Re: [PATCH v1.1 8/8] media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Wed, Jan 05, 2022 at 10:15:58PM +0200, Laurent Pinchart wrote:
> MIPI CSI-2 continuous and non-continuous clock modes are mutually
> exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use
> V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only.
>

As continuous clock is the default configuration for CSI-2, wouldn't
it be easier to add a boolean clock_non_cont (or similar) to
v4l2_mbus_config_mipi_csi2 ?

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> Changes since v1:
>
> - Check all CSI2 flags in v4l2_fwnode_endpoint_parse_csi2_bus()
> ---
>  drivers/media/i2c/adv7180.c           | 3 +--
>  drivers/media/i2c/tc358743.c          | 6 +++---
>  drivers/media/v4l2-core/v4l2-fwnode.c | 6 ++----
>  include/media/v4l2-mediabus.h         | 3 +--
>  4 files changed, 7 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> index 3ff37a550810..4f5db195e66d 100644
> --- a/drivers/media/i2c/adv7180.c
> +++ b/drivers/media/i2c/adv7180.c
> @@ -785,8 +785,7 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd,
>  	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
>  		cfg->type = V4L2_MBUS_CSI2_DPHY;
>  		cfg->bus.mipi_csi2.num_data_lanes = 1;
> -		cfg->bus.mipi_csi2.flags =
> -				V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> +		cfg->bus.mipi_csi2.flags = 0;
>  	} else {
>  		/*
>  		 * The ADV7180 sensor supports BT.601/656 output modes.
> diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
> index dfbc42675143..e18b8947ad7e 100644
> --- a/drivers/media/i2c/tc358743.c
> +++ b/drivers/media/i2c/tc358743.c
> @@ -717,7 +717,7 @@ static void tc358743_set_csi(struct v4l2_subdev *sd)
>  			((lanes > 3) ? MASK_D3M_HSTXVREGEN : 0x0));
>
>  	i2c_wr32(sd, TXOPTIONCNTRL, (state->bus.flags &
> -		 V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) ? MASK_CONTCLKMODE : 0);
> +		 V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK) ? 0 : MASK_CONTCLKMODE);
>  	i2c_wr32(sd, STARTCNTRL, MASK_START);
>  	i2c_wr32(sd, CSI_START, MASK_STRT);
>
> @@ -1613,7 +1613,7 @@ static int tc358743_get_mbus_config(struct v4l2_subdev *sd,
>  	cfg->type = V4L2_MBUS_CSI2_DPHY;
>
>  	/* Support for non-continuous CSI-2 clock is missing in the driver */
> -	cfg->bus.mipi_csi2.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> +	cfg->bus.mipi_csi2.flags = 0;
>  	cfg->bus.mipi_csi2.num_data_lanes = state->csi_lanes_in_use;
>
>  	return 0;
> @@ -2039,7 +2039,7 @@ static int tc358743_probe(struct i2c_client *client)
>  	/* platform data */
>  	if (pdata) {
>  		state->pdata = *pdata;
> -		state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
> +		state->bus.flags = 0;
>  	} else {
>  		err = tc358743_probe_of(state);
>  		if (err == -ENODEV)
> diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
> index 9ff3ebb230e7..71dcc9a96535 100644
> --- a/drivers/media/v4l2-core/v4l2-fwnode.c
> +++ b/drivers/media/v4l2-core/v4l2-fwnode.c
> @@ -207,13 +207,11 @@ static int v4l2_fwnode_endpoint_parse_csi2_bus(struct fwnode_handle *fwnode,
>  	if (fwnode_property_present(fwnode, "clock-noncontinuous")) {
>  		flags |= V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
>  		pr_debug("non-continuous clock\n");
> -	} else {
> -		flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
>  	}
>
>  	if (bus_type == V4L2_MBUS_CSI2_DPHY ||
> -	    bus_type == V4L2_MBUS_CSI2_CPHY || lanes_used ||
> -	    have_clk_lane || (flags & ~V4L2_MBUS_CSI2_CONTINUOUS_CLOCK)) {
> +	    bus_type == V4L2_MBUS_CSI2_CPHY ||
> +	    lanes_used || have_clk_lane || flags) {
>  		/* Only D-PHY has a clock lane. */
>  		unsigned int dfl_data_lane_index =
>  			bus_type == V4L2_MBUS_CSI2_DPHY;
> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> index c6626a22b394..e0db3bcff9ed 100644
> --- a/include/media/v4l2-mediabus.h
> +++ b/include/media/v4l2-mediabus.h
> @@ -68,8 +68,7 @@
>
>  /* Serial flags */
>  /* Clock non-continuous mode support. */
> -#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
> -#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)
> +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(0)
>
>  #define V4L2_MBUS_CSI2_MAX_DATA_LANES		8
>
>
> base-commit: 68b9bcc8a534cd11fe55f8bc82f948aae7d81b3c
> prerequisite-patch-id: cc085f7de462ead19772e3f64e1b1d13bb92d5b7
> prerequisite-patch-id: d6943d1780603964a753d571e26bad98b4954a8a
> prerequisite-patch-id: c63eaa2a61aeea6d4be238644f1324f0170d981c
> prerequisite-patch-id: 797385e385b3f71f0bafe7eb8e712d52628c23d7
> prerequisite-patch-id: 2f7fe0901f79ac1d445e443b5d3ee7ab9ae41525
> prerequisite-patch-id: 70ddd068308b5758872349ec6e0f03e8c9427dc0
> prerequisite-patch-id: 987cc8f39cb63badf2d6ceba946deffafba9a249
> --
> Regards,
>
> Laurent Pinchart
>



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux