[PATCH v5 3/5] omap3: nand: configurable fifo threshold to gain the throughput

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



  Configure the FIFO THREASHOLD value different for read and write to keep busy
  both filling and to drain out of FIFO at reading and writing.

Signed-off-by: Vimal Singh <vimalsingh@xxxxxx>
Signed-off-by: Sukumar Ghorai <s-ghorai@xxxxxx>
---
 arch/arm/mach-omap2/gpmc.c             |   11 +++++++----
 arch/arm/plat-omap/include/plat/gpmc.h |    5 ++++-
 drivers/mtd/nand/omap2.c               |   24 +++++++++++++++---------
 3 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 9ecb2a7..10ce5d5 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -59,7 +59,6 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
-#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
 #define CS_NUM_SHIFT		24
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
@@ -595,15 +594,19 @@ EXPORT_SYMBOL(gpmc_nand_write);
 /**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
  * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
  */
-int gpmc_prefetch_enable(int cs, int dma_mode,
+int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
 
-	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
+		printk(KERN_ERR "PREFETCH Fifo Threshold is not supported\n");
+		return -1;
+	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
 
@@ -611,7 +614,7 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		 * enable the engine. Set which cs is has requested for.
 		 */
 		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD |
+					PREFETCH_FIFOTHRESHOLD(fifo_th) |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
 					(0x1 & is_write)));
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 054e704..fb82335 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -83,6 +83,9 @@
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
+#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define PREFETCH_FIFOTHRESHOLD(val)	(val << 8)
+
 /*
  * Note that all values in this struct are in nanoseconds, while
  * the register values are in gpmc_fck cycles.
@@ -133,7 +136,7 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 72994e8..5ac7f7c 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -275,7 +275,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	}
 
 	/* configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
@@ -319,7 +320,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 	}
 
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
 	if (ret) {
 		/* PFPW engine is busy, use cpu copy method */
 		if (info->nand.options & NAND_BUSWIDTH_16)
@@ -373,10 +375,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	dma_addr_t dma_addr;
 	int ret;
 
-	/* The fifo depth is 64 bytes. We have a sync at each frame and frame
-	 * length is 64 bytes.
+	/* The fifo depth is 64 bytes max.
+	 * But configure the FIFO-threahold to 32 to get a sync at each frame
+	 * and frame length is 32 bytes.
 	 */
-	int buf_len = len >> 6;
+	int buf_len = len >> 5;
 
 	if (addr >= high_memory) {
 		struct page *p1;
@@ -415,7 +418,8 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 					OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
 	}
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x1, len, is_write);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;
@@ -559,7 +563,8 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
 	init_completion(&info->comp);
 
 	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;
@@ -604,8 +609,9 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	info->buf = (u_char *) buf;
 	init_completion(&info->comp);
 
-	/*  configure and start prefetch transfer */
-	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	/* configure and start prefetch transfer : size=24 */
+	ret = gpmc_prefetch_enable(info->gpmc_cs,
+			(PREFETCH_FIFOTHRESHOLD_MAX*3)/8, 0x0, len, 0x1);
 	if (ret)
 		/* PFPW engine is busy, use cpu copy methode */
 		goto out_copy;
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux