Re: [PATCH v2 1/3] arm64: dts: renesas: Prepare AA1024XD12 panel .dtsi for overlay support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Laurent Pinchart (2021-12-29 19:31:33)
> The Mitsubishi AA1024XD12 panel can be used for R-Car Gen2 and Gen3
> boards as an optional external panel. It is described in the
> arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi file as a direct child of the
> DT root node. This allows including r8a77xx-aa104xd12-panel.dtsi in
> board device trees, with other minor modifications, to enable the panel.
> 
> This is however not how external components should be modelled. Instead
> of modifying the board device tree to enable the panel, it should be
> compiled as a DT overlay, to be loaded by the boot loader.
> 
> Prepare the r8a77xx-aa104xd12-panel.dtsi file for this usage by
> declaring a panel node only, without hardcoding its path. Overlay
> sources can then include r8a77xx-aa104xd12-panel.dtsi where appropriate.
> 
> This change doesn't cause any regression as r8a77xx-aa104xd12-panel.dtsi
> is currently unused. As overlay support for this panel has only been
> tested with Gen3 hardware, and Gen2 support will require more
> development, move the file to arch/arm64/boot/dts/renesas/.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
>  .../arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi | 39 -------------------
>  .../boot/dts/renesas/panel-aa104xd12.dtsi     | 30 ++++++++++++++
>  2 files changed, 30 insertions(+), 39 deletions(-)
>  delete mode 100644 arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
>  create mode 100644 arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
> 
> diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
> deleted file mode 100644
> index 79fce67ebb1c..000000000000
> --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Common file for the AA104XD12 panel connected to Renesas R-Car boards
> - *
> - * Copyright (C) 2014 Renesas Electronics Corp.
> - */
> -
> -/ {
> -       panel {
> -               compatible = "mitsubishi,aa104xd12", "panel-lvds";
> -
> -               width-mm = <210>;
> -               height-mm = <158>;
> -               data-mapping = "jeida-18";
> -
> -               panel-timing {
> -                       /* 1024x768 @65Hz */
> -                       clock-frequency = <65000000>;
> -                       hactive = <1024>;
> -                       vactive = <768>;
> -                       hsync-len = <136>;
> -                       hfront-porch = <20>;
> -                       hback-porch = <160>;
> -                       vfront-porch = <3>;
> -                       vback-porch = <29>;
> -                       vsync-len = <6>;
> -               };
> -
> -               port {
> -                       panel_in: endpoint {
> -                               remote-endpoint = <&lvds_connector>;
> -                       };
> -               };
> -       };
> -};
> -
> -&lvds_connector {
> -       remote-endpoint = <&panel_in>;
> -};
> diff --git a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
> new file mode 100644
> index 000000000000..6e9f447d8fe1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi

Is this a device directly on the renesas board itself? I still wonder if
'extra' overlays should be in a subfolder here, or ... even potentially
some more common location - but this can do for now I guess.

And I see I gave this on v1, but /after/ you posted v2 ;-)

You can keep it though ...

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards.
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +panel {
> +       compatible = "mitsubishi,aa104xd12", "panel-lvds";
> +
> +       width-mm = <210>;
> +       height-mm = <158>;
> +       data-mapping = "jeida-18";
> +
> +       panel-timing {
> +               /* 1024x768 @65Hz */
> +               clock-frequency = <65000000>;
> +               hactive = <1024>;
> +               vactive = <768>;
> +               hsync-len = <136>;
> +               hfront-porch = <20>;
> +               hback-porch = <160>;
> +               vfront-porch = <3>;
> +               vback-porch = <29>;
> +               vsync-len = <6>;
> +       };
> +
> +       port {
> +       };
> +};
> -- 
> Regards,
> 
> Laurent Pinchart
>




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux