Linux for Texus Instruments OMAP Processors

• Thread Index

• RE: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH] omap2+: Fix omap_serial_early_init to work with init_early hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap2+: Make omap_hwmod_late_init into core_initcall
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH] OMAP: PM: DMA: Enable runtime pm
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v5 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v1 1/3]mmc: implemented runtime pm for mmc host
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: [RFC 2/3] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU on 3430ES2PLUS
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv3] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: PM: DMA: Enable runtime pm
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/4] arch/arm/mach-omap2/smartreflex.c: Add missing IS_ERR test
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP3EVM: Set TSC wakeup option in pad config
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 4/4] arch/arm/mach-omap2/smartreflex.c: Add missing IS_ERR test
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2] OMAP3EVM: Made backlight GPIO default state to off
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] omap fixes for v2.6.38-rc2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: OMAP3 - PM - Question - Disabling CLKEN and HFCLKOUT signals from TWL4030 scripts
  • From: "Nagendra" <nagendra@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [RFC] serial: omap-serial: Enable the UART wake-up bits always
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• RE: [PATCH] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] AM/DM37x: DSS mux configuration for >Rev-B processor cards
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] perf: add OMAP support for the new power events
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP:board-omap3evm: Change TWL related gpio API's to gpio*_cansleep
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCH] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] OMAP3EVM: Made backlight GPIO default state to off
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: hvaibhav@xxxxxx
• [PATCH] OMAP3EVM: Made backlight GPIO default state to off
  • From: hvaibhav@xxxxxx
• [PATCH] AM/DM37x: DSS mux configuration for >Rev-B processor cards
  • From: hvaibhav@xxxxxx
• [PATCH] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: hvaibhav@xxxxxx
• [PATCH] OMAP:board-omap3evm: Change TWL related gpio API's to gpio*_cansleep
  • From: hvaibhav@xxxxxx
• Re: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• [PATCH] perf: add OMAP support for the new power events
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: smp: Skip secondary cpu calibration to speed-up boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• RE: [PATCH 5/5] ARM: smp: Skip secondary cpu calibration to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 5/5] ARM: smp: Skip secondary cpu calibration to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/5] ARM: gic: Add distributor and interface enable/disable accessory api
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/5] ARM: Few patches for PM enablement.
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 5/5] ARM: smp: Skip secondary cpu calibration to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 15/18] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 14/18] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 13/18] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 05/18] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v9 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• RE: OMAP3 - PM - Question - Disabling CLKEN and HFCLKOUT signals from TWL4030 scripts
  • From: "Lesly A M" <leslyam@xxxxxx>
• Re: Enabling TPS65950 / TWL4030 Real-time clock functions
  • From: zzz <cooper.zp@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2: use early init hook
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v9 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v9 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCKtospeed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK tospeed-up boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: 2.6.38-rc1-git1 musb undefined references
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: 2.6.38-rc1-git1 musb undefined references
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v9 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 15/18] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 14/18] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 13/18] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 05/18] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v9 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• RE: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK tospeed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v8 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [PATCH v4 4/4] TI816X: Add low level debug support
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• RE: [PATCH v4 2/4] TI816X: Update common OMAP machine specific sources
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• RE: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv2] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 4/4] TI816X: Add low level debug support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 2/4] TI816X: Update common OMAP machine specific sources
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv4] omap3: Add basic support for 720MHz part
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] Westbridge software module, fixes errors reported by checkpatch.pl
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: OMAP3 - PM - Question - Disabling CLKEN and HFCLKOUT signals from TWL4030 scripts
  • From: "Nagendra" <nagendra@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [Query] mm: !*pte hit in mm/memory.c:remap_pte_range
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCH v8 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v4 0/4] Introduce support for TI816X processor series
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Luke Gong <lukejgong@xxxxxxxxx>
• Re: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Luke Gong <lukejgong@xxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH v8 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 15/18] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 14/18] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 13/18] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init()
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 06/18] OMAP2,3 DSS2 Use Regulator init with driver name
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 05/18] OMAP2,3 DSS2 Change driver name to omap_display
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 03/18] OMAP2430: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v8 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Luciano Coelho <coelho@xxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [QUERY] [AUDIO][OMAP3 EVM] arecord not working on OMAP3 EVM
  • From: "Koyamangalath, Abhilash" <abhilash.kv@xxxxxx>
• [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 07/13] OMAP3: Introduce custom set rate and get rate APIs for scalable devices
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 09/13] OMAP3: Introduce voltage domain info in the hwmod structures.
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 04/13] OMAP: Introduce dependent voltage domain support
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 13/13] OMAP: Add DVFS Documentation
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 12/13] OMAP2PLUS: Enable various options in defconfig
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 10/13] OMAP3: Add voltage dependency table for VDD1.
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 11/13] OMAP2PLUS: Replace voltage values with Macros
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 05/13] OMAP: Introduce device scale implementation
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 03/13] OMAP: Implement Basic DVFS
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 06/13] OMAP: Disable Smartreflex across DVFS
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 02/13] OMAP: Introduce device specific set rate and get rate in omap_device structure
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 01/13] OMAP: Introduce accessory APIs for DVFS
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• RE: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v5 4/6] OMAP4: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 6/6] OMAP: runtime: McSPI driver runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 3/6] OMAP3: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 2/6] OMAP2430: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 1/6] OMAP2420: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v5 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH v7 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [Query] OMAP: DSS2: Margin for downscaling in clock calculations
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [Query] mm: !*pte hit in mm/memory.c:remap_pte_range
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP3 - PM - Question - Disabling CLKEN and HFCLKOUT signals from TWL4030 scripts
  • From: "Lesly A M" <leslyam@xxxxxx>
• Re: [PATCHv3] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCHv2] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCHv3] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv2] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• OMAP3 - PM - Question - Disabling CLKEN and HFCLKOUT signals from TWL4030 scripts
  • From: "Nagendra" <nagendra@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• RE: [PATCH] omap3: nand: bch ecc support added
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH] omap3: nand: bch ecc support added
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• RE: [PATCH] omap3: nand: bch ecc support added
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [QUERY] [AUDIO][OMAP3 EVM] arecord not working on OMAP3 EVM
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] omap3: nand: bch ecc support added
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: Merging xloader, bootloader and boot environment variables partitions into a single partition on NAND
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: 2.6.38-rc1-git1 musb undefined references
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v7 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH] omap3: nand: bch ecc support added
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: 2.6.38-rc1-git1 musb undefined references
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] omap2: fix DPLL_FREQSEL calculation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Luke Gong <lukejgong@xxxxxxxxx>
• Re: Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Fail to suspend to ram: "Class driver suspend failed for cpu0"
  • From: Luke Gong <lukejgong@xxxxxxxxx>
• [Query] mm: !*pte hit in mm/memory.c:remap_pte_range
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• [PATCH v2 3/3] ARM: oprofile: Always allow backtraces
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• [PATCH v2 2/3] oprofile: Provide stubs for oprofile_perf_{init,exit}
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• [PATCH v2 1/3] oprofile: Use CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• [PATCH v2 0/3] oprofile: ARM backtraces and few minors
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• Re: NAND flash update via serial debug console
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] omap4: hsmmc: Adding ADMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] omap4: Add board_data and initialise the serial pads
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• NAND flash update via serial debug console
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Merging xloader, bootloader and boot environment variables partitions into a single partition on NAND
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Rob Herring <robherring2@xxxxxxxxx>
• 2.6.38-rc1-git1 musb undefined references
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCHv5] OMAP3: Devkit8000: Change lcd power pin
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• RE: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [QUERY] [AUDIO][OMAP3 EVM] arecord not working on OMAP3 EVM
  • From: "Koyamangalath, Abhilash" <abhilash.kv@xxxxxx>
• Re: [PATCH] omap3: nand: bch ecc support added
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• [PATCH v2] omap2: fix DPLL_FREQSEL calculation
  • From: John Ogness <john.ogness@xxxxxxxxxxxxx>
• [PATCH] OMAP: omap-mcbsp: Fix building after replacement
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• Re: [PATCH] ARM: oprofile: Always allow backtraces
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCHv4] omap3: Add basic support for 720MHz part
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] omap2: fix DPLL_FREQSEL calculation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] OMAP: DMA: clear interrupt status correctly
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH] ARM: oprofile: Always allow backtraces
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] ARM: oprofile: Always allow backtraces
  • From: Robert Richter <robert.richter@xxxxxxx>
• Re: [PATCH] ARM: oprofile: Always allow backtraces
  • From: Robert Richter <robert.richter@xxxxxxx>
• [PATCH] omap3: nand: bch ecc support added
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• RE: OMAP DSS Enable clocks in dss_setup_partial_planes
  • From: "Taneja, Archit" <archit@xxxxxx>
• Re: [PATCH] ARM: oprofile: Always allow backtraces
  • From: Robert Richter <robert.richter@xxxxxxx>
• [PATCH] ARM: smp: Introduce ARCH_HAS_COMMON_CORES_CLOCK to speed-up boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCHv4 3/4] OMAP3: Devkit8000: Check return value of gpio_request
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: [PATCHv4 2/4] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• [RESEND PATCH 3/3] arm: Kconfig: allow OMAP to use sparse IRQ numbering
  • From: Felipe Balbi <balbi@xxxxxx>
• [RESEND PATCH 2/3] arm: Kconfig: remove duplicated SPARSE_IRQ entry
  • From: Felipe Balbi <balbi@xxxxxx>
• [RESEND PATCH 1/3] arm: Kconfig: remove duplicated GENERIC_HARDIRQS entry
  • From: Felipe Balbi <balbi@xxxxxx>
• [RESEND PATCH 0/3] ARM IRQ patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH] arm: fix oops in sched_clock_poll
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] OMAP: DMA: clear interrupt status correctly
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH] Westbridge software module, fixes errors reported by checkpatch.pl
  • From: Sutharsan Ramamoorthy <sutharsan.ramamoorthy@xxxxxxxxx>
• Re: [PATCH 6/7] arm: plat-omap: system.h: move voiceblue definitions into the board header
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/7] OMAP compile warning fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• beagle board cannot suspend to RAM
  • From: Luke Gong <lukejgong@xxxxxxxxx>
• Re: State of SDP4430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: State of SDP4430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/7] arm: omap2: clksel: fix compile warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: DMA: clear interrupt status correctly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: DMA: clear interrupt status correctly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 2/4] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] cm-t3517 fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: Thumb-2: Symbol manipulation macros for function body copying
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] ARM: oprofile: Always allow backtraces
  • From: Ari Kauppi <kauppi@xxxxxxxxxxxx>
• Re: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 09/14] OMAP: DMA: Convert DMA library into platform driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Adio on BeagleBoard XM 2.6.37-rc8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap1: Fix sched_clock for the MPU timer (Re: State of LDP3430 platform)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used (Re: State of LDP3430 platform)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: State of SDP4430 platform
  • From: "Krishnamoorthy, Balaji T" <balajitk@xxxxxx>
• Re: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] OMAP2,3: DSS2: Report -EBUSY when to many registered isr
  • From: btucker@xxxxxxxxxxx
• [PATCH] OMAP: powerdomain: remove unused func declaration
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 3/3] OMAP4: clocks: Remove unused clksel definitions
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 2/3] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU on 3430ES2PLUS
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RFC 0/3] Use clknames to reference parent/bypass/ref clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCH RESEND v8 7/7] omap3: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 6/7] omap3: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 4/7] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 5/7] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 1/7] omap3630: nand: fix device size to work in polled mode
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 2/7] omap3: nand: configurable transfer type per board
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH RESEND v8 0/7] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: Adio on BeagleBoard XM 2.6.37-rc8
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH v2] arm: mach-omap2: potential NULL dereference
  • From: Vasiliy Kulikov <segoon@xxxxxxxxxxxx>
• Re: [PATCHv4 3/4] OMAP3: Devkit8000: Check return value of gpio_request
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [PATCHv4 3/4] OMAP3: Devkit8000: Check return value of gpio_request
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Adio on BeagleBoard XM 2.6.37-rc8
  • From: Ashok Babu <ashok3d@xxxxxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Abdoulaye Walsimou GAYE <awg@xxxxxxxxxxxxxx>
• RE: [PATCH 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Felipe Balbi <balbi@xxxxxx>
• [HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• RE: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH] OMAP: DMA: clear interrupt status correctly
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHv4 4/4] OMAP3: Devkit8000: Fix indentation of brace
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] OMAP3: PM: Adding T2 enabling of smartreflex
  • From: shweta gulati <shweta.gulati@xxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv4 3/4] OMAP3: Devkit8000: Check return value of gpio_request
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• [PATCHv2] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCHv4 2/4] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv4 1/4] OMAP3: Devkit8000: Change lcd power pin
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv4 4/4] OMAP3: Devkit8000: Fix indentation of brace
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv4 3/4] OMAP3: Devkit8000: Check return value of gpio_request
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv4 0/4] omap3: Devkit8000: misc fixes
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap1: Fix booting for 15xx and 730 with omap1_defconfig (Re: State of LDP3430 platform)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 4/6] OMAP4: hwmod data: Add McSPI
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] omap1: Fix booting for 15xx and 730 with omap1_defconfig (Re: State of LDP3430 platform)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH RFC] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] omap1: Fix sched_clock for the MPU timer (Re: State of LDP3430 platform)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: PM: Export omap_pm_set_min_bus_tput to modules
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] omap iommu: Gracefully fail iommu_enable if no arch_iommu is registered.
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: PM: Export omap_pm_set_min_bus_tput to modules
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [Query] OMAP: DSS2: Margin for downscaling in clock calculations
  • From: "Taneja, Archit" <archit@xxxxxx>
• Re: Fwd: [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] OMAP PRCM/clocksource/clockdomain fixes for 2.6.38-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: State of LDP3430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Fwd: [RFC 4/5] ARM: P2V: introduce phys_to_virt/virt_to_phys runtime patching
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: Add nand_base feature to align subpage read buffers
  • From: Charles Manning <manningc2@xxxxxxxxxxxxx>
• [PATCH 4/4] omap4: hsmmc: enable ADMA for MMC1 & MMC2
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 0/4] omap4: hsmmc: Adding ADMA support
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 3/4] omap4: hsmmc: Adding ADMA support for MMC1 & MMC2 controllers
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 2/4] omap: hsmmc: Rename and cleanup omap_hsmmc_dma_cleanup
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 1/4] omap: hsmmc: Rename use_dma to xfer_type and define possible transfers
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• RE: [PATCH] omap3: Add basic support for 720MHz part
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC+CFT] Use word operations in bitops
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RFC] omap4: Add board_data and initialise the serial pads
  • From: sricharan <r.sricharan@xxxxxx>
• Re: [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• Re: [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: "Kirill A. Shutemov" <kirill@xxxxxxxxxxxxx>
• [PATCH v2 3/5] OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 5/5] OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 4/5] OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 1/5] OMAP: clockdomain: Infrastructure to put arch specific code
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/5] Clockdomain split series
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [Query] OMAP: DSS2: Margin for downscaling in clock calculations
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• [PATCH v4 6/6] OMAP: runtime: McSPI driver runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 4/6] OMAP4: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 1/6] OMAP2420: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 2/6] OMAP2430: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 3/6] OMAP3: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v4 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH 04/14] ARM: v6k: introduce CPU_V6K option
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 04/14] ARM: v6k: introduce CPU_V6K option
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] arm: plat-omap: system.h: move voiceblue definitions into the board header
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap3: Add basic support for 720MHz part
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCHv3 1/2] OMAP3: Devkit8000: Change lcd power pin
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH] OMAP3: CPUIdle: prevent CORE from going off if doing so would reset an active clockdomain
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH 7/7] arm: mach-omap1: board-voiceblue: add missing include
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] mtd: Add nand_base feature to align subpage read buffers
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 7/7] arm: mach-omap1: board-voiceblue: add missing include
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/7] arm: plat-omap: dma: make omap_dma_in_1510_mode() static
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 5/7] arm: mach-omap1: board-h3: make nand_platdata static
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 6/7] arm: plat-omap: system.h: move voiceblue definitions into the board header
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 7/7] arm: mach-omap1: board-voiceblue: add missing include
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 4/7] arm: mach-omap1: board-htcherald: make htcpld_chips and htcpld_pfdata static
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 3/7] arm: mach-omap1: board-innovator: make innovator_mmc_init() static
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 0/7] omap1 sparse warning fixes
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 2/7] arm: mach-omap1: board-h2: make h2_nand_platdata static
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] omap3: Add basic support for 720MHz part
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCHv3 0/2] omap3: Devkit8000: misc fixes
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv3 2/2] OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• [PATCHv3 1/2] OMAP3: Devkit8000: Change lcd power pin
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• RE: State of SDP4430 platform
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3 4/6] OMAP4: hwmod data: Add McSPI
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: NULL deref on sched_clock_poll()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: NULL deref on sched_clock_poll()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• RE: [Query] OMAP: DSS2: Margin for downscaling in clock calculations
  • From: "Taneja, Archit" <archit@xxxxxx>
• NULL deref on sched_clock_poll()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/12] staging:tidspbridge - set1 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 00/12]staging:tidspbridge - Remove hungarian notation from structures
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 03/12] staging:tidspbridge - set3 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 05/12] staging:tidspbridge - set5 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 02/12] staging:tidspbridge - set2 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 04/12] staging:tidspbridge - set4 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 07/12] staging:tidspbridge - set7 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 11/12] staging:tidspbridge - set11 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 09/12] staging:tidspbridge - set9 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 06/12] staging:tidspbridge - set6 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 10/12] staging:tidspbridge - set10 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• [PATCH 12/12] staging:tidspbridge - set12 remove hungarian from structs
  • From: Armando Uribe <x0095078@xxxxxx>
• Re: State of LDP3430 platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH v4 1/4] TI816X: Update common omap platform files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 06/14] ARM: v6k: Dove platforms use V6K architecture CPUs
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 14/14] ARM: v6k: only allow SMP if we have v6k or v7 CPU
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 13/14] ARM: v6k: allow swp emulation again when ARMv7 is enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 12/14] ARM: v6k: do not disable CPU_32v6K based on platform selection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/14] ARM: v6k: select generic atomic64 code according to V6 variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: State of SDP4430 platform
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 08/14] ARM: v6k: select cmpxchg code sequences according to V6 variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 07/14] ARM: v6k: select clear exclusive code seqences according to V6 variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/14] ARM: v6k: introduce CPU_V6K option
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH 00/14] Fix issues with ARMv6+v6k+v7 kernels
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• RE: Open issues after 2.6.38 merge window
  • From: Paul Walmsley <paul@xxxxxxxxx>
• How to flash NAND over debug serial console
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [PATCH 04/14] ARM: v6k: introduce CPU_V6K option
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 07/14] ARM: v6k: select clear exclusive code seqences according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 13/14] ARM: v6k: allow swp emulation again when ARMv7 is enabled
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 10/14] ARM: v6k: select TLS register code according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 14/14] ARM: v6k: only allow SMP if we have v6k or v7 CPU
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 06/14] ARM: v6k: Dove platforms use V6K architecture CPUs
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 12/14] ARM: v6k: do not disable CPU_32v6K based on platform selection
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 09/14] ARM: v6k: select generic atomic64 code according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 08/14] ARM: v6k: select cmpxchg code sequences according to V6 variants
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 05/14] ARM: v6k: Realview EB 11MPCore and PB11MPCore use V6K architecture CPUs
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>