Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [GIT PULL] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCHv3 1/1] omap3: Add minimal OMAP3 IGEP module support.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 0/1] Add initial support for OMAP3 IGEP module
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omap: pandora: enable twl4030 charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCHv2] omap3: Add minimal OMAP3 IGEP module support.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2] omap3: Add minimal OMAP3 IGEP module support.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 0/1] Add initial support for OMAP3 IGEP module
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH] omap3: Restore the powerdomian states post wfi in omap_sram_idle
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] omap3: Add minimal OMAP3 IGEP module support.
  • From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: David Cohen <david.cohen@xxxxxxxxx>
• Re: [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: David Cohen <david.cohen@xxxxxxxxx>
• RE: [PATCH 02/14] omap: Map only available sram memory
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• RE: [PATCH v3 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH v3 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH] OMAP2plus: PM: omap_device: API for set/get MIDLE mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH] OMAP2plus: PM: omap_device: API for set/get MIDLE mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• NOTE: hwmod changes merged to linux-omap master for testing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCHV4] OMAP3: SDRC : Errata 1.176 Fix - Accesses to DDR stall in SDRC after a Warm-reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: "Lopez Cruz, Misael" <misael.lopez@xxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 8/8] omap4 hsmmc: Update ocr mask for MMC2 for regulator to use
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] omap4 hsmmc: Register offset handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] OMAP4 ES2: HSMMC soft reset change
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] omap: pandora: enable twl4030 charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] omap: pandora: add fixed regulator for wlan
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] omap2/3: Update revision identification
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] omap: Fix omap_mux_init_signal not to trash muxname
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] omap2+ patches for v2.6.37 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Abraham Arce <x0066660@xxxxxx>
• Re: [PATCH] omap3: Add minimal OMAP3 IGEP module support.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: zoom2/3: fix build caused by wl1271 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: zoom2: fix build break when CONFIG_WL12XX_PLATFORM_DATA=n
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] omap: pandora: enable twl4030 charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] omap: zoom2: fix build break when CONFIG_WL12XX_PLATFORM_DATA=n
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 02/14] omap: Map only available sram memory
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/2] omap: zoom: Move new code introduced by ASoC m-c to board-zoom-peripherals
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: Dropping omap3430 ES1.0 support in mainline
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Dropping omap3430 ES1.0 support in mainline
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap3: Add minimal OMAP3 IGEP module support.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCHv3 3/17] dmtimer: add omap2420 hwmod database
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Dropping omap3430 ES1.0 support in mainline
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: Dropping omap3430 ES1.0 support in mainline
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: Dropping omap3430 ES1.0 support in mainline
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Dropping omap3430 ES1.0 support in mainline
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Dropping omap3430 ES1.0 support in mainline
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 00/10] OMAP: SCM/McBSP/clock: branch integration patches for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/10] OMAP2+: Kconfig: disallow builds for boards that don't use the currently-selected SoC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/10] OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/10] OMAP2420: CTRL: fix OMAP242X_CTRL_REGADDR macro
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/10] OMAP: split plat-omap/common.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/10] OMAP: McBSP: implement functional clock switching via clock framework
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/10] OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/10] OMAP2430: clock: add MCBSP_CLKS node and clkdev aliases
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/10] OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/10] OMAP2420: clock: add MCBSP_CLKS node and clkdev aliases
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/10] OMAP3xxx: clock: add clkdev aliases for McBSP fclk source switching
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] omap: zoom2: fix build break when CONFIG_WL12XX_PLATFORM_DATA=n
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCHv3 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 6/6] omap3: Remove VMMC2 regulator on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 2/6] omap3: fix and improve the LED handling on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv3 0/6] omap3: Various fixes and improvements for IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/2] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] OMAP3: CPUidle: remove redundant setting of PER next power state
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] OMAP: couple more PM fixes for 2.6.37
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• omap2plus_defconfig fails to compile on linux-next with OMAP2 support
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] omap: zoom2: fix build break due to ASoC changes
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH] omap: zoom2: fix build break due to ASoC changes
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] omap: fix build break in omapfb due to a typo
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] usb: musb: fix build break due to partial rename
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap: zoom2: fix build break when CONFIG_WL12XX_PLATFORM_DATA=n
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap: zoom2/3: fix build caused by wl1271 support
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap: zoom2: fix build break due to ASoC changes
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] omap: Map only available sram memory
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCHv2 0/6] omap3: Various fixes and improvements for IGEP v2 board.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 2/6] omap3: fix and improve the LED handling on IGEP v2 board.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 6/6] omap3: Remove VMMC2 regulator on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 5/6] omap3: Add i2c eeprom driver to read EDID on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 4/6] omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 3/6] omap3: Introduce function to detect the IGEP v2 hardware revision.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 2/6] omap3: fix and improve the LED handling on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 1/6] omap3: Add external VBUS power switch and overcurrent detect on IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCHv2 0/6] omap3: Various fixes and improvements for IGEP v2 board.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• RE: [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• Re: [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: David Cohen <david.cohen@xxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: multiple linux-next OMAP3 build errors
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: multiple linux-next OMAP3 build errors
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• Re: [PATCH] OMAP: Fix compilation warnings
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• multiple linux-next OMAP3 build errors
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH 1/4] iommu: remove CONFIG_MPU_BRIDGE_IOMMU
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• Re: [PATCHv3 1/17] OMAP2/3/4:dmtimer:add device names to flck nodes
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch] Error when compiling without CONFIG_PM_DEBUG
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] omap4 hsmmc: Register offset handling
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 3/4] omap4 hsmmc: Register offset handling
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [Patch] Error when compiling without CONFIG_PM_DEBUG
  • From: GERBER Patrick <Patrick.Gerber@xxxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 3/4] cbus: tahvo: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v3 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v3 0/2] OMAP2/3: DMA: FIFO drain errata fixes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 4/4] cbus: tahvo-usb: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/4] cbus: tahvo: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] cbus: retu: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] cbus: remove unneded includes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] CBUS patches (v2)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: David Cohen <david.cohen@xxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: David Cohen <david.cohen@xxxxxxxxx>
• RE : [omap3] Nand flash initialisation error
  • From: GERBER Patrick <Patrick.Gerber@xxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH v5] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• RE: [PATCH 05/11] omap3: Remove non-existent config option
  • From: "Marathe, Yogesh" <yogesh_marathe@xxxxxx>
• RE: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: David Cohen <david.cohen@xxxxxxxxx>
• [PATCH v2 0/2] OMAP2/3: DMA: FIFO drain errata fixes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH] mfd: twl4030: add twl4030_bci platform_data back
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] omap: pandora: enable twl4030 charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 1/4] iommu: remove CONFIG_MPU_BRIDGE_IOMMU
  • From: "Marathe, Yogesh" <yogesh_marathe@xxxxxx>
• RE: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/4] CBUS patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/4] CBUS patches
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/4] cbus: tahvo-usb: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/4] cbus: tahvo: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] cbus: retu: move platform_device to board file
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] cbus: remove unneded includes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] CBUS patches
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCHv3 1/17] OMAP2/3/4:dmtimer:add device names to flck nodes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] OMAP3: DMA: Errata: sDMA FIFO draining does not finish
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/2] OMAP2/3: DMA: FIFO drain errata fixes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/2] omap: dma: Fix buffering disable bit setting for omap24xx
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 1/3 v5] AM35x: Add musb support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH] OMAP: Fix compilation warnings
  • From: pramod.gurav@xxxxxx
• RE: [omap3] Nand flash initialisation error
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3 v5] AM35x: Add musb support
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCHv3 6/17] dmtimer: add omap44xx hwmod database
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH v6 8/8] Input: omap4 - pm runtime
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCHv3 1/17] OMAP2/3/4:dmtimer:add device names to flck nodes
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH] omap: Keep nwires for omap1 and 2420 MMC controller (Re: [PATCH] omap mmc: extended to pass host capabilities from board file)
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH] scatterlist: define SG chain for arm architecture
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• [PATCH] scatterlist: define SG chain for arm architecture
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCH 0/4] iovmm: fixes for iovmm module
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCH 4/4] iovmm: replace __iounmap with omap_iounmap
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCH 2/4] iovmm: fix roundup for next area and end check for the last area
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCH 1/4] iommu: remove CONFIG_MPU_BRIDGE_IOMMU
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCH 3/4] iovmm: add superpages support to fixed da address
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 01/11] staging: tidspbridge: replace iommu custom for opensource implementation
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 07/11] staging: tidspbridge - move all iommu related code to a new file
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 11/11] staging: tidspbridge - remove dmm custom module
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 04/11] staging: tidspbridge - remove custom mmu code from tiomap3430.c
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 02/11] staging: tidspbridge - move shared memory iommu maps to tiomap3430.c
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 10/11] staging: tidspbridge - deprecate reserve/unreserve_memory funtions
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 05/11] staging: tidspbridge - fix mmufault support
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 06/11] staging: tidspbrge - remove hw directory
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 09/11] staging: tidspbridge - remove reserved memory clean up
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 03/11] staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 08/11] staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [PATCHv2 00/11] staging tidspbridge: iommu migration
  • From: Fernando Guzman Lugo <x0095840@xxxxxx>
• [GIT PULL] Couple of omap fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCHv3 11/17] dmtimer: early boot infrastructure
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 6/17] dmtimer: add omap44xx hwmod database
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCHv3 5/17] dmtimer: add omap3xxx hwmod database
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCHv3 4/17] dmtimer: add omap2430 hwmod database
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCHv3 3/17] dmtimer: add omap2420 hwmod database
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH V2] OMAP4 ES2: HSMMC soft reset change
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 2/17] dmtimer: infrastructure to support hwmod
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCHv3 1/17] OMAP2/3/4:dmtimer:add device names to flck nodes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCHv3 0/17] OMAP dmtimer hwmod
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Michał Mirosław <mirqus@xxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] OMAP1: Amstrad Delta: add camera controlled LEDS trigger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] OMAP1: Amstrad Delta: add support for camera
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] OMAP1: Add support for SoC camera interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Few omap1 patches for v2.6.37 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] staging: tidspbridge: disable all peripherals at bridge_brd_stop
  • From: Ernesto Ramos <ernesto@xxxxxx>
• Re: [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH] omap: Keep nwires for omap1 and 2420 MMC controller (Re: [PATCH] omap mmc: extended to pass host capabilities from board file)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] staging:ti dspbridge: Replace find_lcm with lcm kernel func
  • From: Ernesto Ramos <ernesto@xxxxxx>
• [PATCH] staging:ti dspbridge: remove cmm_xlator_delete wrapper
  • From: Ernesto Ramos <ernesto@xxxxxx>
• [PATCH] PM: add synchronous runtime interface for interrupt handlers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH v3 02/11] OMAP3: PM: Adding voltage driver support for OMAP3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] staging: tidspbridge: disable all peripherals at bridge_brd_stop
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [Beagleboard] linux-omap-pm -- cpufreq query
  • From: Haribabu Narayanan <haribabu@xxxxxxxxxxx>
• Re: Compilation: omap-for-linus omap2plus error
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Compilation: omap-for-linus omap2plus error
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/8] Input: omap4 - pm runtime
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [Beagleboard] linux-omap-pm -- cpufreq query
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] SoC Camera: add driver for OMAP1 camera interface
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] OMAP4: Extend clock data.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: Extend clock data.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: Extend clock data.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: Extend clock data.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Compilation: omap-for-linus omap2plus error
  • From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
• [PATCH] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH] OMAP4: Extend clock data.
  • From: Thara Gopinath <thara@xxxxxx>
• [RESEND][PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Abraham Arce <x0066660@xxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: Compilation: omap-for-linus omap2plus error
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Abraham Arce <x0066660@xxxxxx>
• Re: [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH v3 08/11] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: "Gopinath, Thara" <thara@xxxxxx>
• [PATCH v6 8/8] Input: omap4 - pm runtime
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 7/8] OMAP4: Keyboard board support
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 5/8] Input: omap4 - Wake-up on events & long presses
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 6/8] OMAP4: Keyboard device registration
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 4/8] Input: omap4 - Interrupt line configuration
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 3/8] Input: omap4 - SYSCONFIG register configuration
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 2/8] Input: omap4 - use platform device helpers
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 1/8] OMAP4: hwmod data: add keyboard controller
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH v6 0/8] OMAP4 Keyboard Controller Support
  • From: Abraham Arce <x0066660@xxxxxx>
• [PATCH 2/3 v5] musb: add musb support for AM35x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v5] AM35x: Add musb support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/3 v5] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [Beagleboard] linux-omap-pm -- cpufreq query
  • From: Haribabu Narayanan <haribabu@xxxxxxxxxxx>
• Re: Compilation: omap-for-linus omap2plus error
  • From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
• Compilation: omap-for-linus omap2plus error
  • From: Abraham Arce <x0066660@xxxxxx>
• build error: omap_ctrl_readl and omap_ctrl_writel undefined
  • From: "S, Venkatraman" <svenkatr@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Hang on Suspend to RAM with 2.6.36-rc4
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/11] OMAP3: PM: Adding voltage driver support for OMAP3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Hang on Suspend to RAM with 2.6.36-rc4
  • From: Laine Walker-Avina <lwalkera@xxxxxxxxx>
• RE: [PATCH v2 03/10] OMAP: mach-omap2: Fix static function warnings
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v3 08/11] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/11] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 03/10] OMAP: mach-omap2: Fix static function warnings
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 02/11] OMAP3: PM: Adding voltage driver support for OMAP3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 05/13] OMAP: Introduce device specific set rate and get rate in device opp structures.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/2] OMAP2+: misc. defconfig cleanups for 2.6.37
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/3 v4] musb: AM35x: Workaround for fifo read issue
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 01/14] ARM: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• RE: [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH v3 07/11] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH v3 03/11] OMAP3: PM: Adding smartreflex driver support.
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH v2 04/11] OMAP4: Extend clock data.
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE : [omap3] Nand flash initialisation error
  • From: GERBER Patrick <Patrick.Gerber@xxxxxxxxxx>
• [omap3] Nand flash initialisation error
  • From: GERBER Patrick <Patrick.Gerber@xxxxxxxxxx>
• Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• RE: [PATCH 05/11] omap3: Remove non-existent config option
  • From: "Marathe, Yogesh" <yogesh_marathe@xxxxxx>
• RE: [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH 3/3 v4] musb: AM35x: Workaround for fifo read issue
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3 v4] musb: add musb support for AM35x
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/3 v4] AM35x: Add musb support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH 05/13] OMAP: Introduce device specific set rate and get rate in device opp structures.
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] OMAP:DSS: RFC Patch to add HDMI DSS driver support
  • From: Petr Štetiar <ynezz@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v2] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Silesh C V <silesh@xxxxxx>
• RE: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Thomas Renninger <trenn@xxxxxxx>
• [GIT PULL] ARM: l2x0: kexex, cleanup and optimisation for 2.6.37
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP: ZOOM2: Change GPIO to enable LCD NEC NL8048HL11-01B on OMAP34x-II MDP
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 2/9 v3] usb: musb: Remove board_data parameter from musb_platform_init()
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v4] usb: musb: Adding names for IRQs in resource structure
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v5 2/5] omap3: nand: prefetch in irq mode support
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Silesh C V <silesh@xxxxxx>
• RE: [PATCH 1/7] pwm: Add pwm core driver
  • From: Arun MURTHY <arun.murthy@xxxxxxxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH v8 0/6] OMAP: WDT: Implement WDT in hwmod way
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] OMAP3: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2] OMAP4 ES2: HSMMC soft reset change
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH v3 00/11] OMAP3: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/11] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v3 03/11] OMAP3: PM: Adding smartreflex driver support.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] OMAP4: Extend clock data.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] omap3: nand: prefetch in irq mode support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: RFC: mixing device idle and CPUidle or non-atomic idle notifiers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCHv2 1/1] omap2/3: Update revision identification
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH v4 2/4] omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omap: pandora: add fixed regulator for wlan
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: ZOOM2: Change GPIO to enable LCD NEC NL8048HL11-01B on OMAP34x-II MDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 08/13 v3] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/7] pwm: Add pwm core driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 1/2] omap: zoom2: Fix ASoC multi-component build breakage by removing dead code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: PM: CPUFREQ: Fix conditional compilation
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP2+: defconfig: modularize bluetooth, audio and WLAN
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] OMAP2+: defconfig: disable CPUfreq
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] OMAP2+: misc. defconfig cleanups for 2.6.37
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] for testing: OMAP hwmod driver conversions: watchdog, UART, i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH v2 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3 RESEND] arm: remove cast from void*
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap: Fix compile dependency to LEDS_CLASS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: add cpu_idle_wait() to support CPUidle on SMP systems.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9 v3] usb: musb: Adding names for IRQs in resource structure
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v4 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] pwm: Add pwm core driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] mfd: fix TWL4030 COR bit polarity for BCI SIH block
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 1/7] pwm: Add pwm core driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] pwm: Add pwm core driver
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Issue : jffs2 and ecc layout
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• RE: [PATCH 1/7] pwm: Add pwm core driver
  • From: Arun MURTHY <arun.murthy@xxxxxxxxxxxxxx>
• RE: [PATCH 3/7] leds: pwm: add a new element 'name' to platform data
  • From: Arun MURTHY <arun.murthy@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] leds: pwm: add a new element 'name' to platform data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 0/7] PWM core driver for pwm based led and backlight driver
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 3/7] leds: pwm: add a new element 'name' to platform data
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 4/7] pwm: Align existing pwm drivers with pwm-core driver
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 1/7] pwm: Add pwm core driver
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 2/7] backlight:pwm: add an element 'name' to platform data
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 6/7] pwm: move existing pwm driver to drivers/pwm
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 5/7] platform: Update the pwm based led and backlight platform data
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• [PATCH 7/7] pwm: Modify backlight and led Kconfig aligning to pwm core
  • From: Arun Murthy <arun.murthy@xxxxxxxxxxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] tracing, perf: add more power related events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v4 1/4] omap4 hsmmc: Adding card detect support for MMC1
  • From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9 v3] usb : musb: Using runtime pm apis for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3 RESEND] arm: remove cast from void*
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 0/6] omap3: Various fixes and improvements for IGEP v2 board.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] omap4: pandaboard: machine cleanups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] omap3: cm-t3517: add support for usb host.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Loïc Minier <lool@xxxxxxxx>
• Re: [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Loïc Minier <loic.minier@xxxxxxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL v2] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [GIT PULL v2] OMAP: clock/CM/PRM/SCM updates for OMAP4 ES2, OMAP3 CORE DVFS fix: for 2.6.37
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v3] OMAP1: Add support for SoC camera interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 9/9 v3] usb : musb: Offmode fix for idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH 05/11] omap3: Remove non-existent config option
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Arun Murthy <arunrmurthy.83@xxxxxxxxx>
• [PATCH v4 1/4] Adding LogicPD OMAP3 board support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v4 0/4] LogicPD minimal board support for LV_SOM and Torpedo
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v4 3/4] ARM: OMAP3: Add generic smsc911x support when connected to GPMC
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v4 2/4] ARM: OMAP3LOGIC: Adding SDMMC support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• [PATCH v4 4/4] ARM: OMAP3LOGIC: Added SMSC Ethernet board support
  • From: Tim Nordell <tim.nordell@xxxxxxxxxxx>
• Re: [PATCH 05/11] omap3: Remove non-existent config option
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [RFC 1/5] OMAP: mux: Add support for control module split in several partitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [QUESTION] How to enable runtime PM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH RFC:] FIX: OMAP3EVM: Ethernet controller smsc911x reset
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [GIT PULL] omap2 sparse fixes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH RFC:] FIX: OMAP3EVM: Ethernet controller smsc911x reset
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP2+: GPIO: move late PM out of interrupts-disabled idle path
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/13 v3] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 11/13 v3] serial: Add OMAP high-speed UART driver
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 12/13 v3] OMAP: SERIAL: Enable omap-serial driver in Kconfig
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 10/13 v3] OMAP3: serial: Fix uart4 handling for 3630
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 09/13 v3] OMAP3: PM: Add prepare idle and resume idle call for uart4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 08/13 v3] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 07/13 v3] OMAP clock: Add uart4_ick/fck definitions for 3630
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 06/13 v3] OMAP: UART: use non-locking versions of hwmod enable/idle functions
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 05/13 v3] OMAP: UART: don't do automatic bus-level suspend/resume
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 04/13 v3] OMAP2: UART: remove set_uart_globals
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 03/13 v3] OMAP: UART: omap_device converions, remove implicit 8520 assumptions
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 02/13 v3] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 01/13 v3] OMAP4: UART: Add uart1-4 hwmods data for omap4
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 00/13 v3] OMAP: Serial: Add omap-serial driver with platform support
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH v2 08/10] TWL IRQ: Fix fucntion declaration warnings
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] mfd: speedup twl4030 irq response time and decrease irq disable time
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4] power: introduce library for device-specific OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH RESEND v5 1/5] omap gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v5 2/5] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v5 3/5] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v5 0/5] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [GIT PULL] omap2 sparse fixes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH v5 5/5] omap: nand: making ecc layout as compatible with romcode ecc
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [linux-pm] runtime_pm_get_sync() from ISR with IRQs disabled?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>