Re: [RFC PATCH v2 1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block

[Jacopo Mondi <jacopo@xxxxxxxxxx>]

Hi Prabhakar

On Fri, Jan 21, 2022 at 01:05:40AM +0000, Lad Prabhakar wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> Hi Geert/All,
>
> vclk and pclk clocks are shared with CRU both CSI and CRU driver are using
> pm_runtime. pclk clock is necessary for register access where as vclk clock
> is only used for calculations. So would you suggest passing vclk as part of
> clocks (as currently implemented) or pass the vclk clock rate as a dt property.
>
> Cheers,
> Prabhakar
>
> v1->v2
> * New patch
> ---
>  .../bindings/media/renesas,rzg2l-csi2.yaml    | 151 ++++++++++++++++++
>  1 file changed, 151 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> new file mode 100644
> index 000000000000..bf907768a157
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -0,0 +1,151 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> +
> +description:
> +  The RZ/G2L CSI-2 receiver device provides MIPI CSI-2 capabilities for the
> +  Renesas RZ/G2L family of devices. MIPI CSI-2 is part of the CRU block which
> +  is used in conjunction with the Image Processing module, which provides the
> +  video capture capabilities.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-csi2     # RZ/G2{L,LC}
> +          - const: renesas,rzg2l-csi2

As per Rob's comment on the CRU bindings, you can remove oneOf:

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    items:
> +      - const: csi2_link

Can this be just

  interrupt-names:
    const: csi2_link
?

(I've run dt_binding_check and it does not complain)

> +
> +  clocks:
> +    items:
> +      - description: Internal clock for connecting CRU and MIPI
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: vclk
> +      - const: pclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_CMN_RSTB reset terminal
> +
> +  reset-names:
> +    items:
> +      - const: cmn-rstb

Here and above, is items: needed for a single entry ?
(again, dt_binding_check does not complain if I remove it)

> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  maximum: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node, Image Processing block connected to the CSI-2 receiver.

Isn't the next processing block the CRU ? IOW, isn't this driver the
CSI-2 receiver ?

> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    csi20: csi2@10830400 {
> +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> +            reg = <0x10830400 0xfc00>;
> +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> +            clock-names = "sysclk", "vclk", "pclk";
> +            power-domains = <&cpg>;
> +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> +            reset-names = "cmn-rstb";
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                            reg = <0>;
> +
> +                            csi2_in: endpoint {
> +                                    clock-lanes = <0>;
> +                                    data-lanes = <1 2>;
> +                                    remote-endpoint = <&ov5645_ep>;
> +                            };
> +                    };
> +
> +                    port@1 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <1>;
> +
> +                            csi2cru: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint = <&crucsi2>;
> +                            };
> +                    };
> +            };
> +    };
> --
> 2.17.1
>