ASoC Multi-Component Support moves some code from sound/soc/omap/zoom2.c into
arch/arm/mach-omap2/board-zoom2.c. However, that code should go to
board-zoom-peripherals.c instead as there is common code and registration
for zoom boards.
Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx>
Cc: Vikram Pandita <vikram.pandita@xxxxxx>
Cc: Lopez Cruz, Misael <x0052729@xxxxxx>
Cc: Jorge Eduardo Candelaria <jorge.candelaria@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
---
I don't have this HW so not tested. This is omap architecture patch but I
think this should go together with ASoC Multi-Component.
---
arch/arm/mach-omap2/board-zoom-peripherals.c | 12 +++++++
arch/arm/mach-omap2/board-zoom2.c | 44 --------------------------
2 files changed, 12 insertions(+), 44 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b39849..3c65304 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -24,6 +24,8 @@
#include <plat/common.h>
#include <plat/usb.h>
+#include <mach/board-zoom.h>
+
#include "mux.h"
#include "hsmmc.h"
@@ -188,6 +190,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
return 0;
}
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+ gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
static int zoom_batt_table[] = {
/* 0 C*/
@@ -257,6 +264,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
static int __init omap_i2c_init(void)
{
+ if (machine_is_omap_zoom2()) {
+ zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
+ zoom_audio_data.hs_extmute = 1;
+ zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+ }
omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
ARRAY_SIZE(zoom_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 86d4515..00c8f83 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -35,49 +35,6 @@ static void __init omap_zoom2_init_irq(void)
omap_gpio_init();
}
-/* EXTMUTE callback function */
-void zoom2_set_hs_extmute(int mute)
-{
- gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
-}
-
-static struct twl4030_codec_audio_data zoom2_audio_data = {
- .audio_mclk = 26000000,
- .ramp_delay_value = 3, /* 161 ms */
- .hs_extmute = 1,
- .set_hs_extmute = zoom2_set_hs_extmute,
-};
-
-static struct twl4030_codec_data zoom2_codec_data = {
- .audio_mclk = 26000000,
- .audio = &zoom2_audio_data,
-};
-
-static struct twl4030_platform_data zoom2_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
- /* platform_data for children goes here */
- .codec = &zoom2_codec_data,
-};
-
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("twl4030", 0x48),
- .flags = I2C_CLIENT_WAKE,
- .irq = INT_34XX_SYS_NIRQ,
- .platform_data = &zoom2_twldata,
- },
-};
-
-static int __init omap3_zoom2_i2c_init(void)
-{
- omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
- ARRAY_SIZE(zoom2_i2c_boardinfo));
- return 0;
-}
-
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -144,7 +101,6 @@ static void __init omap_zoom2_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
- omap3_zoom2_i2c_init();
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init();
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
