PATCH v2 2/6] tty: n_gsm: name gsm tty device minors
  • From: D. Starke
• Re: [PATCH v1] drivers/tty/serial: check the return value of uart_port_check()
  • From: Greg KH
• Re: [PATCH v1] drivers/tty/serial: check the return value of uart_port_check()
  • From: Greg KH
• [PATCH v1] drivers/tty/serial: check the return value of uart_port_check()
  • From: lily
• Re: [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: Greg KH
• [RESEND] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in interrupt handler
  • From: Tuo Cao
• Re: [PATCH 3/6] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
  • From: kernel test robot
• [PATCH v3 2/2] serial: pl011: Add reg-io-width parameters
  • From: Shubhrajyoti Datta
• [PATCH v3 1/2] dt-bindings: serial: pl011: Add a reg-io-width parameter
  • From: Shubhrajyoti Datta
• [PATCH v3 0/2] serial: pl011: Add xilinx uart
  • From: Shubhrajyoti Datta
• Re: [PATCH] serial/jsm: fix repeated words in comments
  • From: Greg KH
• Re: [PATCH] tty/seria: fix repeated words in comments
  • From: Greg KH
• Re: [PATCH] tty/serial: fix repeated words in comments
  • From: Greg KH
• [PATCH] serial/jsm: fix repeated words in comments
  • From: Jilin Yuan
• [PATCH] serial/8250: fix repeated words in comments
  • From: Jilin Yuan
• [PATCH] tty/serial: fix repeated words in comments
  • From: Jilin Yuan
• [PATCH] tty/seria: fix repeated words in comments
  • From: Jilin Yuan
• [PATCH 6/6] tty: n_gsm: add debug bit for user payload
  • From: D. Starke
• [PATCH 5/6] tty: n_gsm: name the debug bits
  • From: D. Starke
• [PATCH 4/6] tty: n_gsm: introduce gsm_control_command() function
  • From: D. Starke
• [PATCH 2/6] tty: n_gsm: name gsm tty device minors
  • From: D. Starke
• [PATCH 3/6] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
  • From: D. Starke
• [PATCH 1/6] tty: n_gsm: add enumeration for gsm encodings
  • From: D. Starke
• [PATCH V3] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Sherry Sun
• Re: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Greg KH
• RE: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Sherry Sun
• Re: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Greg KH
• Re: [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Maciej W. Rozycki
• Re: [PATCH 3/8] serial: dz: Assume previous baudrate is valid
  • From: Maciej W. Rozycki
• Re: [PATCH] serial: 8250: Clear dma tx_err unconditionally
  • From: Andy Shevchenko
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• [PATCH] serial: 8250: Clear dma tx_err unconditionally
  • From: Ilpo Järvinen
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Sergiu.Moga
• [tty:tty-linus] BUILD SUCCESS b5a5b9d5f28d23b84f06b45c61dcad95b07d41bc
  • From: kernel test robot
• [PATCH] tty: move from strlcpy with unused retval to strscpy
  • From: Wolfram Sang
• Re: [PATCH] MAINTAINERS: Update email of Neil Armstrong
  • From: Rob Herring
• Re: [PATCH] dt-bindings: serial: renesas,scif: Document RZ/Five SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Ilpo Järvinen
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/5] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding
  • From: Krzysztof Kozlowski
• Re: [PATCH 1/1] serial: 8250: Add helper for clearing IER
  • From: Andy Shevchenko
• Re: [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Andy Shevchenko
• [PATCH 2/5] dt-bindings: mfd: atmel,at91-usart: convert to json-schema
  • From: Sergiu Moga
• [PATCH 5/5] tty: serial: atmel: Make the driver aware of the existence of GCLK
  • From: Sergiu Moga
• [PATCH 1/5] dt-bindings: mfd: atmel,sama5d2-flexcom: Add SPI child node ref binding
  • From: Sergiu Moga
• [PATCH 0/5] Make atmel serial driver aware of GCLK
  • From: Sergiu Moga
• [PATCH 4/5] clk: at91: sama5d2: Add Generic Clocks for UART/USART
  • From: Sergiu Moga
• [PATCH 3/5] dt-bindings: mfd: atmel,sama5d2-flexcom: Add USART child node ref binding
  • From: Sergiu Moga
• [PATCH 1/1] serial: 8250: Add helper for clearing IER
  • From: Ilpo Järvinen
• [PATCH 1/8] tty: Remove baudrate dead code & make ktermios params const
  • From: Ilpo Järvinen
• [PATCH 3/8] serial: dz: Assume previous baudrate is valid
  • From: Ilpo Järvinen
• [PATCH 8/8] tty: Make ->set_termios() old ktermios const
  • From: Ilpo Järvinen
• [PATCH 4/8] tty: Make tty_termios_copy_hw() old ktermios const
  • From: Ilpo Järvinen
• [PATCH 0/8] tty/serial: Convert ->set_termios() related callchains to const old ktermios
  • From: Ilpo Järvinen
• [PATCH 6/8] serial: Make ->set_termios() old ktermios const
  • From: Ilpo Järvinen
• [PATCH 5/8] tty: Make ldisc ->set_termios() old ktermios const
  • From: Ilpo Järvinen
• [PATCH 7/8] usb: serial: Make ->set_termios() old ktermios const
  • From: Ilpo Järvinen
• [PATCH 2/8] tty: Fix comment style in tty_termios_input_baud_rate()
  • From: Ilpo Järvinen
• [PATCH] MAINTAINERS: Update email of Neil Armstrong
  • From: Neil Armstrong
• Re: [PATCH] serial: icom: Fix some indentation
  • From: Jiri Slaby
• Re: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Florian Fainelli
• [PATCH] serial: icom: Fix some indentation
  • From: Christophe JAILLET
• Re: [PATCH] tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Sherry Sun
• RE: [PATCH] tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency
  • From: Sherry Sun
• [PATCH AUTOSEL 4.9 1/8] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 1/9] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 02/14] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 02/16] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 02/19] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 02/28] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 5.18 02/39] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• [PATCH AUTOSEL 5.19 03/48] tty: serial: Fix refcount leak bug in ucc_uart.c
  • From: Sasha Levin
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: kernel test robot
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: kernel test robot
• [PATCH] serial: 8250_bcm7271: move spin_lock_irqsave to spin_lock in irq handler
  • From: Tuo Cao
• Re: [PATCH] serial: stm32: make info structs static to avoid sparse warnings
  • From: Jiri Slaby
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Lukas Wunner
• Re: [PATCH v1 1/2] serial: pic32_uart: Utilize uart_console_enabled()
  • From: Ilpo Järvinen
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• Re: [GIT PULL] TTY/Serial driver changes for 6.0-rc1
  • From: pr-tracker-bot
• Re: [PATCH v2 1/3] drivers: serial: earlycon: Correct argument name
  • From: Rob Herring
• Re: [PATCH] serial: fsl_lpuart: Remove repeated word
  • From: Greg KH
• [PATCH] serial: fsl_lpuart: Remove repeated word
  • From: shaomin Deng
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [GIT PULL] TTY/Serial driver changes for 6.0-rc1
  • From: Greg KH
• Re: [PATCH v2 1/3] drivers: serial: earlycon: Correct argument name
  • From: kernel test robot
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: kernel test robot
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Greg Kroah-Hartman
• [PATCH v1 1/2] serial: pic32_uart: Utilize uart_console_enabled()
  • From: Andy Shevchenko
• [PATCH v1 2/2] serial: pic32_uart: Convert to use GPIO descriptors
  • From: Andy Shevchenko
• Re: [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: Andy Shevchenko
• Re: [PATCH v2 1/3] drivers: serial: earlycon: Correct argument name
  • From: Andy Shevchenko
• [PATCH v2 3/3] efi: earlycon: Add support for generic framebuffers and move to console subsystem
  • From: Markuss Broks
• [PATCH v2 2/3] drivers: serial: earlycon: Pass device-tree node
  • From: Markuss Broks
• [PATCH v2 1/3] drivers: serial: earlycon: Correct argument name
  • From: Markuss Broks
• [PATCH v2 0/3] Add generic framebuffer support to EFI earlycon driver
  • From: Markuss Broks
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Markuss Broks
• [PATCH v2 1/1] serial: fsl_lpuart: RS485 RTS polariy is inverse
  • From: Shenwei Wang
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Roosen Henri
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Lukas Wunner
• Re: [EXT] Re: [PATCH 1/1] serial: fsl_lpuart: RS485 RTS polariy is inverse
  • From: Jiri Slaby
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Roosen Henri
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Lukas Wunner
• Re: [PATCH] serial: Fix incorrect rs485 polarity on uart open
  • From: Roosen Henri
• RE: [EXT] Re: [PATCH 1/1] serial: fsl_lpuart: RS485 RTS polariy is inverse
  • From: Shenwei Wang
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH V2] tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
  • From: Sherry Sun
• Re: [PATCH] tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  • From: Jiri Slaby
• Re: [PATCH 1/1] serial: fsl_lpuart: RS485 RTS polariy is inverse
  • From: Jiri Slaby
• RE: [PATCH] tty: serial: lpuart: disable flow control when wait transmit engine complete
  • From: Sherry Sun
• Re: [PATCH] tty: serial: lpuart: disable flow control when wait transmit engine complete
  • From: Jiri Slaby
• [tty:tty-testing] BUILD SUCCESS 0fec518018cc5ceffa706370b6e3acbbb1e3c798
  • From: kernel test robot
• [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang
• [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang
• [PATCH] serial: fsl_lpuart: Fix comment typo
  • From: Jason Wang
• RE: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Sherry Sun
• Re: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Uwe Kleine-König
• RE: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Sherry Sun
• Re: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Sherry Sun
• Re: [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Ahmad Fatoum
• [PATCH] tty: serial: imx: initialize peripheral_config/peripheral_size for sdma config
  • From: Sherry Sun
• Re: linux-next: build failure after merge of the tty tree
  • From: Greg KH
• [PATCH] tty: serial: lpuart: disable flow control when wait transmit engine complete
  • From: Sherry Sun
• Re: linux-next: build failure after merge of the tty tree
  • From: Doug Anderson
• [PATCH] tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  • From: Douglas Anderson
• linux-next: build failure after merge of the tty tree
  • From: broonie
• [PATCH 1/1] serial: fsl_lpuart: RS485 RTS polariy is inverse
  • From: Shenwei Wang
• [PATCH] tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency
  • From: Sherry Sun
• RE: [PATCH v2 2/7] tty: xilinx_uartps: Update copyright text to correct format
  • From: Datta, Shubhrajyoti
• Re: [PATCH] vt: remove old FONT ioctls definitions in uapi
  • From: Greg KH
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Andy Shevchenko
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Markuss Broks
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• Re: [PATCH] vt: remove old FONT ioctls definitions in uapi
  • From: Adam Borowski
• Re: [PATCH v2 2/7] tty: xilinx_uartps: Update copyright text to correct format
  • From: Greg KH
• [PATCH v2 7/7] tty: xilinx_uartps: Check the clk_enable return value
  • From: Shubhrajyoti Datta
• [PATCH v2 6/7] tty: xilinx_uartps: Add timeout waiting for loop
  • From: Shubhrajyoti Datta
• [PATCH v2 2/7] tty: xilinx_uartps: Update copyright text to correct format
  • From: Shubhrajyoti Datta
• [PATCH v2 4/7] tty: xilinx_uartps: Fix the ignore_status
  • From: Shubhrajyoti Datta
• [PATCH v2 5/7] tty: xilinx_uartps: Prevent writes when the controller is disabled
  • From: Shubhrajyoti Datta
• [PATCH v2 3/7] tty: xilinx_uartps: Initialise the read_status_mask
  • From: Shubhrajyoti Datta
• [PATCH v2 1/7] tty: xilinx_uartps: Check clk_enable return value
  • From: Shubhrajyoti Datta
• [PATCH v2 0/7] tty: xilinx_uartps: fixes and improvements
  • From: Shubhrajyoti Datta
• Re: [PATCH 1/2] drivers: serial: earlycon: Pass device-tree node
  • From: Andy Shevchenko
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [PATCH 1/2] drivers: serial: earlycon: Pass device-tree node
  • From: Greg Kroah-Hartman
• Re: [EXT] Re: [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• [tty:tty-testing] BUILD SUCCESS 014482b667d3550d7a610c5f11b6351fe47eb39a
  • From: kernel test robot
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: kernel test robot
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Andy Shevchenko
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Andy Shevchenko
• Re: [PATCH 1/2] drivers: serial: earlycon: Pass device-tree node
  • From: Andy Shevchenko
• Re: [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Florian Fainelli
• RE: [EXT] Re: [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Thomas Zimmermann
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Arnd Bergmann
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Markuss Broks
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Markuss Broks
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Arnd Bergmann
• Re: [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] drivers: serial: earlycon: Pass device-tree node
  • From: Greg Kroah-Hartman
• [PATCH 2/2] efi: earlycon: Add support for generic framebuffers and move to fbdev subsystem
  • From: Markuss Broks
• [PATCH 1/2] drivers: serial: earlycon: Pass device-tree node
  • From: Markuss Broks
• [PATCH 0/2] Add generic framebuffer support to EFI earlycon driver
  • From: Markuss Broks
• Re: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value
  • From: Greg KH
• RE: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value
  • From: Datta, Shubhrajyoti
• Re: [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Greg KH
• Re: [PATCH] vt: remove old FONT ioctls definitions in uapi
  • From: Greg KH
• [PATCH 6/6] tty: serial: document uart_get_console()
  • From: Jiri Slaby
• [PATCH 3/6] Documentation: serial: move GPIO kernel-doc to the functions
  • From: Jiri Slaby
• [PATCH 5/6] tty: serial: serial_core, reformat kernel-doc for functions
  • From: Jiri Slaby
• [PATCH 4/6] Documentation: serial: link uart_ops properly
  • From: Jiri Slaby
• [PATCH 1/6] Documentation: serial: move uart_ops documentation to the struct
  • From: Jiri Slaby
• [PATCH 2/6] Documentation: serial: dedup kernel-doc for uart functions
  • From: Jiri Slaby
• Re: [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Rafał Miłecki
• [PATCH] dt-bindings: serial: renesas,scif: Document RZ/Five SoC
  • From: Lad Prabhakar
• Re: [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Vanessa Page
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur
• [PATCH] serial: mvebu-uart: uart2 error bits clearing
  • From: Pali Rohár
• Re: [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Philipp Zabel
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [PATCH 12/22] dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  • From: Rob Herring
• Re: [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Wolfram Sang
• [PATCH v2 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang
• [PATCH v2 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang
• [PATCH V2] tty: serial: fsl_lpuart: correct the count of break characters
  • From: Sherry Sun
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH 12/22] dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  • From: Jagan Teki
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• RE: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Sherry Sun
• [PATCH] vt: remove old FONT ioctls definitions in uapi
  • From: Xingrui Yi
• [PATCH] serial: stm32: make info structs static to avoid sparse warnings
  • From: Ben Dooks
• Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang
• Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Bjorn Helgaas
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang
• Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Rafał Miłecki
• Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Rafał Miłecki
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Rafał Miłecki
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Vanessa Page
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Vanessa Page
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Vanessa Page
• Re: [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: Guenter Roeck
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Florian Fainelli
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Florian Fainelli
• [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang
• [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang
• [PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang
• [PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang
• Re: [PATCH v2 2/2] serial: pl011: Add support for Xilinx Uart
  • From: Rob Herring
• Re: [PATCH v2 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Rob Herring
• [PATCH v2 2/2] serial: pl011: Add support for Xilinx Uart
  • From: Shubhrajyoti Datta
• [PATCH v2 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Shubhrajyoti Datta
• [PATCH v2 0/2] serial: pl011: Add xilinx uart
  • From: Shubhrajyoti Datta
• Re: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Michal Simek
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur
• [tty:tty-testing] BUILD SUCCESS af77c56aa35325daa2bc2bed5c2ebf169be61b86
  • From: kernel test robot
• RE: [EXT] Re: [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Shenwei Wang
• Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Arnd Bergmann
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [PATCH V2 1/1] serial: fsl_lpuart: zero out parity bit in CS7 mode
  • From: Ilpo Järvinen
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• Re: [PATCH v8 04/16] clk: npcm8xx: add clock controller
  • From: Stephen Boyd
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• Re: [PATCH v7 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Arnd Bergmann
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Johan Hovold
• Re: [PATCH] serial: remove VR41XX serial driver
  • From: Jiri Slaby
• Re: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Jiri Slaby
• Re: [Regression] CH341 USB-serial converter passes data in 32 byte chunks
  • From: Jonathan Woithe
• [PATCH v9 06/16] ARM: dts: nuvoton: add reset syscon property
  • From: Tomer Maimon
• [PATCH v9 10/16] dt-bindings: arm: npcm: Add maintainer
  • From: Tomer Maimon
• [PATCH v9 15/16] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  • From: Tomer Maimon
• [PATCH v9 11/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v9 16/16] arm64: defconfig: Add Nuvoton NPCM family support
  • From: Tomer Maimon
• [PATCH v9 12/16] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  • From: Tomer Maimon
• [PATCH v9 01/16] dt-bindings: timer: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v9 13/16] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v9 09/16] reset: npcm: Add NPCM8XX support
  • From: Tomer Maimon
• [PATCH v9 14/16] arm64: dts: nuvoton: Add initial NPCM8XX device tree
  • From: Tomer Maimon
• [PATCH v9 07/16] reset: npcm: using syscon instead of device data
  • From: Tomer Maimon
• [PATCH v9 08/16] dt-bindings: reset: npcm: Add support for NPCM8XX
  • From: Tomer Maimon
• [PATCH v9 04/16] clk: npcm8xx: add clock controller
  • From: Tomer Maimon
• [PATCH v9 03/16] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  • From: Tomer Maimon
• [PATCH v9 00/16] Introduce Nuvoton Arbel NPCM8XX BMC SoC
  • From: Tomer Maimon
• [PATCH v9 02/16] dt-bindings: watchdog: npcm: Add npcm845 compatible string
  • From: Tomer Maimon
• [PATCH v9 05/16] dt-bindings: reset: npcm: add GCR syscon property
  • From: Tomer Maimon
• [tty:tty-testing 77/77] arch/mips/vr41xx/common/siu.c:18:9: error: 'PORT_VR41XX_SIU' undeclared here (not in a function)
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS ceefa81e6e69b020997205e5c30a42d43aa5ae63
  • From: kernel test robot
• Re: [GIT PULL] TTY/Serial driver fixes for 5.19-rc7
  • From: pr-tracker-bot
• Re: [GIT PULL] TTY/Serial driver fixes for 5.19-rc7
  • From: Linus Torvalds
• [GIT PULL] TTY/Serial driver fixes for 5.19-rc7
  • From: Greg KH
• [V6] tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  • From: Vijaya Krishna Nivarthi
• [tty:tty-testing] BUILD SUCCESS 5095ca634f8b134cc202a5f5e4985d2b81f0ef0a
  • From: kernel test robot
• [PATCH] serial: remove VR41XX serial driver
  • From: Thomas Bogendoerfer
• Re: [PATCH 1/2] tty: serial: fsl_lpuart: correct the count of break characters
  • From: Michael Walle
• Re: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Michael Walle
• RE: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Sherry Sun
• Re: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Michael Walle
• RE: [PATCH 2/2] tty: serial: fsl_lpuart: writing a 1 and then a 0 to trigger a break character
  • From: Sherry Sun