[PATCH v3 1/5] Adding LogicPD OMAP3 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adding support for LogicPD's OMAP 3530 LV SOM and
OMAP 35x Torpedo board.

Signed-off-by: Tim Nordell <tim.nordell@xxxxxxxxxxx>
---
 arch/arm/mach-omap2/Kconfig            |   18 ++++
 arch/arm/mach-omap2/Makefile           |    4 +
 arch/arm/mach-omap2/board-omap3logic.c |  143 ++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-omap3logic.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b48bacf..2cc61fa 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -135,6 +135,24 @@ config MACH_OMAP_LDP
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_OMAP3530_LV_SOM
+	bool "OMAP3 Logic 3530 LV SOM board"
+	depends on ARCH_OMAP3
+	default y
+	help
+	 Support for the LogicPD OMAP3530 SOM Development kit
+	 for full description please see the products webpage at
+	 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
+
+config MACH_OMAP3_TORPEDO
+	bool "OMAP3 Logic 35x Torpedo board"
+	depends on ARCH_OMAP3
+	default y
+	help
+	 Support for the LogicPD OMAP35x Torpedo Development kit
+	 for full description please see the products webpage at
+	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
+
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 88d3a1e..9feadd8 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -115,6 +115,10 @@ obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
 					   board-flash.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
+					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
new file mode 100644
index 0000000..72769f7
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3logic.c
+ *
+ * Copyright (C) 2010 Li-Pro.Net
+ * Stephan Linz <linz@xxxxxxxxxx>
+ *
+ * Copyright (C) 2010 Logic Product Development, Inc.
+ * Peter Barada <peter.barada@xxxxxxxxxxx>
+ *
+ * Modified from Beagle, EVM, and RX51
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mux.h"
+
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/timer-gp.h>
+#include <plat/sdrc.h>
+#include <plat/control.h>
+
+#define OMAP3LOGIC_SMSC911X_CS			1
+
+#define OMAP3530_LV_SOM_MMC_GPIO_CD             110
+#define OMAP3530_LV_SOM_MMC_GPIO_WP             126
+#define	OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ	152
+
+#define OMAP3_TORPEDO_MMC_GPIO_CD               127
+#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
+
+static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3logic_vmmc1 = {
+	.constraints = {
+		.name			= "VMMC1",
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &omap3logic_vmmc1_supply,
+};
+
+static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
+			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
+};
+
+static struct twl4030_platform_data omap3logic_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &omap3logic_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3logic_twldata,
+	},
+};
+
+static int __init omap3logic_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo,
+				ARRAY_SIZE(omap3logic_i2c_boardinfo));
+	return 0;
+}
+
+static void __init omap3logic_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap3logic_init(void)
+{
+	omap3logic_i2c_init();
+	omap_serial_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.init_irq	= omap3logic_init_irq,
+	.init_machine	= omap3logic_init,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.init_irq	= omap3logic_init_irq,
+	.init_machine	= omap3logic_init,
+	.timer		= &omap_timer,
+MACHINE_END
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux