For some reason the wakeup enable bit is not getting set on OMAP2430,
OMAP2420. This is inspite of the fact that SYSC_HAS_ENAWAKEUP flag is
present in the hwmod database.
I am not sure if there is already a patch to fix this problem. Until the
reason is found we need this patch to boot on the above platforms.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
---
arch/arm/plat-omap/dmtimer.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index f4aa4a1..007b754 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -227,6 +227,7 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
+ u32 l;
struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
if (!pdata->is_omap16xx) {
@@ -243,6 +244,18 @@ static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
if (pdata->dm_timer_reset)
pdata->dm_timer_reset(timer);
+ /*
+ * Enable wake-up on OMAP2420, OMAP2430 CPUs.
+ * FIXME: SYSC_HAS_ENAWAKEUP flag is already set in hwmod database.
+ * But the setting does not seem to work. Need to investigate why
+ * this is happening.
+ */
+ if (cpu_is_omap2430() || cpu_is_omap2420()) {
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
+ l |= 1 << 2;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+ }
+
omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
/* Match hardware reset default of posted mode */
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
