Linux for Texus Instruments OMAP Processors

• Thread Index

• RE: [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v5 2/5] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v5 4/5] omap: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v5 3/5] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v5 0/5] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• RE: [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Arun Murthy <arunrmurthy.83@xxxxxxxxx>
• Issue : jffs2 and ecc layout
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Arun Murthy <arunrmurthy.83@xxxxxxxxx>
• Re: [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/10] TWL CORE: Fix sparse warning
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• RE: [PATCH 05/11] omap3: Remove non-existent config option
  • From: "Marathe, Yogesh" <yogesh_marathe@xxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: mixing device idle and CPUidle or non-atomic idle notifiers
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [RFC 3/5] OMAP4: mux: Add data for OMAP4430 ES1
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [lm-sensors] [PATCH 1/2] hwmon: twl4030: Driver for twl4030 madc module
  • From: Keerthy <a0393675@xxxxxx>
• RE: [PATCH v2 03/11] OMAP4: Add the new voltage to vsel calculation formula
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Silesh C V <saileshcv@xxxxxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [RFC 4/5] OMAP4: mux: Select CBL package for SDP4430 with ES1
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH v2 2/2] V4L/DVB: OMAP_VOUT: Use rotation_type to choose between vrfb and sdram buffers
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v2 1/2] V4L/DVB: OMAP_VOUT: Create a seperate vrfb functions library
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v2 0/2] V4L/DVB: OMAP_VOUT: Allow omap_vout to build without VRFB
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Silesh C V <silesh@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: linux-next: manual merge of the crypto tree with the omap tree
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• linux-next: manual merge of the crypto tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• linux-next: manual merge of the net tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: [PATCH v2 03/11] OMAP4: Add the new voltage to vsel calculation formula
  • From: "Lesly Arackal Manuel" <leslyam@xxxxxx>
• [QUESTION] How to enable runtime PM
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v3] OMAP1: Add support for SoC camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] nand: omap2: Missing arg to gpmc_prefetch_reset()
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [GIT PULL] OMAP: hwmod/device/CM: bug fixes for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 6/6] omap3: Remove VMMC2 regulator on IGEP v2 because it's not used.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/6] omap3: fix and improve the LED handling on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 1/6] omap3: Add GPIO's for external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 0/6] omap3: Various fixes and improvements for IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Loïc Minier <loic.minier@xxxxxxxxxx>
• [PATCH v2 07/11] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 04/11] OMAP4: Extend clock data.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 05/11] OMAP4: Adding voltage driver support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 10/11] OMAP4: Enabling smartrefles class 3 driver.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 09/11] OMAP4: Smartreflex framework extensions
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 11/11] OMAP4: Add opp tables.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 08/11] OMAP4: Adding dev atrributes to OMAP4 smartreflex hwmod data
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 01/11] OMAP4: PM debugfs support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 06/11] OMAP4: PM: Program correct init voltages for scalable VDDs
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 02/11] OMAP4: OPP framework support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 03/11] OMAP4: Add the new voltage to vsel calculation formula
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v2 00/11] OMAP4: Smartreflex and Voltage layer support
  • From: Thara Gopinath <thara@xxxxxx>
• RE: [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH RFC:] FIX: OMAP3EVM: Ethernet controller smsc911x reset
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH RFC:] FIX: OMAP3EVM: Ethernet controller smsc911x reset
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [GIT PULL] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC 2/5] OMAP: mux: Make low level function private
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• RE: [PATCH] nand: omap2: Missing arg to gpmc_prefetch_reset()
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: "Basak, Partha" <p-basak2@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] omap4: board-omap4panda: adding leds status1 and status2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] omap: 4430sdp board support for proximity sensor
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] Adding i2c eeprom driver to read EDID
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] omap: Beagle: no gpio_wp pin connection on xM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] omap: Beagle: only Cx boards use pin 23 for write protect
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] omap: Beagle: revision detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] hmc5843: Digital compass board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/7] omap board changes for v2.6.37 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [RFC 2/5] OMAP: mux: Make low level function private
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [RFC 2/5] OMAP: mux: Make low level function private
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• RFC: mixing device idle and CPUidle or non-atomic idle notifiers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC 3/5] OMAP4: mux: Add data for OMAP4430 ES1
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [RFC 2/5] OMAP: mux: Make low level function private
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [RFC 4/5] OMAP4: mux: Select CBL package for SDP4430 with ES1
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [GIT PULL] omap: sram fixes and omap4 es2.0 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/5] ARM: OMAP3LOGIC: Adding low-level debug support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/5] Adding LogicPD OMAP3 board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] nand: omap2: Missing arg to gpmc_prefetch_reset()
  • From: Loïc Minier <loic.minier@xxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] staging: tidspbridge: disable all peripherals at bridge_brd_stop
  • From: Ernesto Ramos <ernesto@xxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/5] ARM: OMAP3LOGIC: Adding SDMMC support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v3 5/5] ARM: OMAP3LOGIC: Adding low-level debug support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v3 0/5] LogicPD minimal board support for LV_SOM and Torpedo
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v3 4/5] ARM: OMAP3LOGIC: Added SMSC Ethernet board support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v3 3/5] ARM: OMAP3: Add generic smsc911x support when connected to GPMC
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v3 1/5] Adding LogicPD OMAP3 board support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3 PM: sleep code clean up
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCH 00/11] omap patches for review for v2.6.37 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] omap: fix section mismatch errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v4 3/4] omap4 hsmmc: Register offset handling
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v4 4/4] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v4 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v4 0/4] omap4 hsmmc: Card detect and Register offset handling
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: SYS_OFF_MODE signaling and CORE domain Transition to OFF Mode
  • From: Laine Walker-Avina <lwalkera@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/3] OMAP: omap_device: Fix to support multiple hwmods for a single device
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] OMAP4: PM: Declare idle modules as functional too
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] OMAP: hwmod/device/CM: bug fixes for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/3] OMAP: hwmod: Set autoidle after smartidle during _sysc_enable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: "Lopez Cruz, Misael" <misael.lopez@xxxxxx>
• Re: [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH] OMAP4: PM: Declare idle modules as functional too
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: hwmod: Set autoidle after smartidle during _sysc_enable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Michał Mirosław <mirqus@xxxxxxxxx>
• Re: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Query on clock naming conventions in clockxxxx_data.c
  • From: "Taneja, Archit" <archit@xxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• RE: [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Query on clock naming conventions in clockxxxx_data.c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 05/11] omap3: Remove non-existent config option
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• RE: [PATCH 1/1] omap: fix section mismatch errors
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCHv2 1/1] omap2/3: Update revision identification
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCHv2 0/1] omap2/3: Update revision identification
  • From: Sanjeev Premi <premi@xxxxxx>
• RE: Query on clock naming conventions in clockxxxx_data.c
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: Sensors and the input layer (was Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver)
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: Sensors and the input layer (was Re: [RFC] [PATCH V2 1/2] input: CMA3000 Accelerometer driver)
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v4] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Query on clock naming conventions in clockxxxx_data.c
  • From: "Taneja, Archit" <archit@xxxxxx>
• RE: [PATCH RESEND v4 1/4] omap3: nand: prefetch in irq mode support
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH 2/2] OMAP3 PM: sleep code clean up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 0/2] OMAP3 PM: sleep code clean up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] OMAP3 PM: sleep code clean up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 1/2] OMAP3 PM: move omap3 sleep to ddr
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 0/2] OMAP3 PM: sleep code clean up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH] OMAP: hwmod: Set autoidle after smartidle during _sysc_enable
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Michał Mirosław <mirqus@xxxxxxxxx>
• [RFC 5/5] OMAP4: mux: Temporary initial SDP4430 mux settings
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [RFC 4/5] OMAP4: mux: Select CBL package for SDP4430 with ES1
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [RFC 3/5] OMAP4: mux: Add data for OMAP4430 ES1
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [RFC 2/5] OMAP: mux: Make low level function private
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [RFC 0/5] OMAP4: mux: Add the OMAP4430 ES1 support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Silesh C V <silesh@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] omap: fix section mismatch errors
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] OMAP4: PM: Declare idle modules as functional too
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: PM: Declare idle modules as functional too
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] OMAP4: PM: Declare idle modules as functional too
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 12/12] omap3: Prevent SDRC deadlock when L3 is changing frequency
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/12] OMAP4: clock: Add optional clock nodes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/12] OMAP4: clock: Fix clock names and align with hwmod names
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 11/12] omap4: control: Fix the control module register accesses
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/12] OMAP4: powerdomain: Update DSS logic state for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/12] OMAP4: PM: Define additional registers for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/12] OMAP4: clocks: Fix ES2 clock issues
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/12] omap4: control: Add ctrl_pad_base to omap_globals
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/12] omap4: control: Add accessor api's for pad control module
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/12] OMAP4: clocks: Update clock tree for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/12] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH 00/14] omap sram, omap4 control module and es2.0 support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [GIT PULL] omap: sram fixes and omap4 es2.0 support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 00/11] omap patches for review for v2.6.37 merge window
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 00/14] omap sram, omap4 control module and es2.0 support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 2/2] omap: mailbox: fix detection for previously supported chips
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 1/2] OMAP: features: export symbol omap3_features
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH 11/11] omap: mmc: extended to pass host capabilities from board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/11] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and docleanups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/11] omap: McBSP: Do not enable SRG in slave mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/11] omap: i2c: Avoid compilation error in case the header is included multiple times
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/11] omap: crypto: updates to enable omap aes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/11] omap: usb: fix build warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/11] omap3: Remove non-existent config option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/11] omap: n8x0: Mux i2s codec port pins for McBSP block
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/11] omap: n8x0: Register i2c2 and add board info with tlv320aic3xfor N810
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/11] omap: n8x0: Cleanup i2c1 and menelaus registration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/11] omap2: fix assorted compiler warnings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/11] omap patches for review for v2.6.37 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/14] omap sram, omap4 control module and es2.0 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] pm-next: misc. PM updates for 2.6.37
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP: hwmod fixes and improvements for 2.6.37
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] pm-next: misc. PM updates for 2.6.37
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/10] OMAP3: PM: move device-specific special cases from PM core into CPUidle
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RESEND][PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] OMAP1: Amstrad Delta: add support for camera
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3 2/2] omap4: platform changes for CMA3000
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap mmc: extended to pass host capabilities from board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: "Basak, Partha" <p-basak2@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• [APPLIED]
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] runtime PM core for OMAP for 2.6.37
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] OMAP: GPIO: ensure debounce clocks are disabled during idle/suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] OMAP4: pm: Change l3_main to l3_main_1 during bus device init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] OMAP: pm-next: few more PM updates for 2.6.37
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omap4: board-omap4panda: adding leds status1 and status2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP: hwmod: Set autoidle after smartidle during _sysc_enable
  • From: Hema HK <hemahk@xxxxxx>
• Re: [PATCH] omap: 4430sdp board support for proximity sensor
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/2] omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP: McBSP: Do not enable SRG in slave mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: SYS_OFF_MODE signaling and CORE domain Transition to OFF Mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] omap3: make coresight register save across OFF modes a sysfs option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [APPLIED] [PATCH]omap: i2c: Avoid compilation error in case the header is
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] Adding i2c eeprom driver to read EDID
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/2] crypto: updates to enable omap aes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH v6 1/3] ARM: OMAP: Beagle: revision detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/1] omap2/3: Update revision identification
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCHv3 8/17] dmtimer: register mappings moved to hwmod database
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/1] omap: fix section mismatch errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] omap: zoom2: Fix ASoC multi-component build breakage by removing dead code
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/2] omap: zoom2: Fix ASoC multi-component build breakage by removing dead code
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [APPLIED] [RFC PATCH] hmc5843: Digital compass board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v3] power: introduce library for device-specific OPPs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v8 2/6] OMAP2420: hwmod data: Add watchdog timer
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 3/6] OMAP2430: hwmod data: Add watchdog timer
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 1/6] OMAP3: hwmod data: Add watchdog timer
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 6/6] OMAP: WDT: Use PM runtime APIs instead of clk FW APIs
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 4/6] OMAP4: hwmod data: Add watchdog timer
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 5/6] OMAP: WDT: Split OMAP1 and OMAP2PLUS device registration
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [RFC][PATCH 2/2] OMAP4: PRCM: Fix usage of prm/cm accessor api's for OMAP4
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [RFC] omap: mailbox: fix detection for previously supported chips
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• RE: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: "Basak, Partha" <p-basak2@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [RFC 3/8] OMAP: powerdomain: Arch specific funcs for state control
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 7/8] omap4: powerdomain: add context_offset field
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 5/8] OMAP: powerdomain: Arch specific funcs for mem control
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 6/8] OMAP: PRM: split the prm accessor api funcs for omap2/3 and omap4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 8/8] omap4: powerdomain: Add pwrdm_clear_all_prev_pwrst
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 2/8] OMAP: powerdomain: Infrastructure to put arch specific code
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 1/8] OMAP: powerdomain: Move powerdomain.c from mach-omap2 to plat-omap
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 4/8] OMAP: powerdomain: Arch specific funcs for logic control
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 0/8] Split powerdomain framework into plat specfic/independent
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH v3] power: introduce library for device-specific OPPs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH v3] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCHv3 8/17] dmtimer: register mappings moved to hwmod database
  • From: "Basak, Partha" <p-basak2@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH v2] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• [PATCH] omap: beagle: add support for wl1271 on the board file
  • From: Luciano Coelho <luciano.coelho@xxxxxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [GIT PULL] OMAP: hwmod fixes and improvements for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 6/9 v3] usb: musb: HWMOD database structures addition for OMAP2430
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• RE: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/9 v3] usb: musb: HWMOD database structures addition for OMAP2430
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCHv3 8/17] dmtimer: register mappings moved to hwmod database
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCHv3 7/17] dmtimer: use list instead of static array
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCHv3 2/17] dmtimer: infrastructure to support hwmod
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Maulik" <x0082077@xxxxxx>
• [RFC] omap: mailbox: fix detection for previously supported chips
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH v3] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3] power: introduce library for device-specific OPPs
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: hermann pitton <hermann-pitton@xxxxxxxx>
• Re: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Hang on Suspend to RAM with 2.6.36-rc4
  • From: Laine Walker-Avina <lwalkera@xxxxxxxxx>
• SYS_OFF_MODE signaling and CORE domain Transition to OFF Mode
  • From: Laine Walker-Avina <lwalkera@xxxxxxxxx>
• [PATCH v3] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/9 v3]usb: musb: hwmod and runtime pm support for musb
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 8/17] dmtimer: register mappings moved to hwmod database
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] omap: pandora: add fixed regulator for wlan
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 4/9 v3] usb: musb: HWMOD database structures addition for OMAP4
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/13 v2] OMAP: Serial: Add omap-serial driver with platform support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH 3/9 v3] usb: musb: HWMOD database structures addition for OMAP3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] omap4: pandaboard: machine cleanups
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Frank Ch. Eigler" <fche@xxxxxxxxxx>
• RE: [PATCHv3 0/17] OMAP dmtimer hwmod
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv3 1/17] OMAP2/3/4:dmtimer:add device names to flck nodes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv3 2/17] dmtimer: infrastructure to support hwmod
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv3 7/17] dmtimer: use list instead of static array
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv3 8/17] dmtimer: register mappings moved to hwmod database
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP4: HSMMC cmd line reset change
  • From: Chris Ball <cjb@xxxxxxxxxx>
• RE: [PATCH] OMAP4: HSMMC cmd line reset change
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• RE: [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [PATCH v3 4/4] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v3 3/4] omap4 hsmmc: Register offset handling
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v3 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v3 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• [PATCH v3 0/4] omap4 hsmmc: Card detect and Register offset handling
  • From: "kishore kadiyala" <kishore.kadiyala@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/5] OMAP4: PM: Update PRCM register bitshits and masks for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] OMAP4: PM: Update PRCM register bitshits and masks for ES2
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH 13/13 v2] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCH] OMAP4: clocks: Fix ES2 clock issues
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP4: clocks: Fix ES2 clock issues
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: The current clock44xx_data.c, after applying recent patches
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 3/4 v2] omap: hwspinlock: Created driver for OMAP hardware spinlock.
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• [PATCH 13/13 v2] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 12/13 v2] OMAP: SERIAL: Enable omap-serial driver in Kconfig
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 11/13 v2] serial: Add OMAP high-speed UART driver
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 10/13 v2] OMAP3: serial: Fix uart4 handling for 3630
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 09/13 v2] OMAP3: PM: Add prepare idle and resume idle call for uart4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 08/13 v2] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 07/13 v2] OMAP clock: Add uart4_ick/fck definitions for 3630
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 06/13 v2] OMAP: UART: use non-locking versions of hwmod enable/idle functions
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 05/13 v2] OMAP: UART: don't do automatic bus-level suspend/resume
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 04/13 v2] OMAP2: UART: remove set_uart_globals
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 03/13 v2] OMAP: UART: omap_device converions, remove implicit 8520 assumptions
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 02/13 v2] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 01/13 v2] OMAP4: UART: Add uart1-4 hwmods data for omap4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 00/13 v2] OMAP: Serial: Add omap-serial driver with platform support
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• RE: [RFC v.4] omap: hwspinlock: Added hwspinlock driver
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• RE: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 7/9 v3] OMAP: Hwmod api changes
  • From: Hema HK <hemahk@xxxxxx>
• Re: [RFC] ARM: DMA coherent allocator: align remapped addresses
  • From: Anders Grafström <grfstrm@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/9 v3] usb: musb: HWMOD database structures addition for OMAP2430
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 5/9 v3] usb: musb: Using omap_device_build for musb device registration
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 4/9 v3] usb: musb: HWMOD database structures addition for OMAP4
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 3/9 v3] usb: musb: HWMOD database structures addition for OMAP3
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 0/9 v3]usb: musb: hwmod and runtime pm support for musb
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH v3 11/11] OMAP3: PM: Register TWL4030 pmic info with the voltage driver.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 10/11] OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 09/11] OMAP3: PM: Smartreflex Class3 initialization from board files.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 08/11] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 07/11] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 06/11] OMAP3: PM: Adding smartreflex class3 driver
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 05/11] OMAP3: PM: Adding smartreflex hwmod data
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 04/11] OMAP3: PM: Adding smartreflex device file.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 03/11] OMAP3: PM: Adding smartreflex driver support.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 02/11] OMAP3: PM: Adding voltage driver support for OMAP3
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 01/11] OMAP: PM: Export the main pm debugfs directory
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v3 00/11] OMAP3: Adding Smartreflex and Voltage driver support
  • From: Thara Gopinath <thara@xxxxxx>
• Re: How to enable sys_clkout1 for use by brf6300
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: [PATCH 3/4] omap4: pandaboard: Adding card detect support for MMC1
  • From: David Anders <x0132446@xxxxxx>
• Re: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v3]Update broken web addresses.
  • From: Jeremy Kerr <jk@xxxxxxxxxx>
• Re: [PATCH 1/2 v3]Update broken web addresses.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [RFC 0/3] Improve fallback LPJ calculation
  • From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
• RE: [PATCH v2] OMAP3: Keypad: Fix failure exit path in probe
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v2 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] omap4: pandaboard: Adding card detect support for MMC1
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 3/5] omap3: cm-t3517: add support for usb host.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: Branch with the recent OMAP4 clock and PRCM patches for testing
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH 5/5] OMAP4: powerdomain: add context_offset field
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Branch with the recent OMAP4 clock and PRCM patches for testing
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP4: clock: Fix missing optional clocks
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: clock: Add optional clock nodes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: clock: Add optional clock nodes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/4] omap4: pandaboard: Adding card detect support for MMC1
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP4: clock: Fix missing optional clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 2/7] OMAP4: clock: Fix clock names and align with hwmod names
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 3/5] OMAP4: clocks: Update clock tree for ES2
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 3/5] OMAP4: clocks: Update clock tree for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 3/5] OMAP4: clocks: Update clock tree for ES2
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v2 2/6] OMAP1: Add support for SoC camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH 1/5] OMAP4: PM: Update PRCM register bitshits and masks for ES2
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 2/5] OMAP4: PM: Define additional registers for ES2
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 5/5] OMAP4: powerdomain: add context_offset field
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/5] OMAP4: powerdomain: Update DSS logic state for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/5] OMAP4: PM: Define additional registers for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] OMAP4: PM: Update PRCM register bitshits and masks for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/5] OMAP4: powerdomain: add context_offset field
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH 3/5] OMAP4: clocks: Update clock tree for ES2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCHV4] OMAP3: SDRC : Errata 1.176 Fix - Accesses to DDR stall in SDRC after a Warm-reset
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [PATCH 1/2 v3]Update broken web addresses.
  • From: "Justin P. Mattock" <justinmattock@xxxxxxxxx>
• Re: [PATCH 1/2 v3]Update broken web addresses.
  • From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
• [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: tom.leiming@xxxxxxxxx
• [PATCH 2/2 v3]Update broken web addresses archive dot org only.
  • From: "Justin P. Mattock" <justinmattock@xxxxxxxxx>
• [PATCH 1/2 v3]Update broken web addresses.
  • From: "Justin P. Mattock" <justinmattock@xxxxxxxxx>
• RE: [PATCHV4] OMAP3: SDRC : Errata 1.176 Fix - Accesses to DDR stall in SDRC after a Warm-reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v6 0/7] OMAP: WDT: Implement WDT in hwmod way
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: HWMOD: Handle opt clocks using clk_add_alias
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: hwmod: Fix softreset for modules with optional clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: hermann pitton <hermann-pitton@xxxxxxxx>
• Re: [PATCH] OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/5] OMAP: hwmod: improve documentation, clean up function names
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/5] OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/5] OMAP: hwmod: Fix softreset for modules with optional clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/5] OMAP: hwmod: Enable module wakeup if in smartidle
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/5] OMAP: hwmod: Handle opt clocks node using clk_add_alias
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/5] OMAP: hwmod: second set of core patches for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Make sure i2c bus is free before setting it to idle
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v6 00/13] OMAP: GPIO: Implement GPIO in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v6 07/13] OMAP3: hwmod data: Add GPIO
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: hwmod: Enable module wakeup if in smartidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/6] OMAP4: hwmod data: Add watchdog timer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 1/4] omap4: pandaboard: remove unused hsmmc definition
  • From: David Anders <x0132446@xxxxxx>
• [PATCH 3/4] omap4: pandaboard: Adding card detect support for MMC1
  • From: David Anders <x0132446@xxxxxx>
• [PATCH 4/4] omap4: pandaboard: enable the ehci port on pandaboard
  • From: David Anders <x0132446@xxxxxx>
• [PATCH 2/4] omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: David Anders <x0132446@xxxxxx>
• [PATCH 0/4] omap4: pandaboard: machine cleanups
  • From: David Anders <x0132446@xxxxxx>
• Re: [PATCH] OMAP: hwmod: Enable module wakeup if in smartidle
  • From: Paul Walmsley <paul@xxxxxxxxx>