Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: "Jan, Sebastien" <s-jan@xxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Creating a uboot script that will write MLO only once to NAND
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: State of LDP3430 platform
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: Creating a uboot script that will write MLO only once to NAND
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: State of LDP3430 platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Creating a uboot script that will write MLO only once to NAND
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCHv2 1/2] OMAP3: Devkit8000: Change lcd power pin
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3 4/6] OMAP4: hwmod data: Add McSPI
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCHv2 1/2] OMAP3: Devkit8000: Change lcd power pin
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v3 6/6] OMAP: runtime: McSPI driver runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 4/6] OMAP4: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 3/6] OMAP3: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 2/6] OMAP2430: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 1/6] OMAP2420: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v3 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCHv2 2/2] omap3: devkit8000: fix tps65930 pullup/pulldown configuration
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv2 1/2] OMAP3: Devkit8000: Change lcd power pin
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv2 0/2] misc Devkit8000 fixes
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: mach-omap2: potential NULL dereference
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: potential NULL dereference
  • From: walter harms <wharms@xxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Jamie Iles <jamie@xxxxxxxxxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [PATCH] arm: mach-omap2: potential NULL dereference
  • From: Vasiliy Kulikov <segoon@xxxxxxxxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] arm: mach-omap2: potential NULL dereference
  • From: Vasiliy Kulikov <segoon@xxxxxxxxxxxx>
• RE: State of SDP4430 platform
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Jamie Iles <jamie@xxxxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] arm: omap2: clksel: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 7/7] arm: omap2: clksel: fix compile warning
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH 7/7] arm: omap2: clksel: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/7] arm: omap2: irq: fix compile warning:
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/7] arm: omap2: mux: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/7] arm: omap1: fix a bunch of section mismatches
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/7] arm: omap1: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/7] arm: omap1: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/7] arm: omap: i2c: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/7] OMAP compile warning fix
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] arm: omap: remove duplicated headers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v7 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 15/18] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 14/18] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 13/18] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 05/18] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v7 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: State of LDP3430 platform
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• [RFC+CFT] Use word operations in bitops
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] arm: omap: remove duplicated headers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [OFF TOPIC] Off on business travel for next two weeks
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: State of SDP4430 platform
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: State of SDP4430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• State of SDP4430 platform
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: State of LDP3430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: State of LDP3430 platform
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: State of LDP3430 platform
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: State of LDP3430 platform
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: State of LDP3430 platform
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] Remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: David Anders <x0132446@xxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap-fixes and minor board updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• RE: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v6 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 15/18] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 14/18] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 13/18] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 05/18] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v6 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH] TWD: enable one-shot mode
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• RE: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: "Jan, Sebastien" <s-jan@xxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: [OFF TOPIC] Off on business travel for next two weeks
  • From: Mian Yousaf Kaukab <yrehan@xxxxxxxxx>
• Re: [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: "Jan, Sebastien" <s-jan@xxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v3 1/1] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] omap3: devkit8000: fix tps65930 pullup/pulldown configuration
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [OFF TOPIC] Off on business travel for next two weeks
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] omap3: devkit8000: misc fixes
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• RE: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/3] omap3: devkit8000: misc fixes
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: TAO HU <tghk48@xxxxxxxxxxxx>
• RE: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv2] staging: tidspbridge: configure full L1 MMU range
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH 2/3] omap3: devkit8000: fix tps65930 pullup/pulldown configuration
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [PATCH 3/3] omap3: devkit8000: Use generic gpio for second lcd enable
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [PATCH 1/3] omap3: devkit8000: Fix indentation issue
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• [PATCH 0/3] omap3: devkit8000: misc fixes
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH v4 0/4] Introduce support for TI816X processor series
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• [PATCH] adding gpmc configuration functions, west bridge related
  • From: Sutharsan Ramamoorthy <sutharsan.ramamoorthy@xxxxxxxxx>
• [PATCH v3 1/1] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v3 0/1] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: OMAP4 ES2.0 Unhandled fault: imprecise external abort
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• [PATCH 1/1 v2] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v2 0/1] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] arm: omap3: cm-t3517: minor comment fix
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 1/2] arm: omap3: cm-t3517: rtc fix
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 0/2] cm-t3517 fixes
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Valdis.Kletnieks@xxxxxx
• Re: Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 4/4] arm: omap: clockdomain: fix compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 3/4] arm: omap: prm: fix compile error
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/4] arm: omap: clockdomain: fix compile error
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH 4/4] arm: omap: clockdomain: fix compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/4] arm: omap: prm: fix compile error
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] arm: omap: io: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] arm: omap: clock: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] Compile Errors and Warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: Spinlock recursion after root nfs mount
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• RE: [PATCH RFC:] FIX: OMAP3EVM: Ethernet controller smsc911x reset
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 12/12] cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  • From: Len Brown <lenb@xxxxxxxxxx>
• Re: [PATCHv2] omap3: Add basic support for 720MHz part
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: Passing mem=1G to kernel on Panda, system is unstable.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 3/9] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  • From: Len Brown <lenb@xxxxxxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Len Brown <lenb@xxxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] adding gpmc configuration functions, west bridge related
  • From: Greg KH <greg@xxxxxxxxx>
• Re: 2.6.37-omap1 tag?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: 2.6.37-omap1 tag?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: 2.6.37-omap1 tag?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCHv2] omap3: Add basic support for 720MHz part
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: 2.6.37-omap1 tag?
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 0/0] RFC: ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Q: OMAP 4430 FDIF (Face Detection Interface)
  • From: Thomas Winkler <tom.winkler@xxxxxxxxx>
• Re: [PATCH 0/0] RFC: ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/0] RFC: ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH 3/9] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Thomas Renninger <trenn@xxxxxxx>
• RE: OMAP DSS Enable clocks in dss_setup_partial_planes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [RFC 1/3] OMAP4: clockdomain: Add clkmd static dependency srcs
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 2/3] OMAP4: CM: Add CM accesor api for bitwise control
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 0/3] OMAP4 static dependency support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: OMAP DSS Enable clocks in dss_setup_partial_planes
  • From: Ben Tucker <btucker@xxxxxxxxxxx>
• Re: [PATCH 0/0] RFC: ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP DSS Enable clocks in dss_setup_partial_planes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] OMAP: Enable Sysrq on serial console
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Len Brown <lenb@xxxxxxxxxx>
• Re: [PATCH 3/9] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  • From: Len Brown <lenb@xxxxxxxxxx>
• RE: Issues with ADATA SD cards on OMAP?
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: Issues with ADATA SD cards on OMAP? -- dto calculation??
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Issues with ADATA SD cards on OMAP? -- dto calculation??
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH v6.1 3/3] omap3: beaglexm: fix power on of DVI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 2/4] ASoC: DMIC codec: Adding a generic DMIC codec
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• [PATCH v6.1 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 3/3] omap3: beaglexm: fix power on of DVI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH 0/0] RFC: ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v5 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omap3: igep3: Add omap_reserve functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] omap3: beaglexm: fix power on of DVI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Spinlock recursion after root nfs mount
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• OMAP DSS Enable clocks in dss_setup_partial_planes
  • From: Ben Tucker <btucker@xxxxxxxxxxx>
• [PATCH v5 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v5 2/3] omap3: beaglexm: fix DVI reset GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• Passing mem=1G to kernel on Panda, system is unstable.
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: 2.6.37-omap1 tag?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb (omap3) as host fails with reconnecting devices
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• [PATCH] omap3: igep3: Add omap_reserve functionality
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 7/7 v2] OMAP: runtime: McSPI driver runtime conversion
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] TWD: enable one-shot mode
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: 2.6.37-omap1 tag?
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• 2.6.37-omap1 tag?
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 04/17] OMAP2,3 DSS2 Change driver name to omap_display
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH] TWD: enable one-shot mode
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [GIT PULL] OMAP DSS changes for .38 merge window v2
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 04/17] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/3] IGEP board changes for .38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 26/30] mmc: update workqueue usages
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: More LDP stuff
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/4] TI816X: Add low level debug support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v4 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v4 2/4] TI816X: Update common OMAP machine specific sources
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v4 0/4] Introduce support for TI816X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] arm: omap4: pandaboard: turn on PHY reference clock at init
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH v4 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/3] omap3: igep3: Fix IGEP module second MMC channel power supply.
  • From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/3] perf: add OMAP support for the new power events
  • From: Thomas Renninger <trenn@xxxxxxx>
• Unbalanced IRQ 257 wake disable
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: UNS: Re: [PATCH] musb: move usb_add_hcd to the core init code from gadget code (v2)
  • From: Brad Parker <brad@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• RE: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 3/3] omap3: igep2: Add keypad support.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/3] omap3: igep3: Fix IGEP module second MMC channel power supply.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 1/3] omap3: igep3: Add USB EHCI support for IGEP module.
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 0/3] IGEP board changes for .38 merge window
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH v4 3/3] omap3: beaglexm: fix power on of DVI
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v4 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH] musb: move usb_add_hcd to the core init code from gadget code (v2)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] musb: move usb_add_hcd to the core init code from gadget code (v2)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] musb: move usb_add_hcd to the core init code from gadget code (v2)
  • From: Brad Parker <brad@xxxxxxxxxxx>
• RE: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH v8 0/11] dmtimer adaptation to platform_driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 2/2] tools, perf: Documentation for the power events API
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [GIT PULL] OMAP DSS changes for .38 merge window v2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: cpuidle omap 4430, some clarifications please?
  • From: Etienne Le Sueur <elesueur@xxxxxxxxxxxxxxx>
• RE: cpuidle omap 4430, some clarifications please?
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• cpuidle omap 4430, some clarifications please?
  • From: Etienne Le Sueur <elesueur@xxxxxxxxxxxxxxx>
• [PATCH v3] LEDS: Add output invertion option to backlight trigger
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: Issues with ADATA SD cards on OMAP?
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Issues with ADATA SD cards on OMAP?
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 26/30] mmc: update workqueue usages
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [RFC PATCH] Avoid aliasing mappings in DMA coherent allocator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• TWL-rtc on 4430sdp doesn't work?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/40] Complete set of clocksource/sched_clock patches
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] misc. fixes for 2.6.38-rc
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v4 1/3] omap3: beaglexm: fix EHCI power up GPIO dir
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 3/3] omap3: beaglexm: fix power on of DVI
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 2/3] omap3: beaglexm: fix DVI reset GPIO
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v4 0/3] OMAP3: beaglexm: GPIO fixes
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 7/7 v2] OMAP: runtime: McSPI driver runtime conversion
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: Latest regressions
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: Nishanth Menon <nm@xxxxxx>
• RE: 4430SDP boot failure - solved + SPI bug fix
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Latest config warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: 4430SDP boot failure - solved + SPI bug fix
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: 4430SDP boot failure - solved + SPI bug fix
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: Latest config warning
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [RFC] omap3: Enable SmartReflex calculations for 720MHz
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: RFBI worked example
  • From: Ben Tucker <btucker@xxxxxxxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Daniel Díaz <mrchapp@xxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Latest config warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: "Lambert, David" <dlambert@xxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: 4430SDP boot failure - solved + SPI bug fix
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• RE: linux-next: manual merge of the usb tree with the omap tree
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: RFBI worked example
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Latest regressions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: linux-next: manual merge of the usb tree with the omap tree
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: RFBI worked example
  • From: Ben Tucker <btucker@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [GIT PULL] OMAP DSS changes for .38 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP DSS changes for .38 merge window
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: 4430SDP boot failure
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] OMAP DSS changes for .38 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [GIT PULL] OMAP DSS changes for .38 merge window
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH v5 00/17] OMAP2,3: hwmod DSS Adaptation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Build breakage with omap2plus_defconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] omap3: Add basic support for 720MHz part
  • From: Sanjeev Premi <premi@xxxxxx>
• RE: Build breakage with omap2plus_defconfig
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: omap: Beagle: detect new xM revision B
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Build breakage with omap2plus_defconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Latest regressions
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Build breakage with omap2plus_defconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 00/17] OMAP2,3: hwmod DSS Adaptation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Build breakage with omap2plus_defconfig
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: Build breakage with omap2plus_defconfig
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Build breakage with omap2plus_defconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] OMAP DSS changes for .38 merge window
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Build breakage with omap2plus_defconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Latest config warning
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v5 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 13/17] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 15/17] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 14/17] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 12/17] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 11/17] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 07/17] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 05/17] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 04/17] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v5 00/17] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• RE: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 8/9] perf timechart: Map power:cpu_idle events to the corresponding cpuidle state
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/9] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  • From: Thomas Renninger <trenn@xxxxxxx>
• [PATCH 8/9] perf timechart: Map power:cpu_idle events to the corresponding cpuidle state
  • From: Thomas Renninger <trenn@xxxxxxx>
• [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH v3 09/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• omap: Beagle: detect new xM revision B
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• [RFT/PATCH v2 12/12] cbus: Makefile: re-enable retu-wdt
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 11/12] cbus: retu-rtc: drop the reset_occurred flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 09/12] cbus: retu-pwrbutton: convert to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 07/12] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 10/12] cbus: retu-rtc: move to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 06/12] arm: omap: cbus: pass irq_base and irq_end via platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 08/12] cbus: retu: headset: convert to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 05/12] arm: omap: irqs: add CBUS_RETU_IRQ_BASE and CBUS_RETU_IRQ_END
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 04/12] cbus: retu: cleanup error path
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 03/12] cbus: retu: move module_* close to the matching symbol
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 02/12] cbus: retu: give it a context structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 01/12] cbus: retu: get rid of retu-user.c
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/PATCH v2 00/12] Retu meets GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 2/5] omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• RE: 4430SDP boot failure
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] tools, perf: Documentation for the power events API
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 15/17] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 14/17] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 13/17] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 12/17] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 11/17] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 07/17] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 05/17] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 04/17] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 00/17] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [RFT/PATCH 05/10] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] TI816X: Update common omap platform files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap changes for v2.6.38
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: Cpufreq: Clean up to support multi omap builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 4430SDP boot failure
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] omap2+: pm_bus: make functions used as pointers as static
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] OMAP4: hwmod: add entries for DMIC driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: pm: cleanup !CONFIG_SUSPEND handling
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 4/4] OMAP4: DMIC: Add DMIC codec platform devices
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>