ASoC Multi-Component Support patch removes #if 0 in board-zoom2.c that was
used to protect some uncompiling dead code. Remove that code as it seems to
be here quite some time since commit 479f12c.
Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx>
Cc: Vikram Pandita <vikram.pandita@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
---
Sorry for not noticing this before. Somehow my own test config didn't include
zoom2 like omap3_defconfig does.
---
arch/arm/mach-omap2/board-zoom2.c | 12 ------------
1 files changed, 0 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index efbcd8f..86d4515 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -41,10 +41,6 @@ void zoom2_set_hs_extmute(int mute)
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
-static struct twl4030_madc_platform_data zoom2_madc_data = {
- .irq_line = 1,
-};
-
static struct twl4030_codec_audio_data zoom2_audio_data = {
.audio_mclk = 26000000,
.ramp_delay_value = 3, /* 161 ms */
@@ -62,15 +58,7 @@ static struct twl4030_platform_data zoom2_twldata = {
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
- .bci = &zoom2_bci_data,
- .madc = &zoom2_madc_data,
- .usb = &zoom2_usb_data,
- .gpio = &zoom2_gpio_data,
- .keypad = &zoom2_kp_twl4030_data,
.codec = &zoom2_codec_data,
- .vmmc1 = &zoom2_vmmc1,
- .vmmc2 = &zoom2_vmmc2,
- .vsim = &zoom2_vsim,
};
static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
