"Govindraj.R" <govindraj.raja@xxxxxx> writes: > This patch series adds a serial driver to handle uarts on omap platforms. > Currenlty omap-uarts are handled with 8250 driver, since updating > this driver with omap specific features will over load > the 8250 driver with all omap-specific data thus a new driver > is added to configure and support features like > dma, h/w, s/w flowcontrol for omap-uarts. > Also the patch series updates various low level platform specific > serial data to support omap-uarts with hwmod framework and adds support > for uart4 on OMAP3630. > > v1 to v2 changes: > ---------------- > 1) Incorporate timeout check > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg35106.html > 2) Add wk_st, padconf etc for uart4 > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg35105.html 3) All UARTs initialized for Zoom2/3 Also, please report platforms this was tested on, and what was tested. You need to validate retention and off-mode during idle and suspend, as well as enabling/disabling the UART sleep_timeout values via sysfs. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
