To standarize among other uarts (1 to 3), we shall now:
- Enable uart4 autodile bit.
- Enable uart4 wakeup in PER.
- Allow uart4 to wakeup the MPU.
Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx>
Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx>
---
arch/arm/mach-omap2/cm-regbits-34xx.h | 2 ++
arch/arm/mach-omap2/pm34xx.c | 15 +++++++++++++--
arch/arm/mach-omap2/prcm-common.h | 2 ++
arch/arm/mach-omap2/prm-regbits-34xx.h | 1 +
4 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index fe82b79..4f959a7 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -649,6 +649,8 @@
#define OMAP3430_ST_MCBSP2_MASK (1 << 0)
/* CM_AUTOIDLE_PER */
+#define OMAP3630_AUTO_UART4_MASK (1 << 18)
+#define OMAP3630_AUTO_UART4_SHIFT 18
#define OMAP3430_AUTO_GPIO6_MASK (1 << 17)
#define OMAP3430_AUTO_GPIO6_SHIFT 17
#define OMAP3430_AUTO_GPIO5_MASK (1 << 16)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d2b940c..043faaa 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -676,6 +676,14 @@ static void __init omap3_d2d_idle(void)
static void __init prcm_setup_regs(void)
{
+ u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
+ OMAP3630_AUTO_UART4_MASK : 0;
+ u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
+ OMAP3630_EN_UART4_MASK : 0;
+ u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
+ OMAP3630_GRPSEL_UART4_MASK : 0;
+
+
/* XXX Reset all wkdeps. This should be done when initializing
* powerdomains */
prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@@ -762,6 +770,7 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
cm_write_mod_reg(
+ omap3630_auto_uart4_mask |
OMAP3430_AUTO_GPIO6_MASK |
OMAP3430_AUTO_GPIO5_MASK |
OMAP3430_AUTO_GPIO4_MASK |
@@ -838,14 +847,16 @@ static void __init prcm_setup_regs(void)
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
- prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+ prm_write_mod_reg(omap3630_en_uart4_mask |
+ OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
OMAP3430_EN_MCBSP4_MASK,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
- prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+ prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+ OMAP3430_GRPSEL_GPIO2_MASK |
OMAP3430_GRPSEL_GPIO3_MASK |
OMAP3430_GRPSEL_GPIO4_MASK |
OMAP3430_GRPSEL_GPIO5_MASK |
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 86edcf9..298a22a 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -425,6 +425,8 @@
#define OMAP3430_EN_MCBSP2_SHIFT 0
/* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3630_ST_UART4_SHIFT 18
+#define OMAP3630_ST_UART4_MASK (1 << 18)
#define OMAP3430_ST_GPIO6_SHIFT 17
#define OMAP3430_ST_GPIO6_MASK (1 << 17)
#define OMAP3430_ST_GPIO5_SHIFT 16
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 7fd6023..9e63cb7 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -122,6 +122,7 @@
#define OMAP3430_MEMRETSTATE_MASK (1 << 8)
/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3630_GRPSEL_UART4_MASK (1 << 18)
#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
#define OMAP3430_GRPSEL_GPIO4_MASK (1 << 15)
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
