Hi Jacopo,
Thank you for the patch.
On Sun, Oct 17, 2021 at 08:24:43PM +0200, Jacopo Mondi wrote:
> Implement the get_frame_desc pad operation to allow retrieving the
> stream configuration of the max9286 subdevice.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
> drivers/media/i2c/max9286.c | 53 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> index 8bfb88db9976..aca8455d6d56 100644
> --- a/drivers/media/i2c/max9286.c
> +++ b/drivers/media/i2c/max9286.c
> @@ -878,6 +878,58 @@ static int max9286_set_fmt(struct v4l2_subdev *sd,
> return ret;
> }
>
> +static int max9286_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> + struct v4l2_mbus_frame_desc *fd)
> +{
> + struct v4l2_subdev_route *route;
> + struct v4l2_subdev_state *state;
> + int ret = 0;
> +
> + if (pad != MAX9286_SRC_PAD)
> + return -EINVAL;
> +
> + state = v4l2_subdev_lock_active_state(sd);
> +
> + memset(fd, 0, sizeof(*fd));
> +
> + /* One stream entry per each connected route. */
s/connected/active/
> + for_each_active_route(&state->routing, route) {
> + struct v4l2_mbus_frame_desc_entry *entry =
> + &fd->entry[fd->num_entries];
> + struct v4l2_mbus_framefmt *fmt;
> +
> + fmt = v4l2_state_get_stream_format(state, pad,
I would write s/pad/MAX9286_SRC_PAD/. This won't chanege the behaviour,
but would be more explicit.
> + route->source_stream);
> + if (!fmt) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + /*
> + * Assume a YUYV format (0x1e DT) and 16 bpp: we only support
> + * these formats at the moment.
> + */
I'll rebase my pending max9286 series on top of your poc-gpio patches,
but in return I'll ask you to rebase this on top of my patches, which
add support for other formats :-)
> + entry->stream = fd->num_entries++;
> + entry->flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
> + entry->length = fmt->width * fmt->height * 16 / 8;
> + entry->pixelcode = fmt->code;
> +
> + /*
> + * The source stream id corresponds to the virtual channel a
> + * stream is output on.
> + */
> + entry->bus.csi2.vc = route->source_stream;
> + entry->bus.csi2.dt = 0x1e;
> + }
> +
> + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> +
> +out:
> + v4l2_subdev_unlock_state(state);
> +
> + return ret;
> +}
> +
> static int max9286_routing_verify(struct max9286_priv *priv,
> struct v4l2_subdev_krouting *routing)
> {
> @@ -1020,6 +1072,7 @@ static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
> .enum_mbus_code = max9286_enum_mbus_code,
> .get_fmt = v4l2_subdev_get_fmt,
> .set_fmt = max9286_set_fmt,
> + .get_frame_desc = max9286_get_frame_desc,
> .set_routing = max9286_set_routing,
> };
>
--
Regards,
Laurent Pinchart
