From: Sukumar Ghorai <s-ghorai@xxxxxx>
wires variable is renamed, extended and this single variable to be used to
pass the platform capabilities, e.g DDR mode. Also removed the hardcoded
value was using as bus-width.
Signed-off-by: Sukumar Ghorai <s-ghorai@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/board-2430sdp.c | 3 ++-
arch/arm/mach-omap2/board-3430sdp.c | 5 +++--
arch/arm/mach-omap2/board-4430sdp.c | 4 ++--
arch/arm/mach-omap2/board-cm-t35.c | 5 +++--
arch/arm/mach-omap2/board-devkit8000.c | 3 ++-
arch/arm/mach-omap2/board-igep0020.c | 5 +++--
arch/arm/mach-omap2/board-ldp.c | 3 ++-
arch/arm/mach-omap2/board-n8x0.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 3 ++-
arch/arm/mach-omap2/board-omap3evm.c | 3 ++-
arch/arm/mach-omap2/board-omap3pandora.c | 7 ++++---
arch/arm/mach-omap2/board-omap3stalker.c | 3 ++-
arch/arm/mach-omap2/board-omap3touchbook.c | 3 ++-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 5 +++--
arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++--
arch/arm/mach-omap2/board-zoom-peripherals.c | 5 +++--
arch/arm/mach-omap2/devices.c | 16 +++++++++-------
arch/arm/mach-omap2/hsmmc.c | 16 ++++++++++------
arch/arm/mach-omap2/hsmmc.h | 3 ++-
arch/arm/plat-omap/include/plat/mmc.h | 7 +++----
drivers/mmc/host/omap.c | 2 +-
drivers/mmc/host/omap_hsmmc.c | 18 ++----------------
23 files changed, 67 insertions(+), 61 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8538e41..fc178a0 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -19,6 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
@@ -190,7 +191,7 @@ static int __init omap2430_i2c_init(void)
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ext_clock = 1,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 67b95b5..3eb9839 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -24,6 +24,7 @@
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -353,12 +354,12 @@ static struct omap2_hsmmc_info mmc[] = {
/* 8 bits (default) requires S6.3 == ON,
* so the SIM card isn't used; else 4 bits.
*/
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9447644..e379bef 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -193,12 +193,12 @@ static struct omap_musb_board_data musb_board_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e10bc10..b72009a 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -31,6 +31,7 @@
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
@@ -579,14 +580,14 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.transceiver = 1,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a07086d..de5e2c2 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -28,6 +28,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -105,7 +106,7 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 175f043..f3f0280 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -20,6 +20,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -248,13 +249,13 @@ static struct regulator_init_data igep2_vmmc2 = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 00d9b13..58698e3 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -27,6 +27,7 @@
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -362,7 +363,7 @@ static int __init omap_i2c_init(void)
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8fd2269..7a93bd5 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -488,7 +488,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 87969c7..51493f5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -166,7 +167,7 @@ static void __init beagle_display_init(void)
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d9c0..523ba55 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -31,6 +31,7 @@
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -370,7 +371,7 @@ static struct regulator_init_data omap3evm_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index dd3af2b..2d2e6fc 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -32,6 +32,7 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <asm/mach-types.h>
@@ -276,14 +277,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
@@ -291,7 +292,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
},
{
.mmc = 3,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index bcd01d2..c1b881d 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -26,6 +26,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -275,7 +276,7 @@ static struct regulator_init_data omap3stalker_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 23,
},
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 663c62d..9ab18fd 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
#include <plat/mcspi.h>
#include <linux/spi/spi.h>
@@ -108,7 +109,7 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 96f5bbb..0bb2353 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -56,7 +56,7 @@ static struct omap_musb_board_data musb_board_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4c48436..93441e5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -32,6 +32,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -303,13 +304,13 @@ static void __init overo_flash_init(void)
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.transceiver = true,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a5eb87..a3dbaa7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -302,7 +302,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
@@ -311,7 +311,8 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "internal",
.mmc = 2,
- .wires = 8, /* See also rx51_mmc2_remux */
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ /* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b39849..e5eac46 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -155,14 +156,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
- .wires = 4,
+ .caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
},
{
.name = "internal",
.mmc = 2,
- .wires = 8,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index dc49c07..9e5d51b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -694,7 +694,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
- if (mmc_controller->slots[0].wires == 4) {
+ if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
@@ -722,8 +722,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
@@ -731,7 +731,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
@@ -755,8 +756,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
- if (mmc_controller->slots[0].wires == 4 ||
- mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
@@ -764,7 +765,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].wires == 8) {
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index c8f647b..87ce6ff 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -258,7 +258,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
"mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = hc->name;
mmc->nr_slots = 1;
- mmc->slots[0].wires = c->wires;
+ mmc->slots[0].caps = c->caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
@@ -316,16 +316,20 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
}
/* Omap3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() && c->wires > 4) {
- c->wires = 4;
- mmc->slots[0].wires = c->wires;
+ if (cpu_is_omap3630() &&
+ (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->slots[0].caps = c->caps;
}
break;
case 2:
if (c->ext_clock)
c->transceiver = 1;
- if (c->transceiver && c->wires > 4)
- c->wires = 4;
+ if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+ c->caps &= ~MMC_CAP_8_BIT_DATA;
+ c->caps |= MMC_CAP_4_BIT_DATA;
+ }
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 1fe6f01..281e972 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -10,7 +10,8 @@ struct mmc_card;
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
- u8 wires; /* 1/4/8 wires */
+ u32 caps; /* 4/8 wires and any additional host
+ * capabilities OR'd (ref. linux/mmc/host.h) */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 9b89ec6..4f819fc 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -73,10 +73,9 @@ struct omap_mmc_platform_data {
struct omap_mmc_slot_data {
- /* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
- * 8 wire signaling is also optional, and is used with HSMMC
- */
- u8 wires;
+ /* 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h) */
+ u32 caps;
/*
* nomux means "standard" muxing is wrong on this board, and
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index d98ddcf..a9d62cf 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
mmc->caps = 0;
- if (host->pdata->slots[id].wires >= 4)
+ if (host->pdata->slots[id].caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4526d27..53f8fa5 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2116,23 +2116,9 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- switch (mmc_slot(host).wires) {
- case 8:
- mmc->caps |= MMC_CAP_8_BIT_DATA;
- /* Fall through */
- case 4:
+ mmc->caps |= mmc_slot(host).caps;
+ if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- break;
- case 1:
- /* Nothing to crib here */
- case 0:
- /* Assuming nothing was given by board, Core use's 1-Bit */
- break;
- default:
- /* Completely unexpected.. Core goes with 1-Bit Width */
- dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!"
- "using 1 instead\n", mmc_slot(host).wires);
- }
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
