This patch series adds a serial driver to handle uarts on omap platforms. Currenlty omap-uarts are handled with 8250 driver, since updating this driver with omap specific features will over load the 8250 driver with all omap-specific data thus a new driver is added to configure and support features like dma, h/w, s/w flowcontrol for omap-uarts. Also the patch series updates various low level platform specific serial data to support omap-uarts with hwmod framework and adds support for uart4 on OMAP3630. v1 to v2 changes: ---------------- 1) Incorporate timeout check http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg35106.html 2) Add wk_st, padconf etc for uart4 http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg35105.html Benoit Cousson (1): OMAP4: UART: Add uart1-4 hwmods data for omap4 Govindraj.R (8): OMAP2: UART: remove set_uart_globals. OMAP clock: Add uart4_ick/fck definitions for 3630 OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs OMAP3: PM: Add prepare idle and resume idle call for uart4 OMAP3: serial: Fix uart4 handling for 3630 serial: Add OMAP high-speed UART driver OMAP: SERIAL: Enable omap-serial driver in Kconfig. OMAP3: SERIAL: Initialize all omap-uarts for zoom boards Kevin Hilman (4): OMAP2/3: UART: add omap_hwmod data for UARTs 1-4 OMAP: UART: omap_device converions, remove implicit 8520 assumptions OMAP: UART: don't do automatic bus-level suspend/resume OMAP: UART: use non-locking versions of hwmod enable/idle functions arch/arm/mach-omap2/Kconfig | 11 +- arch/arm/mach-omap2/board-3630sdp.c | 1 - arch/arm/mach-omap2/board-zoom-peripherals.c | 1 + arch/arm/mach-omap2/clock3xxx_data.c | 22 + arch/arm/mach-omap2/cm-regbits-34xx.h | 2 + arch/arm/mach-omap2/omap_hwmod_2420_data.c | 193 ++++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 193 ++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 253 +++++- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 235 +++++ arch/arm/mach-omap2/pm34xx.c | 17 +- arch/arm/mach-omap2/prcm-common.h | 5 + arch/arm/mach-omap2/prm-regbits-34xx.h | 1 + arch/arm/mach-omap2/serial.c | 557 ++++++----- arch/arm/plat-omap/common.c | 16 - arch/arm/plat-omap/include/plat/common.h | 1 - arch/arm/plat-omap/include/plat/dma.h | 2 + arch/arm/plat-omap/include/plat/irqs.h | 2 + arch/arm/plat-omap/include/plat/omap-serial.h | 129 +++ drivers/serial/Kconfig | 27 + drivers/serial/Makefile | 1 + drivers/serial/omap-serial.c | 1332 +++++++++++++++++++++++++ include/linux/serial_core.h | 3 + 22 files changed, 2707 insertions(+), 297 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/omap-serial.h create mode 100644 drivers/serial/omap-serial.c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
