On 12/17/2010 4:39 PM, G, Manjunath Kondaiah wrote:
From: Benoit Cousson<b-cousson@xxxxxx>
Add OMAP4 DMA hwmod data
Signed-off-by: Benoit Cousson<b-cousson@xxxxxx>
Signed-off-by: G, Manjunath Kondaiah<manjugk@xxxxxx>
It will be good to explicitly list the changes you did compared to the
original generated version. Even if these are some minor changes.
I thought it was the original patch and it appears it is not the case :-(
The general minor commestic comment is you should try to keep the
original order of the structures. That does not changes anything, but
that will keep the file in sync with the generated one.
Tested-by: Kevin Hilman<khilman@xxxxxxxxxxxxxxxxxxx>
Acked-by: Kevin Hilman<khilman@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 101 ++++++++++++++++++++++++++++
1 files changed, 101 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d258936..50c00d6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -23,6 +23,7 @@
#include<plat/omap_hwmod.h>
#include<plat/cpu.h>
#include<plat/gpio.h>
+#include<plat/dma.h>
#include "omap_hwmod_common_data.h"
@@ -36,6 +37,7 @@
#define OMAP44XX_DMA_REQ_START 1
/* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dma_system_hwmod;
static struct omap_hwmod omap44xx_dmm_hwmod;
static struct omap_hwmod omap44xx_emif_fw_hwmod;
static struct omap_hwmod omap44xx_l3_instr_hwmod;
@@ -216,6 +218,14 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* dma_system -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
+ .master =&omap44xx_dma_system_hwmod,
+ .slave =&omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_cfg -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
.master =&omap44xx_l4_cfg_hwmod,
@@ -227,6 +237,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
/* l3_main_2 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
&omap44xx_l3_main_1__l3_main_2,
+ &omap44xx_dma_system__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
};
@@ -1376,6 +1387,93 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
+
+/*
+ * 'dma' class
+ * dma controller for data exchange between memory to memory (i.e. internal or
+ * external memory) and gp peripherals to memory or memory to gp peripherals
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
A new flag was introduce in 2.6.37 to handle properly the softreset
(SYSS_HAS_RESET_STATUS). You should use it otherwise the reset might not
work properly. The generated hwmod data was updated accordingly at that
time (git://gitorious.org/omap-pm/linux.git hwmods-omap4-full)
Here are the proper data:
+static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields =&omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
+ .name = "dma",
+ .sysc =&omap44xx_dma_sysc,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = {
+ { .name = "0", .irq = 12 + OMAP44XX_IRQ_GIC_START },
+ { .name = "1", .irq = 13 + OMAP44XX_IRQ_GIC_START },
+ { .name = "2", .irq = 14 + OMAP44XX_IRQ_GIC_START },
+ { .name = "3", .irq = 15 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
+ {
+ .pa_start = 0x4a056000,
+ .pa_end = 0x4a0560ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
+ &omap44xx_dma_system__l3_main_2,
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
+ .master =&omap44xx_l4_cfg_hwmod,
+ .slave =&omap44xx_dma_system_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dma_system_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_dma_system_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
+ &omap44xx_l4_cfg__dma_system,
+};
+
+static struct omap_hwmod omap44xx_dma_system_hwmod = {
+ .name = "dma_system",
+ .class =&omap44xx_dma_hwmod_class,
+ .mpu_irqs = omap44xx_dma_system_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dma_system_irqs),
+ .main_clk = "l3_div_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_dma_system_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
+ .masters = omap44xx_dma_system_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
+ .dev_attr =&dma_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+ .flags = HWMOD_NO_IDLEST,
That one is wrong! It was the case on OMAP 2& 3, but we do have an
IDLEST on OMAP4.
TRM vM page 958: Table 3-1210. CM_SDMA_SDMA_CLKCTRL.IDLEST
It might not work, but that's another story. Why did you add that?
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
