Linux Renesas SOC
[Prev Page][Next Page]
- Re: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
- Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
- RE: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
- Re: [PATCH -next] i2c: sh_mobile: remove unneeded semicolon
- Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
- Re: [PATCH 1/2] arm64: dts: renesas: Remove empty lvds endpoints
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- [PATCH 5/5] ASoC: sh: rz-ssi: Add functions to get/set substream pointer
- [PATCH 4/5] ASoC: sh: rz-ssi: Make return type of rz_ssi_stream_is_valid() to bool
- [PATCH 3/5] ASoC: sh: rz-ssi: Drop ssi parameter from rz_ssi_stream_init()
- [PATCH 2/5] ASoC: sh: rz-ssi: Make the data structures available before registering the handlers
- [PATCH 1/5] ASoC: sh: rz-ssi: Drop calling rz_ssi_pio_recv() recursively
- [PATCH 0/5] ASoC: sh: rz-ssi: Code cleanup and fixes
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
- Re: [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
- Re: [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
- Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
- Re: [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
- Re: [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
- Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
- RE: [PATCH] i2c: rcar: add SMBus block read support
- Re: [PATCH] media: i2c: rdacm20: Fix indentation in comment
- Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
- Re: [PATCH] iio: adc: rzg2l_adc: Fix typo
- Re: [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
- Re: [PATCH v2 01/11] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- Re: [PATCH v2 03/11] dt-bindings: media: i2c: max9286: Add property to select bus width
- Re: [PATCH v2 12/11] media: i2c: max9286: Print power-up GMSL link configuration
- Re: [PATCH v2 11/11] media: i2c: max9286: Select HS as data enable signal
- Re: [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
- Re: [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
- Re: [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
- Re: [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
- Re: [PATCH v2 06/11] media: i2c: max9286: Rename MAX9286_DATATYPE_RAW11 to RAW12
- Re: [PATCH v2 05/11] media: i2c: max9286: Support manual framesync operation
- Re: [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [PATCH] iio: adc: rzg2l_adc: Fix typo
- [PATCH -next] i2c: sh_mobile: remove unneeded semicolon
- [PATCH] iio: adc: rzg2l_adc: Fix typo
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- [PATCH] clk: renesas: r8a779f0: Fix RSW2 clock divider
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [PATCH v13 3/5] arm64: perf: Add userspace counter access disable switch
- Re: [RFT PATCH] ARM: suspend: switch to swapper_pg_dir before using the vmap'ed stack
- Re: [RFT PATCH] ARM: suspend: switch to swapper_pg_dir before using the vmap'ed stack
- Re: [PATCH] can: rcar_canfd: Make sure we free CAN network device
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- [PATCH] can: rcar_canfd: Make sure we free CAN network device
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [PATCH 0/2] arm64: dts: renesas: r8a779a0: Add INTC-EX support
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- [PATCH v1.1 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [RFC PATCH 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
- Re: [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- From: Russell King (Oracle)
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH v13 3/5] arm64: perf: Add userspace counter access disable switch
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH] gpio: rcar: Propagate errors from devm_request_irq()
- From: Bartosz Golaszewski
- Re: [PATCH 2/2] gpio: rcar: Use platform_get_irq() to get the interrupt
- From: Bartosz Golaszewski
- Re: [PATCH 1/2] gpio: ts5500: Use platform_get_irq() to get the interrupt
- From: Bartosz Golaszewski
- Re: [PATCH 3/3] dt-bindings: display: bridge: renesas,lvds: Document r8a77961 bindings
- Re: [PATCH] gpio: rcar: Propagate errors from devm_request_irq()
- Re: [PATCH] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add description for power-source property
- [PATCH v3 4/4] watchdog: rzg2l_wdt: Add set_timeout callback
- [PATCH v3 3/4] watchdog: rzg2l_wdt: Add error check for reset_control_deassert
- [PATCH v3 2/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
- [PATCH v3 1/4] watchdog: rzg2l_wdt: Fix 32bit overflow issue
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- RE: [PATCH v2 4/4] watchdog: rzg2l_wdt: Use force reset for WDT reset
- RE: [PATCH v2 2/4] watchdog: rzg2l_wdt: Add error check for reset_control_{deassert/reset}
- Re: [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
- Re: [PATCH] gpio: rcar: Propagate errors from devm_request_irq()
- [PATCH] gpio: rcar: Propagate errors from devm_request_irq()
- [PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- [geert-renesas-devel:master] BUILD SUCCESS 742d780d939d62803bacae8de6b8ecf30792d391
- Re: [PATCH v13 3/5] arm64: perf: Add userspace counter access disable switch
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- renesas/master baseline: 377 runs, 2 regressions (renesas-devel-2022-01-03-v5.16-rc8)
- [RFC PATCH 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
- [RFC PATCH 7/8] media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_CHANNEL_* flags
- [RFC PATCH 6/8] media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_*_LANE flags
- [RFC PATCH 5/8] media: v4l2-mediabus: Use structures to describe bus configuration
- [RFC PATCH 4/8] media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.h
- [RFC PATCH 3/8] media: v4l2-subdev: Drop .set_mbus_config() operation
- [RFC PATCH 1/8] media: pxa_camera: Drop usage of .set_mbus_config()
- [RFC PATCH 2/8] media: i2c: ov6650: Drop implementation of .set_mbus_config()
- [RFC PATCH 0/8] media: Drop .set_mbus_config(), improve .get_mbus_config()
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- Re: [PATCH v2 0/2] dmaengine: rcar-dmac: Add support for R-Car S4-8
- Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- Re: [PATCH] media: i2c: max9271: Add header include guards to max9271.h
- [PATCH] media: i2c: max9271: Add header include guards to max9271.h
- Re: [PATCH] media: i2c: rdacm20: Fix indentation in comment
- [PATCH v2 12/11] media: i2c: max9286: Print power-up GMSL link configuration
- Re: [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
- [PATCH v2 11/11] media: i2c: max9286: Select HS as data enable signal
- [PATCH v2 09/11] media: i2c: max9286: Configure remote I2C speed from device tree
- [PATCH v2 10/11] media: i2c: max9286: Configure bus width from device tree
- [PATCH v2 08/11] media: i2c: max9286: Define macros for all bits of register 0x15
- [PATCH v2 07/11] media: i2c: max9286: Support 12-bit raw bayer formats
- [PATCH v2 06/11] media: i2c: max9286: Rename MAX9286_DATATYPE_RAW11 to RAW12
- [PATCH v2 04/11] media: i2c: max9286: Add support for port regulators
- [PATCH v2 05/11] media: i2c: max9286: Support manual framesync operation
- [PATCH v2 02/11] dt-bindings: media: i2c: max9286: Add property to select I2C speed
- [PATCH v2 03/11] dt-bindings: media: i2c: max9286: Add property to select bus width
- [PATCH v2 00/11] media: i2c: max9286: Small new features
- [PATCH v2 01/11] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- [PATCH] media: i2c: rdacm20: Fix indentation in comment
- Re: [PATCH] serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
- Re: [PATCH] serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- [PATCH v3] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
- Re: [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
- Re: [PATCH] serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH] pinctrl: renesas: r8a7791: Remove INTC_IRQx_N
- Re: [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- [PATCH v2 3/3] arm64: dts: renesas: Add panel overlay for Draak and Ebisu boards
- [PATCH v2 2/3] arm64: dts: renesas: Add panel overlay for Salvator-X(S) boards
- [PATCH v2 0/3] arm64: dts: renesas: Prepare AA1024XD12 panel .dtsi for overlay support
- [PATCH v2 1/3] arm64: dts: renesas: Prepare AA1024XD12 panel .dtsi for overlay support
- [PATCH 2/2] arm64: dts: renesas: Remove empty rgb output endpoints
- [PATCH 1/2] arm64: dts: renesas: Remove empty lvds endpoints
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 1/3] drm: rcar-du: lvds: Add r8a77961 support
- Re: [PATCH 3/3] dt-bindings: display: bridge: renesas,lvds: Document r8a77961 bindings
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [GIT PULL] clk: renesas: Updates for v5.17 (take two)
- [geert-renesas-drivers:master] BUILD SUCCESS 46d6b2811be934ba861659b49092c4bdd588f777
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH/RFC] drivers/irqchip: add irq-inverter
- [PATCH/RFC] drivers/irqchip: add irq-inverter
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- renesas-drivers-2021-12-28-v5.16-rc7
- Re: [PATCH v4 7/7] ARM: implement support for vmap'ed stacks
- [geert-renesas-devel:master] BUILD SUCCESS 70c9b40ad59ce28a6c668a48cc12f21ebf81aeba
- Re: [PATCH v13 3/5] arm64: perf: Add userspace counter access disable switch
- [geert-renesas-devel:topic/renesas-defconfig] BUILD SUCCESS 2b8261807a4adb23a6c366a997725154855a19e1
- Re: [PATCH 04/13] media: s5p-mfc: Use platform_get_irq() to get the interrupt
- renesas/master baseline: 421 runs, 1 regressions (renesas-devel-2021-12-27-v5.16-rc7)
- renesas/master baseline-nfs: 55 runs, 1 regressions (renesas-devel-2021-12-27-v5.16-rc7)
- renesas/master sleep: 7 runs, 1 regressions (renesas-devel-2021-12-27-v5.16-rc7)
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH] clk: renesas: r8a7799[05]: Add MLP clocks
- [PATCH 3/3 v2] arm64: dts: renesas: add MOST device
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- [PATCH 3/3] arm64: dts: renesas: add MOST device
- [PATCH 2/3] staging: most: dim2: use consistent routine naming
- [PATCH 1/3] staging: most: dim2: update renesas compatible string
- [PATCH 0/3] Renesas R-Car Gen3: add support for MOST device
- Re: [PATCH 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt
- RE: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- From: Prabhakar Mahadev Lad
- [PATCH] clk: renesas: r8a7799[05]: Add MLP clocks
- [PATCH] pinctrl: renesas: r8a7799[05]: Add MediaLB pins
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/2] gpio: rcar: Use platform_get_irq() to get the interrupt
- Re: [PATCH 2/2] gpio: rcar: Use platform_get_irq() to get the interrupt
- Re: [PATCH v2] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- [PATCH] arm64: dts: renesas: ulcb-kf: add KF HDMI output
- [PATCH v2] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2] arm64: dts: renesas: r8a77961: Add lvds0 device node
- [PATCH 3/3] dt-bindings: display: bridge: renesas,lvds: Document r8a77961 bindings
- [PATCH 2/3] arm64: dts: renesas: r8a77961: Add lvds0 device node
- [PATCH 1/3] drm: rcar-du: lvds: Add r8a77961 support
- [PATCH 0/3] add R-Car M3-W+ (r8a99761) LVDS encoder support
- Re: [PATCH v2] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH 02/13] media: camss: Use platform_get_irq_byname() to get the interrupt
- [PATCH 13/13] media: coda: Use platform_get_irq() to get the interrupt
- [PATCH 12/13] media: mtk-vpu: Drop unnecessary call to platform_get_resource()
- [PATCH 11/13] media: s5p-g2d: Use platform_get_irq() to get the interrupt
- [PATCH 10/13] media: exynos4-is: Use platform_get_irq() to get the interrupt
- [PATCH 09/13] media: mtk-vcodec: Drop unnecessary call to platform_get_resource()
- [PATCH 08/13] media: marvell-ccic: Use platform_get_irq() to get the interrupt
- [PATCH 07/13] media: exynos-gsc: Use platform_get_irq() to get the interrupt
- [PATCH 06/13] media: davinci: vpif: Use platform_get_irq_optional() to get the interrupt
- [PATCH 04/13] media: s5p-mfc: Use platform_get_irq() to get the interrupt
- [PATCH 05/13] media: stm32-dma2d: Use platform_get_irq() to get the interrupt
- [PATCH 03/13] media: bdisp: Use platform_get_irq() to get the interrupt
- [PATCH 02/13] media: camss: Use platform_get_irq_byname() to get the interrupt
- [PATCH 01/13] media: vsp1: Use platform_get_irq() to get the interrupt
- [PATCH 00/13] media: Use platform_get_irq*() variants to fetch IRQ's
- [PATCH 04/10] pinctrl: renesas: checker: Simplify same_name()
- [PATCH 05/10] pinctrl: renesas: checker: Add pin group sharing checks
- [PATCH 07/10] pinctrl: renesas: checker: Validate drive strength configs consistency
- [PATCH 10/10] pinctrl: renesas: checker: Check drive pin conflicts
- [PATCH 00/10] pinctrl: renesas: checker: Miscellaneous improvements
- [PATCH 02/10] pinctrl: renesas: Factor out .pin_to_portcr() address handling
- [PATCH 06/10] pinctrl: renesas: checker: Validate bias configs consistency
- [PATCH 08/10] pinctrl: renesas: checker: Validate I/O voltage configs consistency
- [PATCH 09/10] pinctrl: renesas: checker: Check bias pin conflicts
- [PATCH 01/10] pinctrl: renesas: Remove unused pfc parameter from .pin_to_pocctrl()
- [PATCH 03/10] pinctrl: renesas: Pass sh_pfc_soc_info to rcar_pin_to_bias_reg()
- [PATCH 36/60] pinctrl: renesas: r8a779a0: Share QSPI pin group data
- [PATCH 55/60] pinctrl: renesas: r8a7790: Share USB1 pin group data
- [PATCH 52/60] pinctrl: renesas: r8a77990: Share SDHI pin group data
- [PATCH 21/60] pinctrl: renesas: r8a77970: Share MMC pin group data
- [PATCH 15/60] pinctrl: renesas: r8a77470: Share MMC pin group data
- [PATCH 43/60] pinctrl: renesas: r8a7779: Share SDHI pin group data
- [PATCH 45/60] pinctrl: renesas: r8a7791: Share SDHI pin group data
- [PATCH 42/60] pinctrl: renesas: r8a7778: Share SDHI pin group data
- [PATCH 58/60] pinctrl: renesas: r8a7796: Share more VIN pin group data
- [PATCH 60/60] pinctrl: renesas: r8a77990: Share more VIN pin group data
- [PATCH 59/60] pinctrl: renesas: r8a77965: Share more VIN pin group data
- [PATCH 39/60] pinctrl: renesas: r8a73a4: Share SDHI pin group data
- [PATCH 34/60] pinctrl: renesas: r8a7796: Share QSPI pin group data
- [PATCH 12/60] pinctrl: renesas: sh73a0: Share LCD pin group data
- [PATCH 28/60] pinctrl: renesas: r8a7791: Share QSPI pin group data
- [PATCH 35/60] pinctrl: renesas: r8a77990: Share QSPI pin group data
- [PATCH 40/60] pinctrl: renesas: r8a7740: Share SDHI pin group data
- [PATCH 41/60] pinctrl: renesas: r8a77470: Share SDHI pin group data
- [PATCH 57/60] pinctrl: renesas: r8a77951: Share more VIN pin group data
- [PATCH 53/60] pinctrl: renesas: sh73a0: Share SDHI pin group data
- [PATCH 37/60] pinctrl: renesas: r8a77970: Share RPC pin group data
- [PATCH 49/60] pinctrl: renesas: r8a77951: Share SDHI pin group data
- [PATCH 54/60] pinctrl: renesas: emev2: Share SDI pin group data
- [PATCH 38/60] pinctrl: renesas: r8a77980: Share RPC pin group data
- [PATCH 22/60] pinctrl: renesas: r8a77980: Share MMC pin group data
- [PATCH 04/60] pinctrl: renesas: Rename SH_PFC_PIN_GROUP{,_ALIAS} args
- [PATCH 09/60] pinctrl: renesas: r8a7791: Share HSCIF1 pin group data
- [PATCH 47/60] pinctrl: renesas: r8a7794: Share SDHI pin group data
- [PATCH 48/60] pinctrl: renesas: r8a77950: Share SDHI pin group data
- [PATCH 50/60] pinctrl: renesas: r8a77965: Share SDHI pin group data
- [PATCH 51/60] pinctrl: renesas: r8a7796: Share SDHI pin group data
- [PATCH 14/60] pinctrl: renesas: r8a7740: Share MMC pin group data
- [PATCH 46/60] pinctrl: renesas: r8a7792: Share SDHI pin group data
- [PATCH 06/60] pinctrl: renesas: Add generic support for resizable buses
- [PATCH 19/60] pinctrl: renesas: r8a7791: Share MMC pin group data
- [PATCH 20/60] pinctrl: renesas: r8a7794: Share MMC pin group data
- [PATCH 13/60] pinctrl: renesas: r8a73a4: Share MMC pin group data
- [PATCH 10/60] pinctrl: renesas: sh73a0: Share KEYIN pin group data
- [PATCH 27/60] pinctrl: renesas: r8a7790: Share QSPI pin group data
- [PATCH 24/60] pinctrl: renesas: r8a779a0: Share MMC pin group data
- [PATCH 17/60] pinctrl: renesas: r8a7779: Share MMC pin group data
- [PATCH 33/60] pinctrl: renesas: r8a77965: Share QSPI pin group data
- [PATCH 02/60] pinctrl: renesas: Rename sh_pfc_soc_operations instances
- [PATCH 32/60] pinctrl: renesas: r8a77951: Share QSPI pin group data
- [PATCH 18/60] pinctrl: renesas: r8a7790: Share MMC pin group data
- [PATCH 56/60] pinctrl: renesas: r8a7790: Share more VIN pin group data
- [PATCH 44/60] pinctrl: renesas: r8a7790: Share SDHI pin group data
- [PATCH 11/60] pinctrl: renesas: r8a7740: Share LCD pin group data
- [PATCH 26/60] pinctrl: renesas: r8a77470: Share QSPI pin group data
- [PATCH 16/60] pinctrl: renesas: r8a7778: Share MMC pin group data
- [PATCH 30/60] pinctrl: renesas: r8a7794: Share QSPI pin group data
- [PATCH 07/60] pinctrl: renesas: r8a7740: Share BSC pin group data
- [PATCH 01/60] pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
- [PATCH 05/60] pinctrl: renesas: Add generic support for pin group subsets
- [PATCH 08/60] pinctrl: renesas: emev2: Share CF pin group data
- [PATCH 31/60] pinctrl: renesas: r8a77950: Share QSPI pin group data
- [PATCH 29/60] pinctrl: renesas: r8a7792: Share QSPI pin group data
- [PATCH 25/60] pinctrl: renesas: sh73a0: Share MMC pin group data
- [PATCH 23/60] pinctrl: renesas: r8a77995: Share MMC pin group data
- [PATCH 03/60] pinctrl: renesas: Reformat macros defining struct initializers
- [PATCH 00/60] pinctrl: renesas: Share more pin group data
- [PATCH] pinctrl: renesas: r8a7794: Add range checking to .pin_to_pocctrl()
- [PATCH] pinctrl: renesas: r8a7791: Remove INTC_IRQx_N
- [PATCH] pinctrl: renesas: r8a7790: Remove INTC_IRQx_N
- [PATCH] clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
- [PATCH v2 18/23] PCI: rcar-gen2: Rename rcar_pci_priv to rcar_pci
- Re: [PATCH 02/16] dt-bindings: arm: renesas: Document SMARC EVK
- Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC
- Re: [PATCH 14/16] dt-bindings: net: renesas,etheravb: Document RZ/V2L SoC
- Re: [PATCH 13/16] dt-bindings: dma: rz-dmac: Document RZ/V2L SoC
- Re: [PATCH 11/16] dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl
- Re: [PATCH 09/16] dt-bindings: clock: renesas: Document RZ/V2L SoC
- Re: [PATCH 08/16] dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
- Re: [PATCH 07/16] dt-bindings: serial: renesas,sci: Document RZ/V2L SoC
- Re: [PATCH 06/16] dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
- Re: [PATCH 03/16] dt-bindings: power: renesas,rzg2l-sysc: Document RZ/V2L SoC
- Re: [PATCH 02/16] dt-bindings: arm: renesas: Document SMARC EVK
- Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC
- Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC
- [PATCH 2/2] gpio: rcar: Use platform_get_irq() to get the interrupt
- [PATCH 1/2] gpio: ts5500: Use platform_get_irq() to get the interrupt
- [PATCH 0/2] gpio: Use platform_get_irq*() variants to fetch IRQ's
- [PATCH 3/3] dmaengine: mediatek-cqdma: Use platform_get_irq() to get the interrupt
- [PATCH 2/3] dmaengine: mediatek: mtk-hsdma: Use platform_get_irq() to get the interrupt
- [PATCH 1/3] dmaengine: nbpfaxi: Use platform_get_irq_optional() to get the interrupt
- [PATCH 0/3] dmaengine: Use platform_get_irq*() variants to fetch IRQ's
- [PATCH] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add description for power-source property
- Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- [PATCH v2 1/2] dt-bindings: renesas,rcar-dmac: Add r8a779f0 support
- [PATCH v2 2/2] dmaengine: rcar-dmac: Add support for R-Car S4-8
- [PATCH v2 0/2] dmaengine: rcar-dmac: Add support for R-Car S4-8
- RE: [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- Re: [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- RE: [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- RE: [PATCH 1/3] dt-bindings: renesas,rcar-dmac: Add r8a779f0 support
- Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 0/3] serial: sh-sci: Clock handling improvements
- Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 3/3] arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
- Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
- Re: [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- Re: [PATCH 1/3] dt-bindings: renesas,rcar-dmac: Add r8a779f0 support
- Re: [PATCH v2] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
- Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- [PATCH v2 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's
- Re: [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- Re: [PATCH v6 2/4] mtd: rawnand: renesas: Add new NAND controller driver
- Re: [PATCH v6 3/4] MAINTAINERS: Add an entry for Renesas NAND controller
- [PATCH v2] dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- Re: [PATCH 11/16] dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC
- Re: [PATCH 3/3] arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
- Re: [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- [PATCH 16/16] arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK
- [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC
- [PATCH 14/16] dt-bindings: net: renesas,etheravb: Document RZ/V2L SoC
- [PATCH 13/16] dt-bindings: dma: rz-dmac: Document RZ/V2L SoC
- [PATCH 12/16] pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is enabled
- [PATCH 11/16] dt-bindings: pinctrl: renesas: Document RZ/V2L pinctrl
- [PATCH 10/16] clk: renesas: Add support for RZ/V2L SoC
- [PATCH 09/16] dt-bindings: clock: renesas: Document RZ/V2L SoC
- [PATCH 08/16] dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
- [PATCH 07/16] dt-bindings: serial: renesas,sci: Document RZ/V2L SoC
- [PATCH 06/16] dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
- [PATCH 05/16] arm64: renesas_defconfig: Enable ARCH_R9A07G054
- [PATCH 04/16] soc: renesas: Identify RZ/V2L SoC
- [PATCH 03/16] dt-bindings: power: renesas,rzg2l-sysc: Document RZ/V2L SoC
- [PATCH 02/16] dt-bindings: arm: renesas: Document SMARC EVK
- [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC
- [PATCH 00/16] Add new Renesas RZ/V2L SoC and Renesas RZ/V2L SMARC EVK support
- Re: [PATCH v6 3/4] MAINTAINERS: Add an entry for Renesas NAND controller
- Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
- Re: [PATCH] clk: renesas: r8a779f0: add sys-dmac clocks
- Re: [PATCH 0/6] usb: sound/soc: Use platform_get_irq*() variants to fetch IRQ's
- Re: [PATCH v4 1/6] media: i2c: ov5640: Remain in power down for DVP mode unless streaming
- [PATCH 3/3] arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
- [PATCH 2/3] dmaengine: rcar-dmac: Add support for R-Car S4-8
- [PATCH 1/3] dt-bindings: renesas,rcar-dmac: Add r8a779f0 support
- [PATCH 0/3] treewide: rcar-dmac: Add support for R-Car S4-8
- [PATCH] clk: renesas: r8a779f0: add sys-dmac clocks
- [geert-renesas-devel:master] BUILD SUCCESS 8398a361cd075d8ec3e1d68b246a67148a1486d1
- Re: [RFC PATCH 0/3] Add driver for Renesas RZ/G2L CRU module
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- [PATCH] soc: renesas: Add support for reading product revision for RZ/G2L family
- Re: [PATCH 1/2] remoteproc: rcar_rproc: fix pm_runtime_get_sync error check
- Re: [PATCH 4/6] usb: isp1760: Use platform_get_irq() to get the interrupt
- Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v2] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- renesas/master baseline: 383 runs, 6 regressions (renesas-devel-2021-12-20-v5.16-rc6)
- renesas/master baseline-nfs: 55 runs, 2 regressions (renesas-devel-2021-12-20-v5.16-rc6)
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/2] remoteproc: rcar_rproc: remove trailing semicolon
- Re: [PATCH 1/2] remoteproc: rcar_rproc: fix pm_runtime_get_sync error check
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- renesas/master usb: 2 runs, 1 regressions (renesas-devel-2021-12-20-v5.16-rc6)
- Re: [PATCH 5/6] usb: cdns3: Use platform_get_irq_byname() to get the interrupt
- Re: [PATCH 3/6] usb: dwc3: Drop unneeded calls to platform_get_resource_byname()
- Re: [PATCH] arm64: dts: beacon-renesom-som: Remove the 'pm-ignore-notify' property
- Re: [PATCH 0/3] serial: sh-sci: Clock handling improvements
- Re: [PATCH 4/6] usb: isp1760: Use platform_get_irq() to get the interrupt
- Re: [PATCH 1/6] usb: host: fotg210: Use platform_get_irq() to get the interrupt
- Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- Re: [GIT PULL] pinctrl: renesas: Updates for v5.17 (take two)
- [PATCH 3/6] usb: dwc3: Drop unneeded calls to platform_get_resource_byname()
- [PATCH 6/6] usb: musb: dsps: Use platform_get_irq_byname() to get the interrupt
- [PATCH 5/6] usb: cdns3: Use platform_get_irq_byname() to get the interrupt
- [PATCH 4/6] usb: isp1760: Use platform_get_irq() to get the interrupt
- [PATCH 2/6] usb: renesas_usbhs: Use platform_get_irq() to get the interrupt
- [PATCH 1/6] usb: host: fotg210: Use platform_get_irq() to get the interrupt
- [PATCH 0/6] usb: sound/soc: Use platform_get_irq*() variants to fetch IRQ's
- Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- [PATCH v6 1/1] gpio: add sloppy logic analyzer using polling
- [PATCH v6 0/1] gpio: add simple logic analyzer using polling
- Re: [PATCH v5 1/1] gpio: add sloppy logic analyzer using polling
- Re: [PATCH v5 1/1] gpio: add sloppy logic analyzer using polling
- Re: [PATCH 0/3] serial: sh-sci: Clock handling improvements
- Re: [PATCH 0/3] serial: sh-sci: Clock handling improvements
- Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
- [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
- [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
- [PATCH 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's
- [PATCH] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt
- Re: [PATCH v5 1/1] gpio: add sloppy logic analyzer using polling
- [geert-renesas-devel:master] BUILD SUCCESS 9aa3a08281f795eec94a1d7ee8c48ed7dec31a7c
- [geert-renesas-devel:renesas-arm-dt-for-v5.17] BUILD SUCCESS c9b7011768b5dbb68792b4bacad5ae913059ed74
- [geert-renesas-devel:next] BUILD SUCCESS 7430027307374f7d8cdec708f61b1bc22d95b913
- Re: [PATCH v6 4/4] ARM: dts: r9a06g032: Describe the NAND controller
- Re: [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- Re: [PATCH v6 2/4] mtd: rawnand: renesas: Add new NAND controller driver
- Re: [PATCH v6 3/4] MAINTAINERS: Add an entry for Renesas NAND controller
- renesas/next baseline: 332 runs, 2 regressions (renesas-next-2021-12-17-v5.16-rc1)
- renesas/next baseline-nfs: 46 runs, 2 regressions (renesas-next-2021-12-17-v5.16-rc1)
- Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- renesas/master baseline: 381 runs, 6 regressions (renesas-devel-2021-12-17-v5.16-rc5)
- renesas/master baseline-nfs: 53 runs, 1 regressions (renesas-devel-2021-12-17-v5.16-rc5)
- Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- renesas/next igt-kms-rockchip: 1 runs, 1 regressions (renesas-next-2021-12-17-v5.16-rc1)
- Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- Re: [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- Re: [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- Re: [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- renesas/master sleep: 6 runs, 5 regressions (renesas-devel-2021-12-17-v5.16-rc5)
- renesas/master igt-gpu-panfrost: 1 runs, 1 regressions (renesas-devel-2021-12-17-v5.16-rc5)
- [v8.1 3/7] media: i2c: max9286: Use "maxim,gpio-poc" property
- [PATCH v6 4/4] ARM: dts: r9a06g032: Describe the NAND controller
- [PATCH v6 3/4] MAINTAINERS: Add an entry for Renesas NAND controller
- [PATCH v6 2/4] mtd: rawnand: renesas: Add new NAND controller driver
- [PATCH v6 1/4] dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
- [PATCH v6 0/4] Renesas NAND controller support
- Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- Re: [PATCH v4 6/6] media: max9286: Implement get_frame_desc()
- Re: [PATCH v4 5/6] media: max9286: Move format to subdev state
- Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- Re: [PATCH v4 4/6] media: max9286: Use routes to configure link order
- Re: [PATCH v4 3/6] media: max9286: Use enabled routes to calculate pixelrate
- Re: [PATCH v4 2/6] media: max9286: Implement set_routing
- Re: [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- [GIT PULL] pinctrl: renesas: Updates for v5.17 (take two)
- [GIT PULL] clk: renesas: Updates for v5.17 (take two)
- [GIT PULL 0/4] Renesas SoC updates for v5.17 (take two)
- [GIT PULL 1/4] Renesas ARM defconfig updates for v5.17
- [GIT PULL 3/4] Renesas driver updates for v5.17 (take two)
- [GIT PULL 2/4] Renesas ARM DT updates for v5.17 (take two)
- [GIT PULL 4/4] Renesas DT binding updates for v5.17 (take two)
- Re: [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- Re: [PATCH v5 2/4] mtd: rawnand: rzn1: Add new NAND controller driver
- Re: [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- Re: [PATCH v5 2/4] mtd: rawnand: rzn1: Add new NAND controller driver
- Re: [PATCH 2/2] media: subdev: Extend routing validation helper
- Re: [PATCH 1/2] media: subdev: Rename v4l2_state_get_stream_format() with subdev prefix
- [PATCH v5 4/4] ARM: dts: r9a06g032: Describe NAND controller
- [PATCH v5 3/4] MAINTAINERS: Add an entry for Renesas RZ/N1 NAND controller
- [PATCH v5 2/4] mtd: rawnand: rzn1: Add new NAND controller driver
- [PATCH v5 1/4] dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
- [PATCH v5 0/4] Renesas RZ/N1 NAND controller support
- Re: [PATCH 3/5] media: adv748x: Move format to subdev state
- Re: [PATCH 2/5] media: adv748x: Add support for v4l2_subdev_state
- [geert-renesas-devel:renesas-arm-dt-for-v5.17] BUILD SUCCESS d563f4bac9914fca6f34711ad22647125e773dd0
- [geert-renesas-devel:next] BUILD SUCCESS a155038f641134b0272d26f75d1ab4a805013e48
- Re: [PATCH 4/5] media: adv748x: Implement .get_frame_desc()
- Re: [PATCH v4 5/6] media: max9286: Move format to subdev state
- Re: [PATCH v4 6/6] media: max9286: Implement get_frame_desc()
- Re: [PATCH 2/5] media: adv748x: Add support for v4l2_subdev_state
- Re: [PATCH v4 5/6] media: max9286: Move format to subdev state
- Re: [PATCH v4 4/6] media: max9286: Use routes to configure link order
- Re: [PATCH v4 3/6] media: max9286: Use enabled routes to calculate pixelrate
- Re: [PATCH v4 2/6] media: max9286: Implement set_routing
- Re: [PATCH v4 2/6] media: max9286: Implement set_routing
- Re: [PATCH v4 2/6] media: max9286: Implement set_routing
- [PATCH 3/3] media: i2c: max9286: Support manual framesync operation
- [PATCH 2/3] media: i2c: max9286: Add support for port regulators
- [PATCH 1/3] dt-bindings: media: i2c: max9286: Add support for per-port supplies
- [PATCH 0/3] media: i2c: max9286: Small new features
- Re: [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating
- Re: [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating
- renesas/master baseline: 518 runs, 4 regressions (renesas-devel-2021-12-16-v5.16-rc5)
- renesas/master baseline-nfs: 66 runs, 1 regressions (renesas-devel-2021-12-16-v5.16-rc5)
- Re: [PATCH v4 1/4] dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
- renesas/next baseline: 491 runs, 3 regressions (renesas-next-2021-12-16-v5.16-rc1)
- renesas/next baseline-nfs: 61 runs, 3 regressions (renesas-next-2021-12-16-v5.16-rc1)
- Re: [PATCH v4 1/6] media: max9286: Add support for v4l2_subdev_state
- renesas/master usb: 2 runs, 1 regressions (renesas-devel-2021-12-16-v5.16-rc5)
- renesas/master sleep: 6 runs, 1 regressions (renesas-devel-2021-12-16-v5.16-rc5)
- renesas/master igt-gpu-panfrost: 1 runs, 1 regressions (renesas-devel-2021-12-16-v5.16-rc5)
- [PATCH v4 6/6] media: max9286: Implement get_frame_desc()
- [PATCH v4 5/6] media: max9286: Move format to subdev state
- [PATCH v4 4/6] media: max9286: Use routes to configure link order
- [PATCH v4 3/6] media: max9286: Use enabled routes to calculate pixelrate
- [PATCH v4 2/6] media: max9286: Implement set_routing
- [PATCH v4 1/6] media: max9286: Add support for v4l2_subdev_state
- [PATCH v4 0/6] media: max9286: Add multiplexed streams support
- Re: [PATCH] irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
- renesas/next sleep: 3 runs, 2 regressions (renesas-next-2021-12-16-v5.16-rc1)
- renesas/next igt-gpu-panfrost: 1 runs, 1 regressions (renesas-next-2021-12-16-v5.16-rc1)
- [PATCH 5/5] media: adv748x: Implement set_routing
- [PATCH 4/5] media: adv748x: Implement .get_frame_desc()
- [PATCH 3/5] media: adv748x: Move format to subdev state
- [PATCH 2/5] media: adv748x: Add support for v4l2_subdev_state
- [PATCH 1/5] media: adv748x: Add flags to adv748x_subdev_init()
- [PATCH 0/5] media: adv748x: Add CSI-2 VC support
- [PATCH v8 7/7] DNI: arm64: dts: renesas: eagle: Include eagle-gmsl
- [PATCH v8 6/7] arm64: dts: renesas: Add GMSL cameras .dtsi
- [PATCH v8 5/7] arm64: dts: renesas: eagle: Enable MAX9286
- [PATCH v8 4/7] arm64: dts: renesas: condor: Enable MAX9286
- [PATCH v8 3/7] media: i2c: max9286: Use "maxim,gpio-poc" property
- [PATCH v8 2/7] dt-bindings: media: max9286: Define 'maxim,gpio-poc'
- [PATCH v8 1/7] dt-bindings: media: max9286: Re-indent example
- [PATCH v8 0/7] arm64: dts: renesas: Enable MAX9286 on Eagle and Condor
- [PATCH 2/2] remoteproc: rcar_rproc: remove trailing semicolon
- [PATCH 1/2] remoteproc: rcar_rproc: fix pm_runtime_get_sync error check
- [PATCH/LOCAL 4/5] arm64: renesas: defconfig: Enable CONFIG_SPI_RSPI
- [PATCH/LOCAL 2/5] arm64: renesas: defconfig: Errata update
- [PATCH/LOCAL 3/5] arm64: renesas: defconfig: Enable CONFIG_ARM64_RAS_EXTN
- [PATCH/LOCAL 5/5] arm64: renesas: defconfig: Enable R8A779F0 SoC
- [PATCH/LOCAL 0/5] arm64: renesas: defconfig: Refresh for v5.16-rc1 and misc updates
- [PATCH/LOCAL 1/5] arm64: renesas: defconfig: Refresh for v5.16-rc1
- Re: [PATCH 3/3] serial: sh-sci: Use devm_clk_get_optional()
- Re: [PATCH 2/3] serial: sh-sci: Use dev_err_probe()
- Re: [PATCH 1/3] serial: sh-sci: Drop support for "sci_ick" clock
- [PATCH] arm64: dts: renesas: Fix pin controller node names
- Re: [PATCH 3/3] serial: sh-sci: Use devm_clk_get_optional()
- Re: [PATCH 1/3] serial: sh-sci: Drop support for "sci_ick" clock
- Re: [PATCH 2/3] serial: sh-sci: Use dev_err_probe()
- Re: [PATCH] irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
- [PATCH 0/3] serial: sh-sci: Clock handling improvements
- [PATCH 2/3] serial: sh-sci: Use dev_err_probe()
- [PATCH 3/3] serial: sh-sci: Use devm_clk_get_optional()
- [PATCH 1/3] serial: sh-sci: Drop support for "sci_ick" clock
- RE: [PATCH v3 0/3] Add Mali-G31 GPU support for RZ/G2L SoC
- Re: [PATCH v3 0/3] Add Mali-G31 GPU support for RZ/G2L SoC
- Re: [PATCH v3 0/2] max9271: Fix pclk detect silent failure
- Re: [PATCH v4 0/4] Renesas RZ/N1 NAND controller support
- Re: [PATCH v4 0/4] Renesas RZ/N1 NAND controller support
- Re: [PATCH v4 0/4] Renesas RZ/N1 NAND controller support
- Re: [PATCH v3 0/3] Add Mali-G31 GPU support for RZ/G2L SoC
- Re: [PATCH v3 0/3] Add Mali-G31 GPU support for RZ/G2L SoC
- Re: [PATCH v3 0/3] Add Mali-G31 GPU support for RZ/G2L SoC
- Re: [PATCH v2 05/13] media: max9286: Move format to subdev state
- [PATCH 2/2] media: subdev: Extend routing validation helper
- [PATCH 1/2] media: subdev: Rename v4l2_state_get_stream_format() with subdev prefix
- [PATCH 0/2] v4l: Proposed improvements for muxed streams v10
- Re: [PATCH v2 02/13] media: max9286: Implement set_routing
- Re: [PATCH v2 05/13] media: max9286: Move format to subdev state
- Re: [PATCH v2 01/13] media: max9286: Add support for v4l2_subdev_state
- [PATCH 3/3] arm64: dts: renesas: Add initial device tree for RZ/G2LC SMARC EVK
- [PATCH 2/3] arm64: dts: renesas: Add initial DTSI for RZ/G2LC SoC
- [PATCH 1/3] arm64: dts: renesas: rzg2l-smarc: Move pinctrl definitions
- [PATCH 0/3] Add Renesas RZ/G2LC{SoC,SMARC EVK} support
- Re: [PATCH v4 4/4] ARM: dts: r9a06g032: Describe NAND controller
- Re: [PATCH v2 1/2] pinctrl: Get rid of duplicate of_node assignment in the drivers
- Re: [PATCH v4 2/4] mtd: rawnand: rzn1: Add new NAND controller driver
- [PATCH v4 4/4] ARM: dts: r9a06g032: Describe NAND controller
- [PATCH v4 0/4] Renesas RZ/N1 NAND controller support
- [PATCH v4 2/4] mtd: rawnand: rzn1: Add new NAND controller driver
- [PATCH v4 3/4] MAINTAINERS: Add an entry for Renesas RZ/N1 NAND controller
- [PATCH v4 1/4] dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
- Re: [PATCH v3 1/4] dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
- Re: [PATCH v1 1/2] pinctrl: Get rid of duplicate of_node assignment in the drivers
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 1/3] drm: rcar-du: DRM_RCAR_DW_HDMI should depend on ARCH_RENESAS
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 3/3] drm: rcar-du: DRM_RCAR_MIPI_DSI should depend on ARCH_RENESAS
- Re: [PATCH v1 1/2] pinctrl: Get rid of duplicate of_node assignment in the drivers
- Re: [PATCH 3/3] drm: rcar-du: DRM_RCAR_MIPI_DSI should depend on ARCH_RENESAS
- Re: [PATCH 1/3] drm: rcar-du: DRM_RCAR_DW_HDMI should depend on ARCH_RENESAS
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- Re: [PATCH 0/3] drm: rcar-du: Add missing dependencies
- Re: [PATCH 0/3] drm: rcar-du: Add missing dependencies
- [PATCH 1/3] drm: rcar-du: DRM_RCAR_DW_HDMI should depend on ARCH_RENESAS
- [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU
- [PATCH 0/3] drm: rcar-du: Add missing dependencies
- [PATCH 3/3] drm: rcar-du: DRM_RCAR_MIPI_DSI should depend on ARCH_RENESAS
- [geert-renesas-drivers:master] BUILD SUCCESS 5976b633c246b48016f038bab795157a82c11444
- [geert-renesas-devel:next] BUILD SUCCESS 54477c542f92fb4b93370861899dd916f8ced73d
- [geert-renesas-devel:master] BUILD SUCCESS 4061f230d33da18a476809abc03f2fa94eda6c56
- [geert-renesas-devel:renesas-arm-dt-for-v5.17] BUILD SUCCESS 88404c56fde05eb741552a33fdfe6d7d20c1c986
- renesas/master baseline: 447 runs, 3 regressions (renesas-devel-2021-12-14-v5.16-rc5)
- renesas/master baseline-nfs: 69 runs, 1 regressions (renesas-devel-2021-12-14-v5.16-rc5)
- renesas/master sleep: 6 runs, 5 regressions (renesas-devel-2021-12-14-v5.16-rc5)
- Re: [PATCH v3 1/4] dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
- RE: [PATCH v3 1/3] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
- Re: [PATCH v3 1/2] dt-bindings: serial: renesas,scif: Document r8a779f0 bindings
- Re: [PATCH v3 1/3] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
- Re: [PATCH v3 1/3] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
- renesas-drivers-2021-12-14-v5.16-rc5
- Re: [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device
- Re: [PATCH v5 2/2] arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
- [PATCH v2] arm64: dts: renesas: r8a77961: Add lvds0 device node
- Re: [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device
- Re: [PATCH] arm64: dts: renesas: r8a77961: Add lvsd0 device node
- [PATCH v2 1/2] pinctrl: Get rid of duplicate of_node assignment in the drivers
- [PATCH v2 2/2] pinctrl: Propagate firmware node from a parent device
- [PATCH v7 0/7] arm64: dts: renesas: Enable MAX9286 on Eagle and Condor
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
- Re: [PATCH v5 2/2] arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
- Re: [PATCH 2/2] arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA
- Re: [PATCH 1/2] arm64: dts: renesas: r9a07g044: Add TSU node
- Re: [PATCH v5 2/2] arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
- Re: [PATCH v5 1/2] arm64: dts: renesas: r8a779a0: Add DSI encoders
- Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block
- [geert-renesas-devel:master] BUILD SUCCESS 2d93a61c003c8e6bbc9e44c5ffc3eb00242028ef
- [PATCH] arm64: dts: renesas: r8a77961: Add lvsd0 device node
- renesas/master baseline: 471 runs, 2 regressions (renesas-devel-2021-12-13-v5.16-rc5)
- Re: [PATCH/RFC v2] dt-bindings: display: bridge: sil,sii9022: Convert to json-schema
- Re: [PATCH] media: vsp1: mask interrupts before enabling
- Re: [PATCH v3 0/2] Initial Renesas R-Car remoteproc support
- renesas/master usb: 2 runs, 1 regressions (renesas-devel-2021-12-13-v5.16-rc5)
- renesas/master sleep: 5 runs, 1 regressions (renesas-devel-2021-12-13-v5.16-rc5)
- Re: [PATCH v3 1/3] dt-bindings: gpu: mali-bifrost: Document RZ/G2L support
- [PATCH v1 2/2] pinctrl: Propagate firmware node from a parent device
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]