Re: [PATCH v2 10/13] media: rcar-csi2: Move format to subdev state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 23, 2022 at 04:19:16PM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
> 
> Thank you for the patch.
> 
> On Sun, Oct 17, 2021 at 08:24:46PM +0200, Jacopo Mondi wrote:
> > Move format handling to the v4l2_subdev state and store it per
> > (pad, stream) combination.
> > 
> > Now that the image format is stored in the subdev state, it can be
> > accessed through v4l2_subdev_get_fmt() instead of open-coding it.
> > 
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  drivers/media/platform/rcar-vin/rcar-csi2.c | 50 ++++++++++++---------
> >  1 file changed, 29 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index 451a6da26e03..b60845b1e563 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -722,34 +722,42 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> >  				struct v4l2_subdev_state *sd_state,
> >  				struct v4l2_subdev_format *format)
> >  {
> > -	struct rcar_csi2 *priv = sd_to_csi2(sd);
> > -	struct v4l2_mbus_framefmt *framefmt;
> > +	struct v4l2_mbus_framefmt *fmt;
> > +	struct v4l2_subdev_state *state;
> > +	int ret = 0;
> >  
> >  	if (!rcsi2_code_to_fmt(format->format.code))
> >  		format->format.code = rcar_csi2_formats[0].code;
> >  
> > -	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -		priv->mf = format->format;
> > -	} else {
> > -		framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > -		*framefmt = format->format;
> > -	}
> > +	/*
> > +	 * Format is propagated from sink streams to source streams, so
> > +	 * disallow setting format on the source pads.
> > +	 */
> > +	if (format->pad > RCAR_CSI2_SINK)
> > +		return -EINVAL;
> 
> You should return v4l2_subdev_get_fmt() instead.
> 
> >  
> > -	return 0;
> > -}
> > +	state = v4l2_subdev_validate_and_lock_state(sd, sd_state);
> 
> With v10 of the streams series I think you can use
> v4l2_subdev_lock_state().
> 
> > +	fmt = v4l2_state_get_stream_format(state, format->pad,
> > +					   format->stream);
> > +	if (!fmt) {
> > +		ret = -EINVAL;
> > +		goto out;
> > +	}
> > +	*fmt = format->format;
> 
> I would get the pointers to both formats before updating any of them, to
> avoid a partial update in case of error:
> 
> 	sink_fmt = v4l2_state_get_stream_format(state, format->pad,
> 						format->stream);
> 	source_fmt = v4l2_state_get_opposite_stream_format(state, format->pad,
> 							   format->stream);
> 	if (!sink_fmt || !source_fmt) {
> 		ret = -EINVAL;
> 		goto out;
> 	}
> 
> 	*sink_fmt = format->format;
> 	*source_fmt = format->format;
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Actually, the rest of the driver still uses priv->mf, so this patch will
cause a breakage. You can squash it with 11/13.

> >  
> > -static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
> > -				struct v4l2_subdev_state *sd_state,
> > -				struct v4l2_subdev_format *format)
> > -{
> > -	struct rcar_csi2 *priv = sd_to_csi2(sd);
> > +	/* Propagate format to the other end of the route. */
> > +	fmt = v4l2_state_get_opposite_stream_format(state, format->pad,
> > +						    format->stream);
> > +	if (!fmt) {
> > +		ret = -EINVAL;
> > +		goto out;
> > +	}
> > +	*fmt = format->format;
> >  
> > -	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > -		format->format = priv->mf;
> > -	else
> > -		format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0);
> > +out:
> > +	v4l2_subdev_unlock_state(state);
> >  
> > -	return 0;
> > +	return ret;
> >  }
> >  
> >  static int _rcsi2_set_routing(struct v4l2_subdev *sd,
> > @@ -829,7 +837,7 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
> >  static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
> >  	.init_cfg = rcsi2_init_cfg,
> >  	.set_fmt = rcsi2_set_pad_format,
> > -	.get_fmt = rcsi2_get_pad_format,
> > +	.get_fmt = v4l2_subdev_get_fmt,
> >  	.set_routing = rcsi2_set_routing,
> >  };
> >  

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux