Koen Kooi <koen.kooi@xxxxxxxxx> writes:
> Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxx>
-ENO_DESCRIPTIVE_CHANGELOG
Also, please Cc linux-arm-kernel for patches intended for upstream.
Thanks,
Kevin
> ---
>
> Changes since v1:
> * Reenable the PMU stat LED
>
> arch/arm/mach-omap2/board-omap3beagle.c | 26 ++++++++++++++++++++++++--
> 1 files changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index f1a8ede..4756ac7 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -297,13 +297,35 @@ static int beagle_twl_gpio_setup(struct device *dev,
> gpio_request(gpio + 1, "EHCI_nOC");
> gpio_direction_input(gpio + 1);
>
> - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
> + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
> + * high / others active low) */
> gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
> - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
> + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
> + else
> + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> +
> + /* DVI reset GPIO is different between revisions */
> + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
> + beagle_dvi_device.reset_gpio = 129;
> + else
> + beagle_dvi_device.reset_gpio = 170;
> +
> + /* Power on DVI, Serial and PWR led */
> + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
> + gpio_request(gpio + 1, "nDVI_PWR_EN");
> + gpio_direction_output(gpio + 1, 0);
> + }
>
> /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
>
> + /* Power on camera interface on P7/P8 or DVI on A2 and beyond */
> + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
> + gpio_request(gpio + 2, "CAM_EN");
> + gpio_direction_output(gpio + 2, 1);
> + }
> +
> return 0;
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
