On Thu, 6 Feb 2025 at 09:26, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
> CC Energy Model
>
> On Tue, 28 Jan 2025 at 15:56, Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >
> > Add OPP table for the Renesas RZ/G3S SoC.
> >
> > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> > @@ -28,6 +28,33 @@ audio_clk2: audio2-clk {
> > clock-frequency = <0>;
> > };
> >
> > + cluster0_opp: opp-table-0 {
> > + compatible = "operating-points-v2";
> > + opp-shared;
> > +
> > + opp-137500000 {
> > + opp-hz = /bits/ 64 <137500000>;
> > + opp-microvolt = <940000>;
> > + clock-latency-ns = <300000>;
> > + };
> > + opp-275000000 {
> > + opp-hz = /bits/ 64 <275000000>;
> > + opp-microvolt = <940000>;
> > + clock-latency-ns = <300000>;
> > + };
> > + opp-550000000 {
> > + opp-hz = /bits/ 64 <550000000>;
> > + opp-microvolt = <940000>;
> > + clock-latency-ns = <300000>;
> > + };
> > + opp-1100000000 {
> > + opp-hz = /bits/ 64 <1100000000>;
> > + opp-microvolt = <940000>;
> > + clock-latency-ns = <300000>;
> > + opp-suspend;
> > + };
>
> So all voltages are the same. This means the Energy Model (if enabled)
> will always pick the operating point with the highest clock rate, just
> like on R-Car E3 and RZ/G2E. Apparently that can be fixed by using
> "opp-microwatt" instead, but I am still waiting for feedback about
> some practical points[1] (yes, the Ebisu-4D is still on my desk for
> this reason, and thus unavailable for remote access).
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v6.15.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
