Linux Renesas SOC
[Prev Page][Next Page]
- Re: [PATCH] i2c: mux: demux-pinctrl: check initial mux selection, too
- [PATCH] ARM: shmobile: defconfig: Supplement DTB with ATAG information
- Re: [PATCH v2 3/4] dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
- From: Krzysztof Kozlowski
- [PATCH v2 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- [PATCH v2 3/4] dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
- [PATCH v2 2/4] dt-bindings: vendor-prefixes: Add Yuridenki-Shokai Co. Ltd.
- [PATCH v2 0/4] Add support Yuridenki-Shokai Kakip board
- [PATCH v2 1/4] dt-bindings: soc: renesas: Document Renesas RZ/V2H SoC variants
- Re: [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH] arm64: dts: renesas: r8a77970: Align GPIO hog name with bindings
- [PATCH] arm64: dts: renesas: r8a77970: Align GPIO hog name with bindings
- From: Krzysztof Kozlowski
- [geert-renesas-drivers:master] BUILD REGRESSION d088502a519fb7834bf6e34cb4e531c1e8113bd1
- [PATCH] i2c: testunit: on errors, repeat NACK until STOP
- [PATCH 2/2] arm64: dts: renesas: r8a779h0: Add VSPX instance
- [PATCH 1/2] arm64: dts: renesas: r8a779h0: Add FCPVX instance
- [PATCH 0/2] arm64: dts: renesas: r8a779h0: Add FCPVX and VSPX
- [PATCH 0/2] clk: renesas: r8a779h0: Add FCPVX and VSPX clocks
- [PATCH 2/2] clk: renesas: r8a779h0: Add VSPX clock
- [PATCH 1/2] clk: renesas: r8a779h0: Add FCPVX clock
- RE: [PATCH 5/5] arm64: dts: renesas: r9a09g047e57-smarc: Enable watchdog
- RE: [PATCH 3/5] watchdog: Make RZV2HWDT driver depend on ARCH_R9A09G47
- Re: [PATCH 2/6] thermal: of: Export non-devres helper to register/unregister thermal zone
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH 3/5] watchdog: Make RZV2HWDT driver depend on ARCH_R9A09G47
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2] clk: renesas: r8a08g045: Check the source of the CPU PLL settings
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH] i2c: rcar: fix NACK handling when being a target
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [GIT PULL] pinctrl: renesas: Updates for v6.14 (take three)
- Re: [PATCH v5] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region()
- From: Krzysztof Wilczyński
- Re: [PATCH 2/2] of: Warn when of_property_read_bool() is used on non-boolean properties
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH 0/5] Add support for RZ/G3E WDT
- [PATCH 5/5] arm64: dts: renesas: r9a09g047e57-smarc: Enable watchdog
- [PATCH 4/5] arm64: dts: renesas: r9a09g047: Add WDT1-WDT3 nodes
- [PATCH 3/5] watchdog: Make RZV2HWDT driver depend on ARCH_R9A09G47
- [PATCH 2/5] clk: renesas: r9a09g047: Add WDT clocks/resets
- [PATCH 1/5] dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [geert-renesas-drivers:renesas-clk-for-v6.15] BUILD SUCCESS e2270df8cf29238c74d207c99b394dbe61cdf410
- [geert-renesas-drivers:renesas-pinctrl-for-v6.14] BUILD SUCCESS accabfaae0940f9427c782bfee7340ce4c15151c
- Re: [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- From: Krzysztof Kozlowski
- [GIT PULL] pinctrl: renesas: Updates for v6.14 (take three)
- Re: [PATCH 2/2] media: v4l: fwnode: Parse CSI-2 C-PHY line-orders like bus-type
- Re: 回复: [PATCH] pmdomain: Use str_enable_disable-like helpers
- From: Krzysztof Kozlowski
- Re: [PATCH] pmdomain: Use str_enable_disable-like helpers
- [PATCH] i2c: add kdoc for the new debugfs entry of clients
- [PATCH] i2c: mux: demux-pinctrl: check initial mux selection, too
- [PATCH] ASoC: renesas: rz-ssi: Clean up on error in probe()
- Re: [PATCH v2 11/25] drm/loongson: Compute dumb-buffer sizes with drm_mode_size_dumb()
- 回复: [PATCH] pmdomain: Use str_enable_disable-like helpers
- [geert-renesas-drivers:master 17/54] drivers/gpu/drm/bridge/lontium-lt9611.c:1147:15: error: 'struct lt9611' has no member named 'audio_pdev'
- [geert-renesas-drivers:master 17/54] drivers/gpu/drm/bridge/lontium-lt9611.c:1147:10: error: no member named 'audio_pdev' in 'struct lt9611'
- Re: [PATCH v3 4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property
- [PATCH] pmdomain: Use str_enable_disable-like helpers
- From: Krzysztof Kozlowski
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH 2/2] of: Warn when of_property_read_bool() is used on non-boolean properties
- Re: [PATCH 2/2] of: Warn when of_property_read_bool() is used on non-boolean properties
- Re: [PATCH 2/2] of: Warn when of_property_read_bool() is used on non-boolean properties
- [PATCH 0/3] clk: renesas: gen4: Add ISP core clocks
- [PATCH 3/3] clk: renesas: r8a779h0: Add ISP core clocks
- [PATCH 2/3] clk: renesas: r8a779g0: Add ISP core clocks
- [PATCH 1/3] clk: renesas: r8a779a0: Add ISP core clocks
- renesas-drivers-2025-01-14-v6.13-rc7
- Re: [PATCH v2 15/25] drm/omapdrm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH 0/4] Add support Yuridenki-Shokai Kakip board
- Re: [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- Re: [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- Re: [PATCH 3/4] dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
- Re: [PATCH v6 00/10] i2c: riic: Add support for I2C bus recovery, along with driver cleanup and improvements
- Re: [GIT PULL] pinctrl: renesas: Updates for v6.14 (take two)
- Re: [PATCH 1/2] i2c: add core-managed per-client directory in debugfs
- RE: [PATCH v3 5/6] watchdog: rzv2h_wdt: Add support to retrieve the bootstatus information
- Re: [PATCH v3 5/6] watchdog: rzv2h_wdt: Add support to retrieve the bootstatus information
- Re: [PATCH v6 00/10] i2c: riic: Add support for I2C bus recovery, along with driver cleanup and improvements
- Re: [PATCH v6 08/10] i2c: riic: Use predefined macro and simplify clock tick calculation
- RE: [PATCH v3 5/6] watchdog: rzv2h_wdt: Add support to retrieve the bootstatus information
- [geert-renesas-devel:master] BUILD SUCCESS 04163f0e2c93ba32550d50b9c0c9fb90cd0feec4
- [geert-renesas-devel:renesas-arm-soc-for-v6.15] BUILD SUCCESS c502a992d98e34b9cd74b91c2835b0b46de2e5ff
- [geert-renesas-devel:renesas-dts-for-v6.15] BUILD SUCCESS 7e5cb604bedbb494c4c764b5d8435b9c598ba318
- Re: [PATCH v6 00/10] i2c: riic: Add support for I2C bus recovery, along with driver cleanup and improvements
- RE: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- RE: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH] dt-bindings: Correct indentation and style in DTS example
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- [PATCH v6 10/10] i2c: riic: Implement bus recovery
- [PATCH v6 09/10] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- [PATCH v6 06/10] i2c: riic: Make use of devres helper to request deasserted reset line
- [PATCH v6 08/10] i2c: riic: Use predefined macro and simplify clock tick calculation
- [PATCH v6 07/10] i2c: riic: Mark riic_irqs array as const
- [PATCH v6 05/10] i2c: riic: Use GENMASK() macro for bitmask definitions
- [PATCH v6 04/10] i2c: riic: Use BIT macro consistently
- [PATCH v6 02/10] i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
- [PATCH v6 03/10] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- [PATCH v6 01/10] i2c: riic: Introduce a separate variable for IRQ
- [PATCH v6 00/10] i2c: riic: Add support for I2C bus recovery, along with driver cleanup and improvements
- RE: [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- [PATCH v3 6/6] arm64: dts: renesas: r9a09g057: Add `renesas,syscon-cpg-error-rst` property to WDT node
- [PATCH v3 5/6] watchdog: rzv2h_wdt: Add support to retrieve the bootstatus information
- [PATCH v3 4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property
- [PATCH v3 3/6] arm64: dts: renesas: r9a09g057: Add `syscon` compatible for CPG node
- [PATCH v3 2/6] arm64: dts: renesas: r9a09g047: Add `syscon` compatible for CPG node
- [PATCH v3 1/6] dt-bindings: clock: rzv2h-cpg: Add syscon compatible for CPG block
- [PATCH v3 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH 0/4] Add support Yuridenki-Shokai Kakip board
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH v2] pinctrl: renesas: rzg2l: Update PFC_MASK to align with RZ/V2H requirements
- Re: [PATCH v2 13/25] drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v4 4/9] i2c: riic: Use BIT macro consistently
- Re: [PATCH v2 02/25] drm/dumb-buffers: Provide helper to set pitch and size
- Re: [PATCH v4 0/5] i3c: introduce and use generic parity helper
- Re: [PATCH] i3c: fix kdoc parameter description for module_i3c_i2c_driver()
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH v5] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- Re: [PATCH v4 8/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- Re: [PATCH v4 5/9] i2c: riic: Use GENMASK() macro for bitmask definitions
- Re: [PATCH v4 4/9] i2c: riic: Use BIT macro consistently
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- From: Krzysztof Kozlowski
- Re: [PATCH 3/4] dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
- From: Krzysztof Kozlowski
- Re: [PATCH 2/4] dt-bindings: vendor-prefixes: Add Yuridenki-Shokai Co. Ltd.
- From: Krzysztof Kozlowski
- Re: [PATCH 1/4] dt-bindings: soc: renesas: Document Renesas RZ/V2H SoC variants
- From: Krzysztof Kozlowski
- [PATCH 4/4] arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board
- [PATCH 3/4] dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
- [PATCH 2/4] dt-bindings: vendor-prefixes: Add Yuridenki-Shokai Co. Ltd.
- [PATCH 1/4] dt-bindings: soc: renesas: Document Renesas RZ/V2H SoC variants
- [PATCH 0/4] Add support Yuridenki-Shokai Kakip board
- Re: [net PATCH] net: ravb: Fix max TX frame size for RZ/V2M
- From: patchwork-bot+netdevbpf
- [PATCH v2] pinctrl: renesas: rzg2l: Update PFC_MASK to align with RZ/V2H requirements
- Re: [PATCH v2 22/25] drm/vmwgfx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- Re: [PATCH] clk: renesas: r8a08g045: Check the source of the CPU PLL settings
- Re: [PATCH 1/6] clk: renesas: r9a08g045: Add clocks, resets and power domain support for the TSU IP
- Re: [PATCH] arm64: dts: renesas: gray-hawk-single: Restore sort order
- Re: [PATCH v2 02/25] drm/dumb-buffers: Provide helper to set pitch and size
- [PATCH] arm64: dts: renesas: gray-hawk-single: Restore sort order
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add FCPVX instances
- Re: [PATCH] pinctrl: renesas: rzg2l: Use configurable PFC mask
- Re: [PATCH] pinctrl: renesas: rzg2l: Use configurable PFC mask
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add FCPVX instances
- Re: [PATCH] pinctrl: renesas: rzg2l: Use configurable PFC mask
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add FCPVX instances
- Re: [PATCH 2/2] arm64: dts: renesas: r8a779a0: Add VSPX instances
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add FCPVX instances
- Re: [PATCH] clk: renesas: r8a779a0: Add FCPVX clocks
- Re: [PATCH] clk: renesas: rzg2l-cpg: Refactor Runtime PM clock validation
- Re: [PATCH v5] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH v2 10/25] drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v5] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH v2 19/25] drm/rockchip: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v5] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH] rtc: use boolean values with device_init_wakeup()
- Re: [net PATCH] net: ravb: Fix max TX frame size for RZ/V2M
- Re: [PATCH 2/6] thermal: of: Export non-devres helper to register/unregister thermal zone
- Re: [PATCH v2 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [net PATCH] net: ravb: Fix max TX frame size for RZ/V2M
- Re: [PATCH v2 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH v2 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH 2/2] hwmon: (isl28022) Use per-client debugfs entry
- Re: [PATCH 1/2] i2c: add core-managed per-client directory in debugfs
- [PATCH v2 25/25] drm/xlnx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 22/25] drm/vmwgfx: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 18/25] drm/renesas/rz-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 17/25] drm/renesas/rcar-du: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 23/25] drm/xe: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 16/25] drm/qxl: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 15/25] drm/omapdrm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 24/25] drm/xen: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 20/25] drm/tegra: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 21/25] drm/virtio: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 12/25] drm/mediatek: Compute dumb-buffer sizes with drm_mode_size_dumb()
- Re: [PATCH] arm64: dts: renesas: r8a779g0: Fix graph_child_address warnings from capture pipeline
- [PATCH v2 11/25] drm/loongson: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 19/25] drm/rockchip: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 10/25] drm/imx/ipuv3: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 13/25] drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 07/25] drm/exynos: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 14/25] drm/nouveau: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 08/25] drm/gma500: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 09/25] drm/hibmc: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 04/25] drm/gem-shmem: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 03/25] drm/gem-dma: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 06/25] drm/armada: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 05/25] drm/gem-vram: Compute dumb-buffer sizes with drm_mode_size_dumb()
- [PATCH v2 02/25] drm/dumb-buffers: Provide helper to set pitch and size
- [PATCH v2 01/25] drm/dumb-buffers: Sanitize output on errors
- [PATCH v2 00/25] drm/dumb-buffers: Fix and improve buffer-size calculation
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- [PATCH 2/2] arm64: dts: renesas: r8a779a0: Add VSPX instances
- [PATCH 1/2] arm64: dts: renesas: r8a779a0: Add FCPVX instances
- [PATCH 0/2] arm64: dts: renesas: r8a779a0: Describe FCPVX and VSPX
- [PATCH] clk: renesas: r8a779a0: Add FCPVX clocks
- Re: [net PATCH] net: ravb: Fix max TX frame size for RZ/V2M
- Re: [PATCH v2 2/3] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- [PATCH 1/2] i2c: add core-managed per-client directory in debugfs
- [PATCH 2/2] hwmon: (isl28022) Use per-client debugfs entry
- [PATCH 0/2] i2c: core-managed per-client directory in debugfs with example
- [net PATCH] net: ravb: Fix max TX frame size for RZ/V2M
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- From: AngeloGioacchino Del Regno
- Re: [PATCH v4 8/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH v4 8/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH v4 7/9] i2c: riic: Mark riic_irqs array as const
- Re: [PATCH v4 6/9] i2c: riic: Make use of devres helper to request deasserted reset line
- RE: [PATCH v23 3/4] pwm: Add support for RZ/G2L GPT
- Re: [PATCH] dt-bindings: Correct indentation and style in DTS example
- Re: [PATCH v23 3/4] pwm: Add support for RZ/G2L GPT
- Re: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- [PATCH v5] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region()
- Re: [PATCH 3/6] dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: Correct indentation and style in DTS example
- Re: [PATCH v4 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- Re: [PATCH] ASoC: renesas: rz-ssi: Add a check for negative sample_space
- RE: [PATCH v23 3/4] pwm: Add support for RZ/G2L GPT
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- Re: [PATCH v4 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- Re: [PATCH] dt-bindings: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: ufs: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH v4 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- RE: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- RE: [PATCH] ASoC: renesas: rz-ssi: Add a check for negative sample_space
- Re: [PATCH] ASoC: renesas: rz-ssi: Add a check for negative sample_space
- RE: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- RE: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] dt-bindings: timer: Correct indentation and style in DTS example
- [PATCH] ASoC: renesas: rz-ssi: Add a check for negative sample_space
- Re: [PATCH v4 0/5] i3c: introduce and use generic parity helper
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- From: Benjamin Bara - SKIDATA
- [geert-renesas-drivers:renesas-clk-for-v6.14] BUILD SUCCESS e91609f1c3b0ce06d80b1b3bd0e6b942782be016
- Re: Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- From: Martin Blumenstingl
- Re: [GIT PULL] clk: renesas: Updates for v6.14 (take two)
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH v2] drm/bridge: ti-sn65dsi86: Fix multiple instances
- Re: [PATCH v2] drm/bridge: ti-sn65dsi86: Fix multiple instances
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- [GIT PULL] clk: renesas: Updates for v6.14 (take two)
- [PATCH 1/2] arm64: dts: renesas: r8a779h0: Remove address- and size-cells from AVB[0-2]
- [PATCH 2/2] arm64: dts: renesas: gray-hawk-single: Describe AVB1 and AVB2
- [PATCH 0/2] arm64: dts: renesas: gray-hawk-single: Describe Marvell 88Q2110 PHYs
- Re: [PATCH/RFC] ARM: shmobile: rcar-gen2: Remove CMA reservation code
- [PATCH v4] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] dt-bindings: timer: Correct indentation and style in DTS example
- [PATCH v3] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- Re: [PATCH v3] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- [PATCH] dt-bindings: Correct indentation and style in DTS example
- From: Krzysztof Kozlowski
- [geert-renesas-devel:next] BUILD SUCCESS 14af1e5de568ac5537df06b38e47fd19cf49c38e
- [geert-renesas-devel:renesas-dts-for-v6.14] BUILD SUCCESS c357e2295b7880b1d9d365c3389f06ef2eb464d0
- [PATCH] dt-bindings: timer: Correct indentation and style in DTS example
- From: Krzysztof Kozlowski
- [PATCH] dt-bindings: ufs: Correct indentation and style in DTS example
- From: Krzysztof Kozlowski
- [PATCH] dt-bindings: usb: Correct indentation and style in DTS example
- From: Krzysztof Kozlowski
- Re: [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- From: AngeloGioacchino Del Regno
- [PATCH] dt-bindings: display: Correct indentation and style in DTS example
- From: Krzysztof Kozlowski
- RE: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- RE: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- RE: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- RE: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH/RFC] ARM: shmobile: rcar-gen2: Remove CMA reservation code
- [PATCH/RFC] ARM: shmobile: rcar-gen2: Remove CMA reservation code
- RE: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- RE: [PATCH v4 1/7] dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
- RE: [PATCH v4 2/7] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
- [PATCH] pinctrl: renesas: rzg2l: Use configurable PFC mask
- Re: [PATCH 2/2] media: v4l: fwnode: Parse CSI-2 C-PHY line-orders like bus-type
- Re: [PATCH 2/2] media: v4l: fwnode: Parse CSI-2 C-PHY line-orders like bus-type
- [geert-renesas-devel:master] BUILD SUCCESS f4592015c1a994f1a92fa984bd008924e88f6c3a
- [PATCH v4 5/5] i3c: cdns: use parity8 helper instead of open coding it
- [PATCH v4 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- [PATCH v4 0/5] i3c: introduce and use generic parity helper
- [PATCH v4 1/5] bitops: add generic parity calculation for u8
- [PATCH v4 3/5] i3c: dw: use parity8 helper instead of open coding it
- [PATCH v4 2/5] hwmon: (spd5118) Use generic parity calculation
- [PATCH] dt-bindings: clock: renesas,r9a08g045-vbattb: Fix include guard
- Re: [PATCH 2/2] media: v4l: fwnode: Parse CSI-2 C-PHY line-orders like bus-type
- Re: [PATCH v2] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH] clk: renesas: r9a07g044: Add clock and reset entry for DRP-AI
- Re: [PATCH] clk: renesas: rzg2l-cpg: Refactor Runtime PM clock validation
- [PATCH v2] clk: renesas: r9a07g044: Add clock and reset entry for DRP-AI
- Re: [PATCH] clk: renesas: r9a07g044: Add clock and reset entry for DRP-AI
- Re: [PATCH v3] ASoC: dt-bindings: renesas,rsnd: remove post-init-providers property
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- [GIT PULL] pinctrl: renesas: Updates for v6.14 (take two)
- [GIT PULL] Renesas DTS updates for v6.14 (take two)
- Re: [PATCH v2] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH v3 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH] arm64: dts: renesas: white-hawk-csi-dsi: Define numerical CSI-2 data line orders
- Re: [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- RE: [PATCH] media: rcar_drif: Fix an OF node leak in rcar_drif_bond_enabled()
- [PATCH] arm64: dts: renesas: white-hawk-csi-dsi: Define numerical CSI-2 data line orders
- Re: [PATCH] media: rcar_drif: Fix an OF node leak in rcar_drif_bond_enabled()
- Re: [PATCH v2] vmstat: disable vmstat_work on vmstat_cpu_down_prep()
- Re: [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- Re: [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- [PATCH v3 2/5] hwmon: (spd5118) Use generic parity calculation
- [PATCH v3 5/5] i3c: cdns: use parity8 helper instead of open coding it
- [PATCH v3 1/5] bitops: add generic parity calculation for u8
- [PATCH v3 4/5] i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
- [PATCH v3 0/5] i3c: introduce and use generic parity helper
- [PATCH v3 3/5] i3c: dw: use parity8 helper instead of open coding it
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH] clk: renesas: r9a07g044: Add clock and reset entry for DRP-AI
- Re: [PATCH v2] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- From: Manivannan Sadhasivam
- [PATCH] media: rcar_drif: Fix an OF node leak in rcar_drif_bond_enabled()
- Re: [PATCH RFT v2 0/5] i3c: introduce and use generic parity helper
- [PATCH v2] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH RFT v2 0/5] i3c: introduce and use generic parity helper
- [PATCH 2/2] media: v4l: fwnode: Parse CSI-2 C-PHY line-orders like bus-type
- [PATCH 1/2] media: v4l: fwnode: Add definitions for CSI-2 C-PHY line-orders
- [PATCH 0/2] media: v4l: fwnode: Improve line-orders parsing
- [PATCH] clk: renesas: r9a07g044: Add clock and reset entry for DRP-AI
- [geert-renesas-devel:renesas-dts-for-v6.14] BUILD SUCCESS 43938ef238451458a9dfaf8820f02aac36f59b3c
- [geert-renesas-devel:next] BUILD SUCCESS 42263f9226540847913801b22aa0b8ce7f512005
- [geert-renesas-drivers:renesas-r9a09g047-dt-binding-defs] BUILD SUCCESS 5c7fb203d0dbfbfeed51991a4f98499b245634a7
- [geert-renesas-devel:master] BUILD SUCCESS d06f78c1ea551227be2b1355974887c29fa4e7b5
- [geert-renesas-drivers:renesas-r9a09g057-dt-binding-defs] BUILD SUCCESS 3e4863d24818a41db42b4f2680715f204657839e
- Re: [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH v2 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- Re: [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- [geert-renesas-drivers:renesas-clk-for-v6.14] BUILD SUCCESS 75e050951f4fa943d13e006d477db5314644d30c
- Re: [PATCH] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- [geert-renesas-drivers:renesas-pinctrl-for-v6.14] BUILD SUCCESS 829356da700bbe07e13b4403997bf8c5aac64660
- Re: [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- [PATCH] PCI: rcar-ep: Fix the issue of the name parameter when calling devm_request_mem_region
- Re: [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- Re: [PATCH RFT v2 0/5] i3c: introduce and use generic parity helper
- Re: [PATCH RFT v2 0/5] i3c: introduce and use generic parity helper
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH v2 1/4] dt-bindings: soc: renesas: Add RZ/G3E variant SYS bindings
- Re: [PATCH v4 7/7] arm64: dts: renesas: r9a09g047: Add scif pincontrol
- Re: [PATCH v4 6/7] arm64: dts: renesas: r9a09g047: Add pincontrol node
- Re: [PATCH v4 5/7] arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
- Re: [PATCH v4 4/7] pinctrl: renesas: rzg2l: Add support for RZ/G3E SoC
- Re: [PATCH v4 3/7] pinctrl: renesas: rzg2l: Update r9a09g057_variable_pin_cfg table
- Re: [PATCH v4 2/7] dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
- Re: [PATCH v4 1/7] dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
- Re: [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- [PATCH] clk: renesas: r8a08g045: Check the source of the CPU PLL settings
- [PATCH 5/6] arm64: dts: renesas: r9a08g045: Add TSU node
- [PATCH 6/6] arm64: defconfig: Enable RZ/G3S thermal
- [PATCH 4/6] thermal: renesas: rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
- [PATCH 3/6] dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
- [PATCH 2/6] thermal: of: Export non-devres helper to register/unregister thermal zone
- [PATCH 1/6] clk: renesas: r9a08g045: Add clocks, resets and power domain support for the TSU IP
- [PATCH 0/6] thermal: renesas: Add support for RZ/G3S
- Re: [PATCH v4 9/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v4 9/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v3 6/6] clk: renesas: r9a09g057: Add clock and reset entries for GIC
- Re: [PATCH v3 5/6] clk: renesas: r9a09g057: Add reset entry for SYS
- Re: [PATCH v4 8/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH 0/2] iio: rzg2l_adc: Cleanups for rzg2l_adc driver
- [PATCH 2/2] iio: adc: rzg2l: Cleanup suspend/resume path
- [PATCH 0/2] iio: rzg2l_adc: Cleanups for rzg2l_adc driver
- [PATCH 1/2] iio: adc: rzg2l_adc: Drop devm_pm_runtime_enable()
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Re: [PATCH v4 1/9] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
- Re: [PATCH v4 1/9] i2c: riic: Introduce a separate variable for IRQ
- Re: [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- [PATCH v4 9/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- [PATCH v4 8/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- [PATCH v4 7/9] i2c: riic: Mark riic_irqs array as const
- [PATCH v4 6/9] i2c: riic: Make use of devres helper to request deasserted reset line
- [PATCH v4 5/9] i2c: riic: Use GENMASK() macro for bitmask definitions
- [PATCH v4 4/9] i2c: riic: Use BIT macro consistently
- [PATCH v4 3/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- [PATCH v4 2/9] i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
- [PATCH v4 1/9] i2c: riic: Introduce a separate variable for IRQ
- [PATCH v4 0/9] i2c: riic: driver cleanup and improvements
- Re: [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v2 4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property
- Re: [PATCH v2 4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property
- Re: [PATCH v2 1/6] dt-bindings: clock: rzv2h-cpg: Add syscon compatible for CPG block
- Re: [PATCH v2 2/4] soc: renesas: rz-sysc: Fix SoC ID string extraction
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- [PATCH v3 6/6] clk: renesas: r9a09g057: Add clock and reset entries for GIC
- [PATCH v3 5/6] clk: renesas: r9a09g057: Add reset entry for SYS
- [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- [PATCH v3 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- [PATCH v3 2/6] clk: renesas: rzv2h: Relocate MSTOP-related macros to the family driver
- [PATCH v3 1/6] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- [PATCH v3 0/6] Fix MSTOP handling and add SYS/GIC clock entries for RZ/V2H(P) SoC
- Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Re: [PATCH v3 8/8] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v4 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H
- Re: [PATCH v3 7/8] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- Re: [PATCH v3 4/8] i2c: riic: Use GENMASK() macro for bitmask definitions
- Re: [PATCH v3 3/8] i2c: riic: Use BIT macro consistently
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- Re: [PATCH RFT v2 1/5] bitops: add generic parity calculation for u8
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Re: [PATCH v3 4/8] i2c: riic: Use GENMASK() macro for bitmask definitions
- [PATCH v2 3/4] soc: renesas: rz-sysc: Add support for RZ/G3E family
- [PATCH v2 1/4] dt-bindings: soc: renesas: Add RZ/G3E variant SYS bindings
- [PATCH v2 2/4] soc: renesas: rz-sysc: Fix SoC ID string extraction
- [PATCH v2 0/4] soc: renesas: Add system controller support for RZ/G3E SoC
- [PATCH v2 4/4] arm64: dts: renesas: r9a09g047: add sys node
- Re: [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- Re: [PATCH v3 4/8] i2c: riic: Use GENMASK() macro for bitmask definitions
- [geert-renesas-drivers:master] BUILD SUCCESS a8489445b2f972fd2f32c3bbcb77f37a15087626
- renesas-drivers-2024-12-31-v6.13-rc5
- Re: [PATCH v3 1/8] i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
- Re: [PATCH v2 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v2 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v3] ASoC: dt-bindings: renesas,rsnd: remove post-init-providers property
- [geert-renesas-devel:master] BUILD SUCCESS bfa44f8477ad5ff5c4832416c64791d6109e50e4
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH v3 0/8] i2c: riic: driver cleanup and improvements
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- Re: [PATCH RFT v2 1/5] bitops: add generic parity calculation for u8
- Re: [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- [PATCH RFT v2 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- [PATCH RFT v2 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- [PATCH RFT v2 1/5] bitops: add generic parity calculation for u8
- [PATCH RFT v2 3/5] i3c: dw: use get_parity8 helper instead of open coding it
- [PATCH RFT v2 0/5] i3c: introduce and use generic parity helper
- [PATCH RFT v2 2/5] hwmon: (spd5118) Use generic parity calculation
- Re: [PATCH v3 0/8] i2c: riic: driver cleanup and improvements
- Re: [PATCH v3 8/8] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v3 7/8] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH v3 4/8] i2c: riic: Use GENMASK() macro for bitmask definitions
- Re: [PATCH v3 3/8] i2c: riic: Use BIT macro consistently
- Re: [PATCH v3 1/8] i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
- Re: [PATCH v3 0/8] i2c: riic: driver cleanup and improvements
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- [PATCH v2 6/6] arm64: dts: renesas: r9a09g057: Add `renesas,syscon-cpg-error-rst` property to WDT node
- [PATCH v2 5/6] watchdog: rzv2h_wdt: Add support to retrieve the bootstatus information
- [PATCH v2 4/6] dt-bindings: watchdog: renesas: Document `renesas,syscon-cpg-error-rst` property
- [PATCH v2 3/6] arm64: dts: renesas: r9a09g057: Add `syscon` compatible for CPG node
- [PATCH v2 2/6] arm64: dts: renesas: r9a09g047: Add `syscon` compatible for CPG node
- [PATCH v2 1/6] dt-bindings: clock: rzv2h-cpg: Add syscon compatible for CPG block
- [PATCH v2 0/6] Add support to retrieve the bootstatus from watchdog for RZ/V2H(P) SoC
- Re: [PATCH v2 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v2 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- Re: [PATCH v2 2/6] clk: renesas: rzv2h: Relocate MSTOP-related macros to the family driver
- Re: [PATCH v2 1/6] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- Re: [PATCH v2 6/6] clk: renesas: r9a09g057: Add clock and reset entries for GIC
- Re: [PATCH v2 5/6] clk: renesas: r9a09g057: Add reset entry for SYS
- Re: [PATCH v2 2/4] media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-orders
- Re: [PATCH v2 3/4] arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
- [PATCH v3 8/8] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- [PATCH v3 7/8] i2c: riic: Use predefined macro and simplify clock tick calculation
- [PATCH v3 6/8] i2c: riic: Mark riic_irqs array as const
- [PATCH v3 5/8] i2c: riic: Make use of devres helper to request deasserted reset line
- [PATCH v3 4/8] i2c: riic: Use GENMASK() macro for bitmask definitions
- [PATCH v3 3/8] i2c: riic: Use BIT macro consistently
- [PATCH v3 2/8] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- [PATCH v3 1/8] i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
- [PATCH v3 0/8] i2c: riic: driver cleanup and improvements
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v2 0/9] Add support for I2C bus recovery for riic driver
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v2 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- Re: [PATCH v2 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- [geert-renesas-devel:master] BUILD SUCCESS 6e4c3012f4ecfc5b22bc587cbdd5c5062bbdaf1f
- [PATCH v2 6/6] clk: renesas: r9a09g057: Add clock and reset entries for GIC
- [PATCH v2 5/6] clk: renesas: r9a09g057: Add reset entry for SYS
- [PATCH v2 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis
- [PATCH v2 3/6] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- [PATCH v2 2/6] clk: renesas: rzv2h: Relocate MSTOP-related macros to the family driver
- [PATCH v2 1/6] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- [PATCH v2 0/6] Add SYS and GIC clock entries for RZ/V2H(P) SoC
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [PATCH 4/6] dt-bindings: watchdog: renesas: Document `renesas,r9a09g057-syscon-wdt-errorrst` property
- From: Krzysztof Kozlowski
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [PATCH RFT 1/5] bitops: add generic parity calculation for u8
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH 4/6] dt-bindings: watchdog: renesas: Document `renesas,r9a09g057-syscon-wdt-errorrst` property
- Re: [PATCH v2 8/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
- Re: [PATCH v2 0/9] Add support for I2C bus recovery for riic driver
- Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
- Re: [PATCH RFT 5/6] serial: sh-sci: Clean sci_ports[0] after at earlycon exit
- Re: [PATCH RFT 3/6] serial: sh-sci: Move runtime PM enable to sci_probe_single()
- Re: [PATCH RFT 1/6] serial: sh-sci: Check if TX data was written to device in .tx_empty()
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- [geert-renesas-drivers:renesas-pinctrl-for-v6.14] BUILD SUCCESS 03fc60cd8e7b7e6f330d0a48c54545740addd9d8
- Re: [GIT PULL] clk: renesas: Updates for v6.14
- Re: [PATCH v2 0/9] Add support for I2C bus recovery for riic driver
- Re: [PATCH v2 8/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
- Re: [PATCH v2 7/9] i2c: riic: Use predefined macro and simplify clock tick calculation
- Re: [PATCH v2 4/9] i2c: riic: Use GENMASK() macro for bitmask definitions
- Re: [PATCH v2 4/9] i2c: riic: Use GENMASK() macro for bitmask definitions
- Re: [PATCH v2 3/9] i2c: riic: Use BIT macro consistently
- Re: [PATCH v2 9/9] i2c: riic: Implement bus recovery
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v2 1/9] i2c: riic: Replace dev_err with dev_err_probe in probe function
- Re: [PATCH RFT RESEND 2/5] hwmon: (spd5118) Use generic parity calculation
- Re: [PATCH RFT 2/5] hwmon: (spd5118) Use generic parity calculation
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [RFC PATCH 4/5] hwmon: (lm75) separate probe into common and I2C parts
- Re: [RFC PATCH 3/5] hwmon: (lm75) Remove superfluous 'client' member from private struct
- Re: [RFC PATCH 2/5] hwmon: (lm75) simplify regulator handling
- Re: [RFC PATCH 1/5] hwmon: (lm75) simplify lm75_write_config()
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [GIT PULL] pinctrl: renesas: Updates for v6.14
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH v2 0/9] Add support for I2C bus recovery for riic driver
- Re: [PATCH RFT 1/5] bitops: add generic parity calculation for u8
- [PATCH RFT RESEND 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- [PATCH RFT RESEND 3/5] i3c: dw: use get_parity8 helper instead of open coding it
- [PATCH RFT RESEND 2/5] hwmon: (spd5118) Use generic parity calculation
- [PATCH RFT RESEND 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- [PATCH RFT RESEND 1/5] bitops: add generic parity calculation for u8
- [PATCH RFT RESEND 0/5] i3c: introduce and use generic parity helper
- [PATCH RFT 0/5] i3c: introduce and use generic parity helper
- [PATCH RFT 5/5] i3c: cdns: use get_parity8 helper instead of open coding it
- [PATCH RFT 1/5] bitops: add generic parity calculation for u8
- [PATCH RFT 3/5] i3c: dw: use get_parity8 helper instead of open coding it
- [PATCH RFT 4/5] i3c: mipi-i3c-hci: use get_parity8 helper instead of open coding it
- [PATCH RFT 2/5] hwmon: (spd5118) Use generic parity calculation
- [GIT PULL 2/3] Renesas driver updates for v6.14
- [GIT PULL 3/3] Renesas DTS updates for v6.14
- [GIT PULL 0/3] Renesas SoC updates for v6.14
- [GIT PULL] clk: renesas: Updates for v6.14
- [GIT PULL 1/3] Renesas ARM defconfig updates for v6.14
- [GIT PULL] pinctrl: renesas: Updates for v6.14
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- Re: [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- [RFC PATCH v2] hwmon: (lm75) add I3C support for P3T1755
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- [PATCH v2] media: renesas: vsp1: Add support for VSPX
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- [PATCH v4 4/4] arm64: dts: renesas: r8a779g0: Add VSPX instances
- [PATCH v4 2/4] arm64: dts: renesas: r8a779g0: Add FCPVX instances
- [PATCH v4 3/4] clk: renesas: r8a779g0: Add VSPX clocks
- [PATCH v4 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H
- [PATCH v4 1/4] clk: renesas: r8a779g0: Add FCPVX clocks
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- RE: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH net-next 2/2] net: renesas: rswitch: request ts interrupt at port open
- Re: [RFC PATCH 2/5] hwmon: (lm75) simplify regulator handling
- Re: [RFC PATCH 1/5] hwmon: (lm75) simplify lm75_write_config()
- Re: [PATCH] i3c: fix kdoc parameter description for module_i3c_i2c_driver()
- Re: [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- Re: [PATCH net-next 2/2] net: renesas: rswitch: request ts interrupt at port open
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- Re: [RFC PATCH 5/5] hwmon: (lm75) add I3C support for P3T1755
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- Re: [RFC PATCH 5/5] hwmon: (lm75) add I3C support for P3T1755
- [PATCH net-next 2/2] net: renesas: rswitch: request ts interrupt at port open
- [PATCH net-next 1/2] net: renesas: rswitch: use per-port irq handlers
- [PATCH net-next 0/2] net: renesas: rswitch: update irq handling
- Re: [PATCH v7 0/3] drm: adv7511: ADV7535 fixes
- [RFC PATCH 4/5] hwmon: (lm75) separate probe into common and I2C parts
- [RFC PATCH 3/5] hwmon: (lm75) Remove superfluous 'client' member from private struct
- [RFC PATCH 5/5] hwmon: (lm75) add I3C support for P3T1755
- [RFC PATCH 2/5] hwmon: (lm75) simplify regulator handling
- [RFC PATCH 1/5] hwmon: (lm75) simplify lm75_write_config()
- [RFC PATCH 0/5] hwmon: (lm75) add I3C support
- [PATCH] i3c: fix kdoc parameter description for module_i3c_i2c_driver()
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v3 0/3] Add clock driver support for Renesas RZ/G3E SoC
- [PATCH 2/2] rcar-fcp: Add FCPVD reset sequence for VSPD
- [PATCH 1/2] media: rcar-fcp: Add rcar_fcp_soft_reset()
- [PATCH 0/2] Add support for soft reset
- Re: [PATCH] media: renesas: vsp1: Add support for VSPX
- [PATCH] media: renesas: vsp1: Add support for VSPX
- Re: [PATCH v3 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H
- Re: [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- Re: [PATCH v3 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H
- Re: [PATCH 4/6] dt-bindings: watchdog: renesas: Document `renesas,r9a09g057-syscon-wdt-errorrst` property
- From: Krzysztof Kozlowski
- [PATCH v3 4/4] arm64: dts: renesas: r8a779g0: Add VSPX instances
- [PATCH v3 3/4] clk: renesas: r8a779g0: Add VSPX clocks
- [PATCH v3 2/4] arm64: dts: renesas: r8a779g0: Add FCPVX instances
- [PATCH v3 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H
- [PATCH v3 1/4] clk: renesas: r8a779g0: Add FCPVX clocks
- Re: [PATCH RFT 0/6] serial: sh-sci: Fixes for earlycon and keep_bootcon
- Re: [PATCH RFT 6/6] serial: sh-sci: Increment the runtime usage counter for the earlycon device
- Re: [PATCH RFT 5/6] serial: sh-sci: Clean sci_ports[0] after at earlycon exit
- Re: [PATCH RFT 4/6] serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v2 2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- Re: [PATCH RFT 3/6] serial: sh-sci: Move runtime PM enable to sci_probe_single()
- Re: [PATCH 4/6] dt-bindings: watchdog: renesas: Document `renesas,r9a09g057-syscon-wdt-errorrst` property
- Re: [PATCH RFT 2/6] serial: sh-sci: Drop __initdata macro for port_cfg
- Re: [PATCH RFT 1/6] serial: sh-sci: Check if TX data was written to device in .tx_empty()
- Re: [PATCH 4/6] dt-bindings: watchdog: renesas: Document `renesas,r9a09g057-syscon-wdt-errorrst` property
- From: Krzysztof Kozlowski
- Re: [PATCH net-next v2 0/5] mdio support updates
- From: patchwork-bot+netdevbpf
- Re: [PATCH v4 1/7] dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
- Re: [PATCH v4 1/7] dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
- [geert-renesas-drivers:topic/renesas-overlays-v6.13-rc1] BUILD SUCCESS ad9fb352eb8570f4f56918c7f332fefe7c09d429
- [geert-renesas-drivers:master] BUILD SUCCESS 15db8535a3d3246fe5ac1a047e5a308ef27074c8
- [geert-renesas-drivers:renesas-clk-for-v6.14] BUILD SUCCESS 0399362e523db96b72ed898bfea66cee53266658
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- Re: [PATCH v23 3/4] pwm: Add support for RZ/G2L GPT
- Re: [PATCH v2 3/3] hwmon: (lm75) Fix LM75B document link
- Re: [PATCH v2 2/3] hwmon: (lm75) Add NXP P3T1755 support
- Re: [PATCH v2 1/3] dt-bindings: hwmon: lm75: Add NXP P3T1755
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- [PATCH 5/5] clk: renesas: r9a09g057: Add clock and reset entries for GIC
- [PATCH 4/5] clk: renesas: r9a09g057: Add reset entry for SYS
- [PATCH 3/5] clk: renesas: rzv2h: Simplify BUS_MSTOP macros and field extraction
- [PATCH 2/5] clk: renesas: rzv2h: Relocate MSTOP-related macros to the family driver
- [PATCH 1/5] clk: renesas: rzv2h: Fix use-after-free in MSTOP refcount handling
- [PATCH 0/5] Add SYS and GIC clock entries for RZ/V2H(P) SoC
- Re: [PATCH v9 0/6] drm/log: Introduce a new boot logger to draw the kmsg on the screen
- Re: [PATCH v2 8/9] i2c: riic: Add `riic_bus_barrier()` to check bus availability
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]