On Tue, Feb 15, 2022 at 01:15:40PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> On Tue, Feb 15, 2022 at 12:13:16PM +0100, Jacopo Mondi wrote:
> > On Mon, Jan 03, 2022 at 06:24:11PM +0200, Laurent Pinchart wrote:
> > > The media bus configuration is specified through a set of flags, some of
> > > which being mutually exclusive. This doesn't scale to express more
> > > complex configurations. Improve the API by replacing the single flags
> > > field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures.
> > > The flags themselves are still used in those structures, so they are
> > > kept here. Drivers are however updated to use structure fields instead
> > > of flags when already possible.
> > >
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/ipu-v3/ipu-csi.c | 6 ++---
> > > drivers/media/i2c/adv7180.c | 8 ++++---
> > > drivers/media/i2c/adv748x/adv748x-csi2.c | 18 +--------------
> > > drivers/media/i2c/ml86v7667.c | 5 +++--
> > > drivers/media/i2c/mt9m001.c | 8 ++++---
> > > drivers/media/i2c/mt9m111.c | 16 +++++++------
> > > drivers/media/i2c/ov6650.c | 14 ++++++------
> > > drivers/media/i2c/ov9640.c | 8 ++++---
> > > drivers/media/i2c/tc358743.c | 20 ++---------------
> > > drivers/media/i2c/tvp5150.c | 6 +++--
> > > drivers/media/platform/pxa_camera.c | 12 +++++-----
> > > drivers/media/platform/rcar-vin/rcar-csi2.c | 16 +++----------
> > > drivers/staging/media/imx/imx-media-csi.c | 7 +++---
> > > drivers/staging/media/imx/imx6-mipi-csi2.c | 25 +++------------------
> >
> > drivers conversions looks good to me
> >
> > > include/media/v4l2-mediabus.h | 20 ++++++++++++++---
> > > 15 files changed, 78 insertions(+), 111 deletions(-)
> > >
> > > diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
> > > index a9639d098893..778bc26d3ba5 100644
> > > --- a/drivers/gpu/ipu-v3/ipu-csi.c
> > > +++ b/drivers/gpu/ipu-v3/ipu-csi.c
> > > @@ -357,11 +357,11 @@ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
> > > switch (mbus_cfg->type) {
> > > case V4L2_MBUS_PARALLEL:
> > > csicfg->ext_vsync = 1;
> > > - csicfg->vsync_pol = (mbus_cfg->flags &
> > > + csicfg->vsync_pol = (mbus_cfg->bus.parallel.flags &
> > > V4L2_MBUS_VSYNC_ACTIVE_LOW) ? 1 : 0;
> > > - csicfg->hsync_pol = (mbus_cfg->flags &
> > > + csicfg->hsync_pol = (mbus_cfg->bus.parallel.flags &
> > > V4L2_MBUS_HSYNC_ACTIVE_LOW) ? 1 : 0;
> > > - csicfg->pixclk_pol = (mbus_cfg->flags &
> > > + csicfg->pixclk_pol = (mbus_cfg->bus.parallel.flags &
> > > V4L2_MBUS_PCLK_SAMPLE_FALLING) ? 1 : 0;
> > > csicfg->clk_mode = IPU_CSI_CLK_MODE_GATED_CLK;
> > > break;
> > > diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> > > index d9a99fcfacb1..286f5017d9c3 100644
> > > --- a/drivers/media/i2c/adv7180.c
> > > +++ b/drivers/media/i2c/adv7180.c
> > > @@ -784,7 +784,8 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd,
> > >
> > > if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
> > > cfg->type = V4L2_MBUS_CSI2_DPHY;
> > > - cfg->flags = V4L2_MBUS_CSI2_1_LANE |
> > > + cfg->bus.mipi_csi2.num_data_lanes = 1;
> > > + cfg->bus.mipi_csi2.flags =
> > > V4L2_MBUS_CSI2_CHANNEL_0 |
> > > V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> > > } else {
> > > @@ -792,8 +793,9 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd,
> > > * The ADV7180 sensor supports BT.601/656 output modes.
> > > * The BT.656 is default and not yet configurable by s/w.
> > > */
> > > - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> > > - V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > + cfg->bus.parallel.flags = V4L2_MBUS_MASTER |
> > > + V4L2_MBUS_PCLK_SAMPLE_RISING |
> > > + V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > cfg->type = V4L2_MBUS_BT656;
> > > }
> > >
> > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > > index 589e9644fcdc..bd4f3fe0e309 100644
> > > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > > @@ -222,23 +222,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad
> > > return -EINVAL;
> > >
> > > config->type = V4L2_MBUS_CSI2_DPHY;
> > > - switch (tx->active_lanes) {
> > > - case 1:
> > > - config->flags = V4L2_MBUS_CSI2_1_LANE;
> > > - break;
> > > -
> > > - case 2:
> > > - config->flags = V4L2_MBUS_CSI2_2_LANE;
> > > - break;
> > > -
> > > - case 3:
> > > - config->flags = V4L2_MBUS_CSI2_3_LANE;
> > > - break;
> > > -
> > > - case 4:
> > > - config->flags = V4L2_MBUS_CSI2_4_LANE;
> > > - break;
> > > - }
> > > + config->bus.mipi_csi2.num_data_lanes = tx->active_lanes;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c
> > > index 4a1410ebb4c8..48cc0b0922f4 100644
> > > --- a/drivers/media/i2c/ml86v7667.c
> > > +++ b/drivers/media/i2c/ml86v7667.c
> > > @@ -223,9 +223,10 @@ static int ml86v7667_get_mbus_config(struct v4l2_subdev *sd,
> > > unsigned int pad,
> > > struct v4l2_mbus_config *cfg)
> > > {
> > > - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> > > - V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > cfg->type = V4L2_MBUS_BT656;
> > > + cfg->bus.parallel.flags = V4L2_MBUS_MASTER |
> > > + V4L2_MBUS_PCLK_SAMPLE_RISING |
> > > + V4L2_MBUS_DATA_ACTIVE_HIGH;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c
> > > index c9f0bd997ea7..ad13b0c890c0 100644
> > > --- a/drivers/media/i2c/mt9m001.c
> > > +++ b/drivers/media/i2c/mt9m001.c
> > > @@ -695,10 +695,12 @@ static int mt9m001_get_mbus_config(struct v4l2_subdev *sd,
> > > struct v4l2_mbus_config *cfg)
> > > {
> > > /* MT9M001 has all capture_format parameters fixed */
> > > - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
> > > - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > > - V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
> > > cfg->type = V4L2_MBUS_PARALLEL;
> > > + cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
> > > + V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_DATA_ACTIVE_HIGH |
> > > + V4L2_MBUS_MASTER;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > > index 91a44359bcd3..6cf3ccf85d27 100644
> > > --- a/drivers/media/i2c/mt9m111.c
> > > +++ b/drivers/media/i2c/mt9m111.c
> > > @@ -1143,15 +1143,17 @@ static int mt9m111_get_mbus_config(struct v4l2_subdev *sd,
> > > {
> > > struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
> > >
> > > - cfg->flags = V4L2_MBUS_MASTER |
> > > - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > > - V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > -
> > > - cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_RISING :
> > > - V4L2_MBUS_PCLK_SAMPLE_FALLING;
> > > -
> > > cfg->type = V4L2_MBUS_PARALLEL;
> > >
> > > + cfg->bus.parallel.flags = V4L2_MBUS_MASTER |
> > > + V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > +
> > > + cfg->bus.parallel.flags |= mt9m111->pclk_sample ?
> > > + V4L2_MBUS_PCLK_SAMPLE_RISING :
> > > + V4L2_MBUS_PCLK_SAMPLE_FALLING;
> > > +
> > > return 0;
> > > }
> > >
> > > diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
> > > index 455a627e35a0..b2654b32bc62 100644
> > > --- a/drivers/media/i2c/ov6650.c
> > > +++ b/drivers/media/i2c/ov6650.c
> > > @@ -932,15 +932,15 @@ static int ov6650_get_mbus_config(struct v4l2_subdev *sd,
> > > if (ret)
> > > return ret;
> > >
> > > - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH
> > > - | ((comj & COMJ_VSYNC_HIGH) ? V4L2_MBUS_VSYNC_ACTIVE_HIGH
> > > - : V4L2_MBUS_VSYNC_ACTIVE_LOW)
> > > - | ((comf & COMF_HREF_LOW) ? V4L2_MBUS_HSYNC_ACTIVE_LOW
> > > - : V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> > > - | ((comj & COMJ_PCLK_RISING) ? V4L2_MBUS_PCLK_SAMPLE_RISING
> > > - : V4L2_MBUS_PCLK_SAMPLE_FALLING);
> > > cfg->type = V4L2_MBUS_PARALLEL;
> > >
> > > + cfg->bus.parallel.flags = V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH
> > > + | ((comj & COMJ_VSYNC_HIGH) ? V4L2_MBUS_VSYNC_ACTIVE_HIGH
> > > + : V4L2_MBUS_VSYNC_ACTIVE_LOW)
> > > + | ((comf & COMF_HREF_LOW) ? V4L2_MBUS_HSYNC_ACTIVE_LOW
> > > + : V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> > > + | ((comj & COMJ_PCLK_RISING) ? V4L2_MBUS_PCLK_SAMPLE_RISING
> > > + : V4L2_MBUS_PCLK_SAMPLE_FALLING);
> > > return 0;
> > > }
> > >
> > > diff --git a/drivers/media/i2c/ov9640.c b/drivers/media/i2c/ov9640.c
> > > index 0bab8c2cf160..9f44ed52d164 100644
> > > --- a/drivers/media/i2c/ov9640.c
> > > +++ b/drivers/media/i2c/ov9640.c
> > > @@ -652,10 +652,12 @@ static int ov9640_get_mbus_config(struct v4l2_subdev *sd,
> > > unsigned int pad,
> > > struct v4l2_mbus_config *cfg)
> > > {
> > > - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
> > > - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> > > - V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > cfg->type = V4L2_MBUS_PARALLEL;
> > > + cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
> > > + V4L2_MBUS_MASTER |
> > > + V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> > > + V4L2_MBUS_DATA_ACTIVE_HIGH;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
> > > index 40512004afba..dfbc42675143 100644
> > > --- a/drivers/media/i2c/tc358743.c
> > > +++ b/drivers/media/i2c/tc358743.c
> > > @@ -1613,24 +1613,8 @@ static int tc358743_get_mbus_config(struct v4l2_subdev *sd,
> > > cfg->type = V4L2_MBUS_CSI2_DPHY;
> > >
> > > /* Support for non-continuous CSI-2 clock is missing in the driver */
> > > - cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> > > -
> > > - switch (state->csi_lanes_in_use) {
> > > - case 1:
> > > - cfg->flags |= V4L2_MBUS_CSI2_1_LANE;
> > > - break;
> > > - case 2:
> > > - cfg->flags |= V4L2_MBUS_CSI2_2_LANE;
> > > - break;
> > > - case 3:
> > > - cfg->flags |= V4L2_MBUS_CSI2_3_LANE;
> > > - break;
> > > - case 4:
> > > - cfg->flags |= V4L2_MBUS_CSI2_4_LANE;
> > > - break;
> > > - default:
> > > - return -EINVAL;
> > > - }
> > > + cfg->bus.mipi_csi2.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> > > + cfg->bus.mipi_csi2.num_data_lanes = state->csi_lanes_in_use;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> > > index 4b16ffcaef98..65472438444b 100644
> > > --- a/drivers/media/i2c/tvp5150.c
> > > +++ b/drivers/media/i2c/tvp5150.c
> > > @@ -1198,8 +1198,10 @@ static int tvp5150_get_mbus_config(struct v4l2_subdev *sd,
> > > struct tvp5150 *decoder = to_tvp5150(sd);
> > >
> > > cfg->type = decoder->mbus_type;
> > > - cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
> > > - | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
> > > + cfg->bus.parallel.flags = V4L2_MBUS_MASTER
> > > + | V4L2_MBUS_PCLK_SAMPLE_RISING
> > > + | V4L2_MBUS_FIELD_EVEN_LOW
> > > + | V4L2_MBUS_DATA_ACTIVE_HIGH;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
> > > index b5644cf37fe9..35145e3348f0 100644
> > > --- a/drivers/media/platform/pxa_camera.c
> > > +++ b/drivers/media/platform/pxa_camera.c
> > > @@ -1587,24 +1587,26 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev)
> > > * PXA does not support V4L2_MBUS_DATA_ACTIVE_LOW and the bus mastering
> > > * roles should match.
> > > */
> > > - if (cfg.flags != mbus_config) {
> > > + if (cfg.bus.parallel.flags != mbus_config) {
> > > unsigned int pxa_mbus_role = mbus_config & (V4L2_MBUS_MASTER |
> > > V4L2_MBUS_SLAVE);
> > > - if (pxa_mbus_role != (cfg.flags & (V4L2_MBUS_MASTER |
> > > - V4L2_MBUS_SLAVE))) {
> > > + unsigned int flags = cfg.bus.parallel.flags;
> > > +
> > > + if (pxa_mbus_role != (flags & (V4L2_MBUS_MASTER |
> > > + V4L2_MBUS_SLAVE))) {
> > > dev_err(pcdev_to_dev(pcdev),
> > > "Unsupported mbus configuration: bus mastering\n");
> > > return -EINVAL;
> > > }
> > >
> > > - if (cfg.flags & V4L2_MBUS_DATA_ACTIVE_LOW) {
> > > + if (flags & V4L2_MBUS_DATA_ACTIVE_LOW) {
> > > dev_err(pcdev_to_dev(pcdev),
> > > "Unsupported mbus configuration: DATA_ACTIVE_LOW\n");
> > > return -EINVAL;
> > > }
> > > }
> > >
> > > - pxa_camera_setup_cicr(pcdev, cfg.flags, pixfmt);
> > > + pxa_camera_setup_cicr(pcdev, cfg.bus.parallel.flags, pixfmt);
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > index 8c939cb3073d..cbac5801720b 100644
> > > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > @@ -603,7 +603,6 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
> > > unsigned int *lanes)
> > > {
> > > struct v4l2_mbus_config mbus_config = { 0 };
> > > - unsigned int num_lanes = UINT_MAX;
> > > int ret;
> > >
> > > *lanes = priv->lanes;
> > > @@ -626,23 +625,14 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
> > > return -EINVAL;
> > > }
> > >
> > > - if (mbus_config.flags & V4L2_MBUS_CSI2_1_LANE)
> > > - num_lanes = 1;
> > > - else if (mbus_config.flags & V4L2_MBUS_CSI2_2_LANE)
> > > - num_lanes = 2;
> > > - else if (mbus_config.flags & V4L2_MBUS_CSI2_3_LANE)
> > > - num_lanes = 3;
> > > - else if (mbus_config.flags & V4L2_MBUS_CSI2_4_LANE)
> > > - num_lanes = 4;
> > > -
> > > - if (num_lanes > priv->lanes) {
> > > + if (mbus_config.bus.mipi_csi2.num_data_lanes > priv->lanes) {
> > > dev_err(priv->dev,
> > > "Unsupported mbus config: too many data lanes %u\n",
> > > - num_lanes);
> > > + mbus_config.bus.mipi_csi2.num_data_lanes);
> > > return -EINVAL;
> > > }
> > >
> > > - *lanes = num_lanes;
> > > + *lanes = mbus_config.bus.mipi_csi2.num_data_lanes;
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> > > index bd7f156f2d52..b2b1f4dd41d7 100644
> > > --- a/drivers/staging/media/imx/imx-media-csi.c
> > > +++ b/drivers/staging/media/imx/imx-media-csi.c
> > > @@ -718,9 +718,10 @@ static int csi_setup(struct csi_priv *priv)
> > >
> > > /* compose mbus_config from the upstream endpoint */
> > > mbus_cfg.type = priv->upstream_ep.bus_type;
> > > - mbus_cfg.flags = is_parallel_bus(&priv->upstream_ep) ?
> > > - priv->upstream_ep.bus.parallel.flags :
> > > - priv->upstream_ep.bus.mipi_csi2.flags;
> > > + if (is_parallel_bus(&priv->upstream_ep))
> > > + mbus_cfg.bus.parallel = priv->upstream_ep.bus.parallel;
> > > + else
> > > + mbus_cfg.bus.mipi_csi2 = priv->upstream_ep.bus.mipi_csi2;
> > >
> > > if_fmt = *infmt;
> > > crop = priv->crop;
> > > diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
> > > index 558b256ac935..c4cb558a85c6 100644
> > > --- a/drivers/staging/media/imx/imx6-mipi-csi2.c
> > > +++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
> > > @@ -303,7 +303,6 @@ static void csi2ipu_gasket_init(struct csi2_dev *csi2)
> > > static int csi2_get_active_lanes(struct csi2_dev *csi2, unsigned int *lanes)
> > > {
> > > struct v4l2_mbus_config mbus_config = { 0 };
> > > - unsigned int num_lanes = UINT_MAX;
> > > int ret;
> > >
> > > *lanes = csi2->data_lanes;
> > > @@ -326,32 +325,14 @@ static int csi2_get_active_lanes(struct csi2_dev *csi2, unsigned int *lanes)
> > > return -EINVAL;
> > > }
> > >
> > > - switch (mbus_config.flags & V4L2_MBUS_CSI2_LANES) {
> > > - case V4L2_MBUS_CSI2_1_LANE:
> > > - num_lanes = 1;
> > > - break;
> > > - case V4L2_MBUS_CSI2_2_LANE:
> > > - num_lanes = 2;
> > > - break;
> > > - case V4L2_MBUS_CSI2_3_LANE:
> > > - num_lanes = 3;
> > > - break;
> > > - case V4L2_MBUS_CSI2_4_LANE:
> > > - num_lanes = 4;
> > > - break;
> > > - default:
> > > - num_lanes = csi2->data_lanes;
> > > - break;
> > > - }
> > > -
> > > - if (num_lanes > csi2->data_lanes) {
> > > + if (mbus_config.bus.mipi_csi2.num_data_lanes > csi2->data_lanes) {
> > > dev_err(csi2->dev,
> > > "Unsupported mbus config: too many data lanes %u\n",
> > > - num_lanes);
> > > + mbus_config.bus.mipi_csi2.num_data_lanes);
> > > return -EINVAL;
> > > }
> > >
> > > - *lanes = num_lanes;
> > > + *lanes = mbus_config.bus.mipi_csi2.num_data_lanes;
> > >
> > > return 0;
> > > }
> > > diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> > > index 9c4970fbd8ea..269aaf57ba32 100644
> > > --- a/include/media/v4l2-mediabus.h
> > > +++ b/include/media/v4l2-mediabus.h
> > > @@ -166,12 +166,26 @@ enum v4l2_mbus_type {
> > >
> > > /**
> > > * struct v4l2_mbus_config - media bus configuration
> > > - * @type: in: interface type
> > > - * @flags: in / out: configuration flags, depending on @type
> > > + * @type: interface type
> > > + * @bus: bus configuration data structure
> > > + * @bus.parallel: embedded &struct v4l2_mbus_config_parallel.
> > > + * Used if the bus is parallel or BT.656.
> > > + * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1.
> > > + * Used if the bus is MIPI Alliance's Camera Serial
> > > + * Interface version 1 (MIPI CSI1) or Standard
> > > + * Mobile Imaging Architecture's Compact Camera Port 2
> > > + * (SMIA CCP2).
> > > + * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2.
> > > + * Used if the bus is MIPI Alliance's Camera Serial
> > > + * Interface version 2 (MIPI CSI2).
> > > */
> > > struct v4l2_mbus_config {
> > > enum v4l2_mbus_type type;
> > > - unsigned int flags;
> > > + union {
> > > + struct v4l2_mbus_config_parallel parallel;
> > > + struct v4l2_mbus_config_mipi_csi1 mipi_csi1;
> > > + struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
> >
> > I wonder if we would be able to use a single structure for D-PHY and
> > C-PHY. The clock lane index does not make much sense for the latter,
> > but it was already there, so it can be changed on top in case it is
> > required
>
> I'm not sure to follow you here. CSI1 and CSI2 are not D-PHY versus
> C-PHY.
>
I meant if we will be able to correctly represent CSI-2 on C-PHY with
struct v4l2_mbus_config_mipi_csi2.
> > Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> >
> > > + } bus;
> > > };
> > >
> > > /**
>
> --
> Regards,
>
> Laurent Pinchart
