Hello, Changes since v2: - remove multiple assignment Changes since v1: - Errata ID added to the comment (i541) Intro mail from v1: The following series fixes the sDMA FIFO drain issue present for OMAP2 and OMAP3, and covered by an errata. For OMAP2 the omap_start_dma had a comment about this errata, but the workaround configured wrong bit (CCR_EN instead of the correct BUFFERING_DISABLE bit). The first patch from Jarkko Nikula <jhnikula@xxxxxxxxx> fixes this. For OMAP3 the suggestion is to set sDMA to NoStandby before disabling the channel, and wait for the drain to finish, than configure sDMA to SmartStandby again. The second patch implements this workaround for OMAP3. The FIFO drain problem can be reproduced on both OMAP2 and OMAP3 while using audio (capture case): Either introduce load to the CPU: nice -19 arecord -D hw:0 -M -B 10000 -F 5000 -f dat > /dev/null & \ dd if=/dev/urandom of=/dev/null or suspending the arecord, and resuming it: arecord -D hw:0 -M -B 10000 -F 5000 -f dat > /dev/null CTRL+Z; fg; CTRL+Z; fg; ... On OMAP2 we can not recover from this problem. The board has to be rebooted, while OMAP3 can be recovered by reseting the sDMA channel, or introducing unrelated sDMA activity (which takes sDMA out from Standby - but this is not working all the time). PS: the same errata might exist for OMAP4, but we are not able to verify it. --- Jarkko Nikula (1): omap: dma: Fix buffering disable bit setting for omap24xx Peter Ujfalusi (1): OMAP3: DMA: Errata: sDMA FIFO draining does not finish arch/arm/plat-omap/dma.c | 38 ++++++++++++++++++++++++++++++-- arch/arm/plat-omap/include/plat/dma.h | 4 +++ 2 files changed, 39 insertions(+), 3 deletions(-) -- 1.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
