From: Raghuveer Murthy <raghuveer.murthy@xxxxxx> commit bf56f0a6668cd (2.6.37-rc1), from Nishanth Menon attempted to fix card detection for PandaBoard, unfortunately, the fix missed to initialize .gpio_cd member of omap2_hsmmc_info. This results in a default value of '0', which is a valid GPIO line. On PandaBoard, the side effect of this is that GPIO line 0 controls the powering TFP410 DVI chip, and without the fix DVI chip is inadvertently powered. Tested-by: David Anders <x0132446@xxxxxx> Acked-by: Nishanth Menon <nm@xxxxxx> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> Signed-off-by: Raghuveer Murthy <raghuveer.murthy@xxxxxx> --- v2: updated comment description to point out the potential regression. it might be nice to have this in .37 rc cycle as the change was introduced in .37-rc1, however, the DVI functionality(which is impacted as a side effect) is not enabled in .37 rc. v1: http://marc.info/?t=129172419600002&r=1&w=2 arch/arm/mach-omap2/board-omap4panda.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1ecd0a6..da24745 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -142,6 +142,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_wp = -EINVAL, + .gpio_cd = -EINVAL, }, {} /* Terminator */ }; -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
