Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] smsc911x: add disable and re-enable Rx int to de-assert interrupt pin
  • From: Jason Wang <jason77.wang@xxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH v5 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 05/12] staging:tidspbridge - set5 remove hungarian from structs
  • From: "Sapiens, Rene" <rene.sapiens@xxxxxx>
• [PATCH 4/4] OMAP4: hwmod data: Fix alignment and end of line in structure fields
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 3/4] OMAP4: hwmod data: Move the DMA structures
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 2/4] OMAP4: hwmod data: Move the smartreflex structures
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 1/4] OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflex sysc
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP USB Changes for Merge Window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Status of CONFIG_OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] smsc911x: add disable and re-enable Rx int to de-assert interrupt pin
  • From: David Miller <davem@xxxxxxxxxxxxx>
• RE: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Last OMAP4 hwmod data cleanup for 2.6.38
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• [PATCH] OMAP4: hwmod data: Fix SR flags, structures order and field alignment
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Last OMAP4 hwmod data cleanup for 2.6.38
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [PATCH] smsc911x: add disable and re-enable Rx int to de-assert interrupt pin
  • From: Jason Wang <jason77.wang@xxxxxxxxx>
• Re: [PATCH v1 02/10] OMAP: McBSP: Convert McBSP to platform device model
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH v1 00/10] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH 2/2] arm: omap: tusb6010: add name for MUSB IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] arm: omap: craneboard: Add USB EHCI support
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] OMAP USB Changes for Merge Window
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• linux-next: manual merge of the usb tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] omap: Board specific muxing using hwmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] omap2+: Use omap_device_board_data for platform level serial init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] omap2+: Add struct omap_device_board_data and allow omap_device_build initialize pads to mux
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] omap2+: Allow hwmod state changes to mux pads based on the state changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/6] omap2+: Add support for hwmod specific muxing of devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dspbridge: Fix atoi to support hexadecimal numbers correctly
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] dspbridge: Fix atoi to support hexadecimal numbers correctly
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH] OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Fix pm24xx.c compilation problem
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Fix pm24xx.c compilation problem
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] staging: tidspbridge: rmgr code cleanup
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP SmartReflex/voltage core for 2.6.38
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Fix pm24xx.c compilation problem
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] OMAP SmartReflex/voltage core for 2.6.38
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: fix typo in OMAP3_IVA_MASK
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: rx51: Remove tvout code that plays with gpio 40
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3: fix typo in OMAP3_IVA_MASK
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] staging: tidspbridge: rmgr/node.c code cleanup
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] staging: tidspbridge: use the right type for list_is_last
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [GIT PULL v3] OMAP: core/PM architecture: pull request for 2.6.38
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 8/8] OMAP4: clock data: Add missing fixed divisors
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL v2] OMAP: core/PM architecture: pull request for 2.6.38
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v1 00/10] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Huge ubi or ubifs sync slowdown since 2.6.32
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 0/9] TI DMM-TILER driver
  • From: David Sin <davidsin@xxxxxx>
• Re: [PATCH] omap: rx51: Remove tvout code that plays with gpio 40
  • From: Srikar <ext-srikar.1.bhavanarayana@xxxxxxxxx>
• Re: [PATCH 2/2] enabled vdda_dac regulator support tvout on rx51
  • From: Srikar <ext-srikar.1.bhavanarayana@xxxxxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 05/17] OMAP2,3 DSS Driver register moved to mach_omap2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH v2 05/17] OMAP2,3 DSS Driver register moved to mach_omap2
  • From: "Guruswamy, Senthilvadivu" <svadivu@xxxxxx>
• RE: [PATCH v2 04/17] OMAP2420,OMAP2430,OMAP3xx: change dss driver name in clock files
  • From: "Guruswamy, Senthilvadivu" <svadivu@xxxxxx>
• Re: [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] omap: rx51: Remove tvout code that plays with gpio 40
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 1/7] omap3630: nand: fix device size to work in polled mode
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCHv3] OMAP3: SDRC : Add comments on Errata i520 for Global SW reset
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH 2/7] omap3: nand: configurable transfer type per board
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• RE: [PATCH v6 0/7] nand prefetch-irq support and ecc layout chanage
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [GIT PULL] OMAP: core/PM architecture: pull request for 2.6.38
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP4: clocks: add dummy clock for mailbox
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 13/14] OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] OMAP3&4: Fixes in setup/suspend/powerdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] OMAP4: Pandaboard: Fix MMC card detect gpio line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: Devkit8000: Add DEBUG_LL support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP3: clocks: Update clock domain name for mcspi fck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 0/6] OMAP: hwmod core fix and cleanup for 2.6.38
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 0/7] OMAP4: hwmod data fixes and update
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] OMAP OPP support for 2.6.38
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] misc. OMAP PM core updates for 2.6.38
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] OMAP2+: io: split omap2_init_common_hw()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] OMAP: wd_timer: remove old, dead probing code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] omap3: beagle: get rid of unused omap2/omap4 specific code/data
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP: DMA: clear interrupt status correctly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add 104MHz support for OMAP OneNAND
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] OMAP2/3: OneNAND: add 104MHz support
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 1/2] OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanoseconds
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• [PATCH 0/2] Add 104MHz support for OMAP OneNAND
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] omap3: beagle: get rid of unused omap2/omap4 specific code/data
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] omap3: beagle: get rid of unused omap2/omap4 specific code/data
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] omap4: mark some data as omap4-specific
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] omap3: mark some data as omap3-specific
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] omap: add macros to mark SoC-specific data/code
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [RFC] Infrastructure for dynamic removal of code and data sections
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH] GPIO chip select support for McSPI
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• [PATCH] omap: rx51: Remove tvout code that plays with gpio 40
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: UBIFS not mounting on linux-omap 2.6.36
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH 2/2] omap: rx51: Add vdda_dac supply for tvout
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/2] omap: rx51: Cleanup vdds_sdi supply construction
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 0/2] omap: rx51: Fix broken fb on RX51/N900
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 0/6] omap: Board specific muxing using hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [alsa-devel] [RFC/PATCH v6 03/12] media: Entities, pads and links
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• OMAP3 ISP suspend/resume question
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v2] OMAP4: Pandaboard: Fix MMC card detect gpio line
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 06/17] OMAP2,3 board files DSS Driver register moved to devices.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH v2 05/17] OMAP2,3 DSS Driver register moved to mach_omap2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH v2 04/17] OMAP2420,OMAP2430,OMAP3xx: change dss driver name in clock files
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: musb (omap3) as host fails with reconnecting devices
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH] OMAP3: Devkit8000: Add DEBUG_LL support
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [PATCH v2] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH] OMAP2: Devkit8000: Use _cansleep GPIO functions for display reset lines
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [PATCH v1 10/10] OMAP: McBSP: Add pm runtime support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 09/10] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 07/10] OMAP3: hwmod: add dev_attr for McBSP sidetone
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 00/10] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 05/10] OMAP3: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 06/10] OMAP4: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 08/10] OMAP2+: McBSP: hwmod adaptation for McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 02/10] OMAP: McBSP: Convert McBSP to platform device model
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 04/10] OMAP2430: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 03/10] OMAP2420: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 01/10] OMAP: hwmod: Add member 'name' to omap_hwmod_addr_space struct
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 2/2] OMAP: omap_device: API to modify AUTOIDLE and SMARTIDLE bits
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 1/2] OMAP: hwmod: API to handle autoidle mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 0/2] OMAP: omap_device: API to modify SYSCONFIG register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [Patch v5] AM35xx: Craneboard: Add USB EHCI support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT] pull request: DMA hwmod changes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [GIT] pull request: DMA hwmod changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: "Guruswamy, Senthilvadivu" <svadivu@xxxxxx>
• Re: [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] adding gpmc configuration functions, west bridge related
  • From: Sutharsan R <sutharsan.ram@xxxxxxxxx>
• Re: [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [GIT] pull request: DMA hwmod changes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: pandora: fix wifi support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] omap: rx51: Switch rx51_tpa6130a2_data __initdata to __initdata_or_module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Debugging failure to get MMC2 IRQ 86
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Huge ubi or ubifs sync slowdown since 2.6.32
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• [PATCH] staging: tidspbridge: remove code referred by OPT_ZERO_COPY_LOADER
  • From: Ernesto Ramos <ernesto@xxxxxx>
• [PATCH v3] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v5 3/7] OMAP3: pm: introduce errata handling
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 0/7] OMAP: idle path errata fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] staging: tidspbridge: protect dmm_map properly
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/2] staging: tidspbridge: fix dma race condition
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v5 2/5] OMAP4: Adding voltage driver support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v5 1/5] OMAP4: Register voltage PMIC parameters with the voltage layer
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v5 0/5] OMAP4: Smartreflex and Voltage layer support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v5 5/5] OMAP4: Smartreflex framework extensions
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v5 4/5] OMAP4: hwmod: Add inital data for smartreflex modules.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v5 3/5] OMAP4: PM: Program correct init voltages for scalable VDDs
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 03/10] OMAP3: PM: Adding smartreflex driver support.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 08/10] OMAP3: PM: Register TWL4030 pmic info with the voltage driver.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 10/10] OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 05/10] OMAP3: PM: Adding smartreflex hwmod data
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 06/10] OMAP3: PM: Adding smartreflex class3 driver
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 02/10] OMAP: Introduce voltage domain information in the hwmod structures
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 04/10] OMAP3: PM: Adding smartreflex device file.
  • From: Thara Gopinath <thara@xxxxxx>
• [PATCH v6 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Thara Gopinath <thara@xxxxxx>
• Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: "Taneja, Archit" <archit@xxxxxx>
• Re: [RFC PATCHv4 2/7] HSI: omap_ssi: Introducing OMAP SSI driver
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCHv2] OMAP: pm.c correct the initcall for an early init.
  • From: Thara Gopinath <thara@xxxxxx>
• Re: [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Re: [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 3/7] omap3: pm: introduce errata handling
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] staging: tidspbridge: fix dma race condition
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/2] staging: tidspbridge: extend dmm_map semaphore
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 1/2] staging: tidspbridge: convert dmm_map_lock to sema
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 3/7] DSPBRIDGE: do not call follow_page
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• RE: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [Patch v5] AM35xx: Craneboard: Add USB EHCI support
  • From: srinath@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 6/9] OMAP4: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH v2 6/9] OMAP4: hwmod data: add system DMA
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• [PATCH v7 5/12] OMAP4: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 1/12] OMAP2+: dmtimer: add device names to flck nodes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 3/12] OMAP2430: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 6/12] OMAP1: dmtimer: conversion to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 8/12] OMAP: dmtimer: platform driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 7/12] OMAP2+: dmtimer: convert to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 11/12] OMAP: dmtimer: add timeout to low-level routines
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 10/12] OMAP: dmtimer: pm_runtime support
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 4/12] OMAP3: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 9/12] OMAP: dmtimer: switch-over to platform device driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 2/12] OMAP2420: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v7 0/12] dmtimer adaptation to platform_driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [GIT] pull request: DMA hwmod changes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] omap3: pm: introduce errata handling
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] OMAP: idle path errata fixes
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7 v6] OMAP3: clean up ASM sleep code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Abdoulaye Walsimou GAYE <awg@xxxxxxxxxxxxxx>
• RE: [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Abraham Arce <abraham.arce.moreno@xxxxxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Is changing serial from /dev/ttySx to /dev/ttyOx a good idea?
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH 0/13] 64-bit sched_clock
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] omap: pandora: fix wifi support
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 0/13] 64-bit sched_clock
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• UBIFS not mounting on linux-omap 2.6.36
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/3] omap3 nand: cleanup virtual address usages
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/7] nand prefetch-irq support and ecc layout chanage
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH] MTD: NAND: ams-delta: drop omap_read/write, use ioremap
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] MTD: NAND: ams-delta: select for built-in by default
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Koen Kooi <koen.kooi@xxxxxxxxx>
• Re: [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [GIT] pull request: DMA hwmod changes
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 0/7 v6] OMAP3: clean up ASM sleep code
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 4/7] OMAP3630: PM: Erratum i608: disable RTA
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 0/7] OMAP: idle path errata fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 3/7] omap3: pm: introduce errata handling
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCHv2] omap: rx51: Switch rx51_tpa6130a2_data __initdata to __initdata_or_module
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] omap2+: Initialize serial ports for wake-up events for n8x0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] omap4: l2x0 fixes and cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 0/7 v5] OMAP3: clean up ASM sleep code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 0/7 v6] OMAP3: clean up ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 6/7] OMAP3: add comments for low power code errata
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v2] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 01/11] OMAP4: PRCM: add OMAP4-specific accessor/mutatorfunctions
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 resend] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH] OMAP1: clock_data: use runtime cpu / machine checks
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [GIT PULL] OMAP: mailbox and iommu changes: for-next for v2.6.38
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] omap4: Add platform changes for PWM LED
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] omap4: Add platform changes for Ambient Light sensor
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] omap3: igepv2: LED gpio-led:green:d1 is active low
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] omap3: igepv2: Don't call gpio_set_value right aftergpio_direction_output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] omap1: Fix innovator FPGA init for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Misc omap board patches for v2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 resend] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap1: pm_bus: Fix compilation warning.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] I2C: i2c-omap: Change device name: i2c_omap -> omap_i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: remove dead wdt code in plat-omap/devices.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] omap2430: hwmod: remove stray declaration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESEND] [PATCH 3/3] omap4: Platform changes for CMA3000 Accelerometer driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] omap4: Add platform changes for Ambient Light sensor
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP4: enable smc instruction in new assembler versions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP4: enable smc instruction in new assembler versions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: kill all section mismatch warning for omap2plus_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP: kill all section mismatch warning for
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] OMAP: PM noop: implement context loss count for non-omap_devices
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] OMAP: PM: implement context loss count APIs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP2+: powerdomain: add API to get context loss count
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: add comments for erratas i540 and i478 workarounds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Added video data to support tvout on rx51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCHv4 2/7] HSI: omap_ssi: Introducing OMAP SSI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] omap: rx51: Remove __initdata from rx51_tpa6130a2_data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 0/12] dmtimer adaptation to platform_driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/7] omap3: nand: configurable transfer type per board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/7] omap3630: nand: fix device size to work in polled mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MTD: NAND: ams-delta: drop omap_read/write, use ioremap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7 v5] OMAP3: clean up ASM sleep code
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/7 v5] OMAP3: clean up ASM sleep code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7 v5] OMAP3: clean up ASM sleep code
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Keyboard: omap-keypad: use matrix_keypad.h
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [OMAP 1710] Mainline Broken
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: Fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH 3/3] omap: rx51: Add supplies and data for codec b part of TLV320AIC34
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 2/3] omap: rx51: Remove extra tlv320aic3x.h inclusion
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/3] omap: rx51: Remove __initdata from rx51_tpa6130a2_data
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] OMAP4: Pandaboard: Fixing MMC card detect gpio line
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP4: Pandaboard: Fixing MMC card detect gpio line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP4: Pandaboard: Add omap_reserve functionality
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH] OMAP4: Pandaboard: Fixing MMC card detect gpio line
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 6/7] OMAP3: add comments for low power code errata
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2 9/9] OMAP: DMA: Convert DMA library into platform driver
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 8/9] OMAP2+: DMA: hwmod: Device registration
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 7/9] OMAP1: DMA: Implement in platform device model
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 6/9] OMAP4: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 4/9] OMAP2430: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 5/9] OMAP3: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 3/9] OMAP2420: hwmod data: add system DMA
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 2/9] OMAP: DMA: Introduce errata handling feature
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 0/9] OMAP: DMA: hwmod and DMA as platform device
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v2 1/9] OMAP: DMA: Replace read/write macros with functions
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v2]: OMAP: DSS2: Adding check_timings and set_timings for panel-taal
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• Re: [PATCHv5 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] OMAP: GPIO: Correct IP version message during boot
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 4/7] OMAP3: re-organize the ASM sleep code
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] OMAP3: clocks: Update clock domain name for mcspi fck
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [OMAP 1710] Mainline Broken
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [Patch v4] AM35xx: Craneboard: Add USB EHCI support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: twl4030_usb porting advice
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: mach-omap2: Kconfig: devkit8000 should select needed options
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 37/40] ARM: omap: convert sched_clock() to use new infrastructure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 26/40] ARM: ensure all sched_clock() implementations are notrace marked
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 11/40] ARM: omap: update clock source registration
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCHv5 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: "Gopinath, Thara" <thara@xxxxxx>
• [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] omap: prcm: switch to a chained IRQ handler mechanism
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: twl4030_usb porting advice
  • From: Tomasz Mloduchowski <tomasz.mloduchowski@xxxxxxxxx>
• RE: [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 6/7] OMAP3: add comments for low power code errata
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/7] OMAP3: re-organize the ASM sleep code
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 0/7 v4] OMAP3: clean up ASM sleep code
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/7 v4] OMAP3: clean up ASM sleep code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: twl4030_usb porting advice
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 6/7] OMAP3: add comments for low power code errata
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 0/7 v5] OMAP3: clean up ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• RE: OMAP:DSS: possible bug in WAITFOR_VSYNC ioctl
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v4 2/2] OMAP_VOUT: Create separate file for VRFB related API's
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH v4 1/2] OMAP_VOUT: CLEANUP: Move some functions and macros from omap_vout
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [OMAP 1710] Mainline Broken
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: twl4030_usb porting advice
  • From: Tomasz Mloduchowski <tomasz.mloduchowski@xxxxxxxxx>
• [PATCH v4 2/2] OMAP_VOUT: Create separate file for VRFB related API's
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v4 1/2] OMAP_VOUT: CLEANUP: Move some functions and macros from omap_vout
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH v4 0/2] OMAP_VOUT: Allow omap_vout to build without VRFB
  • From: Archit Taneja <archit@xxxxxx>
• RE: [PATCHv5 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [Patch v4] AM35xx: Craneboard: Add USB EHCI support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Section mismatch warnings 2.6.37-rc6
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• RE: [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 0/7 v4] OMAP3: clean up ASM sleep code
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Section mismatch warnings 2.6.37-rc6
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Section mismatch warnings 2.6.37-rc6
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: [PATCHv5 00/10] OMAP: Adding Smartreflex and Voltage driver support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/5] staging:tidspbridge - Audit headers file
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 2/5] staging:tidspbridge - Remove unused functions
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 1/5] staging:tidspbridge - Remove unused defined constants
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 3/5] staging:tidspbridge - Remove unused structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 5/5] staging:tidspbridge - Remove trivial header files
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 4/5] staging:tidspbridge - Remove unused typedefs
  • From: Armando Uribe <x0095078@xxxxxx>
• Re: [PATCHv5 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] adding gpmc configuration functions, west bridge related
  • From: Sutharsan <srmt@xxxxxxxxxxx>
• Section mismatch warnings 2.6.37-rc6
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 0/9] TI DMM-TILER driver
  • From: Dave Airlie <airlied@xxxxxxxxx>
• Re: [PATCH] dspbridge: Fix atoi to support hexadecimal numbers correctly
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP1: clock_data: use runtime cpu / machine checks
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: What is the purpose of the different linux omap branches?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• OMAP NAND redux
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: BeagleBoard hangs at Bluetooth subsystem startup with 2.6.37-rc6 mainline
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: BeagleBoard hangs at Bluetooth subsystem startup with 2.6.37-rc6 mainline
  • From: Nishanth Menon <nm@xxxxxx>
• What is the purpose of the different linux omap branches?
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• BeagleBoard hangs at Bluetooth subsystem startup with 2.6.37-rc6 mainline
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: pm-core broken
  • From: Nishanth Menon <nm@xxxxxx>
• Re: BeagleBoard stops at booting kernel with 2.6.37-rc5
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: BeagleBoard stops at booting kernel with 2.6.37-rc5
  • From: David Anders <x0132446@xxxxxx>
• Re: BeagleBoard stops at booting kernel with 2.6.37-rc5
  • From: Nishanth Menon <nm@xxxxxx>
• Re: BeagleBoard stops at booting kernel with 2.6.37-rc5
  • From: Robert Nelson <robertcnelson@xxxxxxxxx>
• BeagleBoard stops at booting kernel with 2.6.37-rc5
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: pm-core broken
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] Fix rounding in clocks_calc_mult_shift()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5 v3] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [ANNOUNCE] Public x-loader git tree
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 0/9] TI DMM-TILER driver
  • From: David Sin <davidsin@xxxxxx>
• Re: pm-core broken
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7 v4] OMAP3: clean up ASM sleep code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] OMAP3: clean up ASM idle code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: pm-core broken
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 7/7] OMAP3: ASM sleep code format rework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 6/7] OMAP3: add comments for low power code errata
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/7] OMAP3: rework of the ASM sleep code execution paths
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/7] OMAP3: re-organize the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/7] OMAP3: remove hardcoded values from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/7] OMAP2+: use global values for the SRAM PA addresses
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/7] OMAP3: remove unused code from the ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 0/7 v4] OMAP3: clean up ASM sleep code
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 0/9] TI DMM-TILER driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] OMAP: RM-680: fix omap2_init_common_hw compile break
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>