* Jarkko Nikula <jhnikula@xxxxxxxxx> [100820 04:55]: > On Thu, 19 Aug 2010 21:38:44 -0500 > Robert Nelson <robertcnelson@xxxxxxxxx> wrote: > > > Due to the omap3530 ES3.0 Silicon being used on both the > > B5/B6 and C1/2/3 Beagle we can't use the cpu_is_omap34xx() > > routines to differentiate the Beagle Boards. > > > > However gpio pins 171,172,173 where setup for this prupose, so > > lets use them. > > > > Changes: > > for older U-Boot's, use omap_mux_init_gpio() > > keep Beagle Rev in board-omap3beagle.c > > gpio_free on gpio request failure > > > > Tested on Beagle Revisions: B5, C2, C4, and xMA > > > > Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx> > > Cc: Jarkko Nikula <jhnikula@xxxxxxxxx> > > --- > > To this set: > > Acked-by: Jarkko Nikula <jhnikula@xxxxxxxxx> Adding all three. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
