make dtbs_check:
arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: serial@50000000: dma-names:0: 'tx' was expected
from schema $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: serial@50000000: dma-names:1: 'rx' was expected
from schema $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
...
The DT bindings specify a fixed order of the channels in the dmas and
dma-names properties, while the Linux driver does not care.
Get rid of the warnings by changing the order in the DTS to match the
bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/renesas/r9a06g032.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index 7548291c8d7ede43..87e03446fb4de705 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -211,8 +211,8 @@ uart3: serial@50000000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
- dma-names = "rx", "tx";
+ dmas = <&dmamux 1 0 0 0 1 1>, <&dmamux 0 0 0 0 0 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -224,8 +224,8 @@ uart4: serial@50001000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
- dma-names = "rx", "tx";
+ dmas = <&dmamux 3 0 0 0 3 1>, <&dmamux 2 0 0 0 2 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -237,8 +237,8 @@ uart5: serial@50002000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
- dma-names = "rx", "tx";
+ dmas = <&dmamux 5 0 0 0 5 1>, <&dmamux 4 0 0 0 4 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -250,8 +250,8 @@ uart6: serial@50003000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
- dma-names = "rx", "tx";
+ dmas = <&dmamux 7 0 0 0 7 1>, <&dmamux 6 0 0 0 6 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -263,8 +263,8 @@ uart7: serial@50004000 {
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
- dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
- dma-names = "rx", "tx";
+ dmas = <&dmamux 5 0 0 0 21 1>, <&dmamux 4 0 0 0 20 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
--
2.43.0
