Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v2 3/4] OMAP4: hwmod: add entries for DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: mux: fix buffer overrun
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
• [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 3/3] omap3: beaglexm: power on DVI
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 2/3] omap3: beaglexm: fix DVI reset GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: "Coley, Gerald" <g-coley1@xxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] PM: fix suspend_set_ops() to take const pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] ARM: OMAP: Power on EHCI, serial, camera and DVI on beagleboard-xM
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Nishanth Menon <nm@xxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Mika Westerberg <mika.westerberg@xxxxxx>
• Re: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Current OMAP build failures
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Current OMAP build failures
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Windows on OMAP
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Current OMAP build failures
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Current OMAP build failures
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: More LDP stuff
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probewhen!CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Brad Parker <brad@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: Nishanth Menon <nm@xxxxxx>
• More LDP stuff
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RFBI worked example
  • From: Ben Tucker <btucker@xxxxxxxxxxx>
• Re: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when!CONFIG_RUNTIME_PM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: linux-next: manual merge of the usb tree with the omap tree
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• RE: Errors when building for omap4 only
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2 3/4] OMAP4: hwmod: add entries for DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v2 2/4] ASoC: DMIC codec: Adding a generic DMIC codec
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v2 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v2 0/4] Adding OMAP DMIC driver to kernel
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v2 4/4] OMAP4: DMIC: Add DMIC codec platform devices
  • From: David Lambert <dlambert@xxxxxx>
• RE: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Errors when building for omap4 only
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• LCD driver
  • From: kalyan Alle <kalyan.alle@xxxxxxxxx>
• RE: Errors when building for omap4 only
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• OMAP3 and OMAP4 M-Shield Mobile Security Technology with linux-omap
  • From: Aleksandar Lazic <al-linuxomap@xxxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
• Errors when building for omap4 only
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Richard Purdie <richard.purdie@xxxxxxxxxxxxxxxxxxx>
• RE: Current OMAP build failures
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: <aaro.koskinen@xxxxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Current OMAP build failures
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v3 09/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [PATCH v8 6/11] OMAP1: dmtimer: conversion to platform devices
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [RESEND #2] [PATCH v2] LEDS: Add output invertion option to backlight trigger
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table
  • From: shweta.gulati@xxxxxx
• RE: [PATCH v8 4/11] OMAP3: hwmod data: add dmtimer
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Keerthy <j-keerthy@xxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when!CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/2] omap2 nand: Align subpage reads.
  • From: Charles Manning <cdhmanning@xxxxxxxxx>
• [PATCH 1/2] mtd: Add nand_base feature to align subpage read buffers
  • From: Charles Manning <cdhmanning@xxxxxxxxx>
• [PATCH 0/2] Add optional mtd nand alignment for subpage reading
  • From: Charles Manning <cdhmanning@xxxxxxxxx>
• Re: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v8 4/11] OMAP3: hwmod data: add dmtimer
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP3+: sr_device: include pm header
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] PM: fix suspend_set_ops() to take const pointer
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH v8 6/11] OMAP1: dmtimer: conversion to platform devices
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCHv2] staging: tidspbridge: configure full L1 MMU range
  • From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
• [PATCH 1/2] omap3|4: opp: make omapx_opp_init non-static
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] OMAP3: Beagle: enable 800MHz for xm
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: tidspbridge - configure full L1 MMU range
  • From: "Guzman Lugo, Fernando" <fernando.lugo@xxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• [PATCH 0/2] tools, perf: new power trace API
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/2] tools, perf: Documentation for the power events API
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/2] perf: add calls to suspend trace point
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH] staging: tidspbridge - configure full L1 MMU range
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 3/3] OMAP4: DSS2: Add hwmod device names for OMAP4.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 2/3] OMAP4: hwmod data: add DSS DISPC DSI1,2 RFBI HDMI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 1/3] OMAP2PLUS: DSS2: Add OMAP4 support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 3/3] OMAP2PLUS: DSS2: Generalize external clock names in struct dss of dss.c
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 2/3] OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 1/3] OMAP2PLUS: opt-clocks: align dss clock roles and names
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH 0/3] OMAP2PLUS: DSS: Generalize clock names
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH 2/2] OMAP: DMA: clear interrupt status correctly
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/5] omap2plus: Trivial build break fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/4] arm: omap: gpio: don't access irq_desc array directly
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] arm: mach-omap2: mux: fix buffer overrun
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH] OMAP: Cpufreq: Clean up to support multi omap builds
  • From: Thara Gopinath <thara@xxxxxx>
• Re: [PATCH v3 12/17] OMAP2,3: DSS2: RFBI Move init,exit to driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• OMAP DVFS rebase
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH v3 09/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: OMAP4 panda gets stuck during reboot
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/5] OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 4/5] OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/5] Clockdomain split series
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 5/5] OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/5] OMAP: clockdomain: Infrastructure to put arch specific code
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: OMAP4 panda gets stuck during reboot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: OMAP4 panda gets stuck during reboot
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: OMAP4 panda gets stuck during reboot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register
  • From: Felipe Balbi <balbi@xxxxxx>
• OMAP4 panda gets stuck during reboot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register(v1)
  • From: tom.leiming@xxxxxxxxx
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: "Lambert, David" <dlambert@xxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH v8 7/11] OMAP2+: dmtimer: convert to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 6/11] OMAP1: dmtimer: conversion to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 1/11] OMAP2+: dmtimer: add device names to flck nodes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 11/11] OMAP: dmtimer: add timeout to low-level routines
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 9/11] OMAP: dmtimer: switch-over to platform device driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 10/11] OMAP: dmtimer: pm_runtime support
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 8/11] OMAP: dmtimer: platform driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 5/11] OMAP4: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 3/11] OMAP2430: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 4/11] OMAP3: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 2/11] OMAP2420: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• RE: [PATCH v2 5/5] omap2plus: voltage: Trivial linking fix for'EINVAL' undeclared
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [PATCH 0/5] omap2plus: Trivial build break fixes
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 3/5] omap2plus: voltage: Trivial warning fix 'no return statement'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v3 06/17] OMAP2,3 DSS2 Move DSS driver register from board file to devices.c
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH v3 06/17] OMAP2,3 DSS2 Move DSS driver register from board file to devices.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: tidspbridge - configure full L1 MMU range
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/2] OMAP: DMA: clear interrupt status correctly
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• RE: [PATCH 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] arm: omap: gpio: don't access irq_desc array directly
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] staging: tidspbridge - configure full L1 MMU range
  • From: Fernando Guzman Lugo <fernando.lugo@xxxxxx>
• Re: [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH 5/5] omap2+: pm_bus: make functions used as pointers as static
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/5] omap2plus: Trivial build break fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] arm: omap: gpio: don't access irq_desc array directly
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v3 06/17] OMAP2,3 DSS2 Move DSS driver register from board file to devices.c
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] omap: Start using CONFIG_SOC_OMAP (Re: [PATCH v3 1/4] TI816X: Update common omap platform files)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] OMAP2+: trivial sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/5] omap2+: pm_bus: make functions used as pointers as static
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/5] omap3|4: mux: make local structures static
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/5] omap2+: wdt: trivial sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/5] omap3: igep3: make igep3_flash_init static
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/5] omap3: zoom: use static for pointer passing
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 3/5] omap2plus: voltage: Trivial warning fix 'no return statement'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] omap2plus: voltage: Trivial warning fix 'no return statement'
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 5/5] omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/5] omap2plus: Trivial build break fixes
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/5] omap2plus: voltage: Trivial linking fix 'undefined reference'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/5] omap2plus: voltage: Trivial warning fix 'no return statement'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: I2C Touchscreen OMAP OOPS
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: I2C Touchscreen OMAP OOPS
  • From: "David Lynch Jr." <dhlii@xxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register
  • From: tom.leiming@xxxxxxxxx
• [PATCH v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 5/7] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 7/7] omap3: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 6/7] omap3: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 4/7] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 1/7] omap3630: nand: fix device size to work in polled mode
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 0/7] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v8 2/7] omap3: nand: configurable transfer type per board
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v3 07/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v3 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 4/4] arm: Kconfig: allow OMAP to use sparse IRQ numbering
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/4] arm: Kconfig: remove duplicated SPARSE_IRQ entry
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] arm: omap: gpio: don't access irq_desc array directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] ARM IRQ Changes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2] OMAP2+: fix incorrect computation of autoidle_mask
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: "Pihet-XID, Jean" <j-pihet@xxxxxx>
• [PATCH 2/3] perf: add OMAP support for the new power events
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/3] perf: add calls to suspend trace point
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH 1/3] perf: add calls to suspend trace point
  • From: Ingo Molnar <mingo@xxxxxxx>
• Re: [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3] perf: add calls to suspend trace point
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 0/3] perf, tools: new power trace API
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/3] tools, perf: Documentation for the power events API
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/3] perf: add OMAP support for the new power events
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/10] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 2/2] arm: omap: select HAVE_SPARSE_IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] arm: omap: gpio: don't access irq_desc array directly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] IRQ-related changes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 09/10] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH v7 4/7] omap3: nand: prefetch in irq mode support
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: I2C Touchscreen OMAP OOPS
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1 09/10] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• I2C Touchscreen OMAP OOPS
  • From: "David Lynch Jr." <dhlii@xxxxxxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT/PATCH 01/10] cbus: retu: give it a context structure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: Tejun Heo <tj@xxxxxxxxxx>
• RE: [PATCH] OMAP2+: hwmod: incorrect computation of autoidle_mask
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH v3 07/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFT/PATCH 01/10] cbus: retu: give it a context structure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] TI816X: Update common OMAP machine specific sources
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] OMAP3+: sr_device: include pm header
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ETM: Fix etm_probe and etb_probe section mismatch warnings in arch/arm/kernel/etm.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] OMAP2+: TWL: make conversion routines static
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] OMAP2+: TWL: include pm header for init protos
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] OMAP: TWL: sparse fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 4/4] TI816X: Add low level debug support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v3 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v3 2/4] TI816X: Update common OMAP machine specific sources
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v3 0/4] Introduce support for TI816X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP PM: Expose vc registers in debugfs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] OMAP2+: hwmod: incorrect computation of autoidle_mask
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: Cannot get USB ports on custom beagleboard to work
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] ETM: Fix etm_probe and etb_probe section mismatch warnings in arch/arm/kernel/etm.c
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 2/7 v2] OMAP2430: hwmod data: Add McSPI
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCH v3 14/17] OMAP2,3: DSS2: VENC Move init,exit to driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 10/17] OMAP2,3: DSS2: Move dss_feature_init to dss
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 08/17] OMAP2,3: DSS2: Create platform_driver for each DSS HW IP
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 15/17] OMAP2,3: DSS2: DSI Move init, exit to driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 12/17] OMAP2,3: DSS2: RFBI Move init,exit to driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 00/17] OMAP2,3: hwmod DSS Adaptation
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 13/17] OMAP2,3: DSS2: DISPC Move init,exit to driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 09/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 11/17] OMAP2,3: DSS2: DSS Move init,exit to driver
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 06/17] OMAP2,3 DSS2 Move DSS driver register from board file to devices.c
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 04/17] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 07/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• [PATCH v3 05/17] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Guruswamy Senthilvadivu <svadivu@xxxxxx>
• RE: [PATCH v7 5/7] omap3: nand: configurable fifo threshold to gain the throughput
  • From: "Nori, Sekhar" <nsekhar@xxxxxx>
• RE: [PATCH v7 4/7] omap3: nand: prefetch in irq mode support
  • From: "Nori, Sekhar" <nsekhar@xxxxxx>
• [PATCH] OMAP2+: hwmod: incorrect computation of autoidle_mask
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [RFT/PATCH 10/10] cbus: Makefile: re-enable retu-wdt
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 09/10] cbus: retu-rtc: drop the reset_occurred flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 08/10] cbus: retu-rtc: move to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 07/10] cbus: retu-pwrbutton: convert to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 06/10] cbus: retu: headset: convert to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 03/10] cbus: retu: move module_* close to the matching symbol
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 04/10] cbus: retu: cleanup error path
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 02/10] cbus: retu: get rid of retu-user.c
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 01/10] cbus: retu: give it a context structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH 00/10] move retu to threaded IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v7 12/12] OMAP2: dmtimer: set wakeup enable explicitly in plat
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: Cannot get USB ports on custom beagleboard to work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/7 v2] OMAP2430: hwmod data: Add McSPI
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/6] Add infrastructure for conditional code and data sections
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Cannot get USB ports on custom beagleboard to work
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [QUESTION] what's the problem with CBUS ?
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Thara Gopinath <thara@xxxxxx>
• RE: [PATCH v6 07/10] OMAP3: PM: Adding T2 enabling of smartreflex support
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [QUESTION] what's the problem with CBUS ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/7 v2] OMAP: runtime: McSPI driver runtime conversion
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 6/7 v2] OMAP: devices: Modify McSPI device to adapt to hwmod framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 4/7 v2] OMAP4: hwmod data: Add McSPI
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/7 v2] OMAP2430: hwmod data: Add McSPI
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari@xxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Anca Emanuel <anca.emanuel@xxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP PM: Expose vc registers in debugfs
  • From: sawant@xxxxxx
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• RE: [PATCH 03/12] OMAP4: clock data: Add missing DPLL x2 clock nodes
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: OMAP Color Rotation
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH v7 1/1] spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transition
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• RE: OMAP NAND redux
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• [PATCH v7 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 2/7] omap3: nand: configurable transfer type per board
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 6/7] omap3: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 4/7] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 7/7] omap3: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 5/7] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 1/7] omap3630: nand: fix device size to work in polled mode
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v7 0/7] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH] OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  • From: Mika Westerberg <ext-mika.1.westerberg@xxxxxxxxx>
• Re: [PATCH v6 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/1] spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transition
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] omap-sham: backlog handling fix
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 0/1] crypto: omap-sham backlog handling fix
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• [PATCH 1/1] omap-sham: backlog handling fix
  • From: Dmitry Kasatkin <dmitry.kasatkin@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v6 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v6 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 0/7 v2] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 3/5] ASoC: DMIC: Adding OMAP DMIC driver to build
  • From: "Lambert, David" <dlambert@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: "Lambert, David" <dlambert@xxxxxx>
• Re: [RFC/PATCH 0/3] TWL4030 IRQ Changes
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• OMAP Color Rotation
  • From: "David Lynch Jr." <dhlii@xxxxxxxxxx>
• Re: [RFC/PATCH 0/3] TWL4030 IRQ Changes
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] TWL4030 IRQ Changes
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v5 2/5] OMAP4: Adding voltage driver support
  • From: Anand Sawant <sawant@xxxxxx>
• [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 1/3] mfd: twl4030-irq: move to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 0/3] TWL4030 IRQ Changes
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 2/3] mfd: twl4030-irq: drop the workqueue hackery
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v6 09/10] OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
  • From: Anand Sawant <sawant@xxxxxx>
• RE: [PATCH v6 01/10] OMAP3: PM: Adding voltage driver support.
  • From: Anand Sawant <sawant@xxxxxx>
• Re: [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/5] ASoC: DMIC codec: Adding a generic DMIC codec
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 2/2] mfd: twl4030-irq: move to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 0/2] Move twl*-irq.c to threaded_irq infrastructure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 3/5] ASoC: DMIC: Adding OMAP DMIC driver to build
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] MAP4: DMIC: Add DMIC codec platform devices
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 1/5] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH 5/5] MAP4: DMIC: Add DMIC codec platform devices
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH 4/5] OMAP4: hwmod: add entries for DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH 0/5] Adding OMAP DMIC driver to kernel
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH 3/5] ASoC: DMIC: Adding OMAP DMIC driver to build
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH 2/5] ASoC: DMIC codec: Adding a generic DMIC codec
  • From: David Lambert <dlambert@xxxxxx>
• Re: [PATCH] TWD: enable one-shot mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [QUESTION] what's the problem with CBUS ?
  • From: Felipe Balbi <balbi@xxxxxx>
• [QUESTION] what's the problem with CBUS ?
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: omapfb: no driver for display error with linux-2.6.37-rc7
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [OMAP4] Cpufreq_utils on Android
  • From: sumeet linux <sumeet4linux@xxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: protect dmm_map properly
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [GIT PULL] OMAP USB Changes for Merge Window
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: omapfb: no driver for display error with linux-2.6.37-rc7
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH v8 1/3] OMAP4: hwmod data: Add keypad in the hwmod database
  • From: shubhrajyoti@xxxxxx
• [PATCH v8 3/3] OMAP4:keypad: PM runtime
  • From: shubhrajyoti@xxxxxx
• [PATCH v8 2/3] OMAP4: keypad: Add the board support.
  • From: shubhrajyoti@xxxxxx
• [PATCH 0/3]OMAP4: Keypad support
  • From: shubhrajyoti@xxxxxx
• RE: Issue : jffs2 and ecc layout
  • From: Liu Hui-R64343 <r64343@xxxxxxxxxxxxx>
• Re: omapfb: no driver for display error with linux-2.6.37-rc7
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• linux-next: manual merge of the omap tree with the arm tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• omapfb: no driver for display error with linux-2.6.37-rc7
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH] ETM: Fix etm_probe and etb_probe section mismatch warnings in arch/arm/kernel/etm.c
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH] TWD: enable one-shot mode
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v6 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] staging: tidspbridge: rmgr code cleanup
  • From: Ionut Nicu <ionut.nicu@xxxxxxxxxx>
• Re: [PATCH v5 1/1] OMAP2: Spi: Force CS to be in inactive state after off-mode transition
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: tidspbridge: remove code referred by OPT_ZERO_COPY_LOADER
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 1/5] staging:tidspbridge - Remove unused defined constants
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Issue : jffs2 and ecc layout
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• Re: [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• [PATCH] omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>