Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v3 1/2] ads7846: fix gpio free without requesting
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] ads7846: fix gpio free without requesting
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] Input: ads7846: use gpio_request_one to configure pendown_gpio
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH v3 1/2] ads7846: fix gpio free without requesting
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: serial8250: too much work for irq73
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxx>
• [PATCH 2/4] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 1/4] OMAP: DSS2: Adding dss_features for independent core clk divider
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 3/4] OMAP: DSS2: Adding macro for DISPC_DIVISOR register
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 4/4] OMAP4: DSS2: Using dss_features to set independent core clock divider
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 0/4] OMAP: DSS2: Fix for DISPC core functional clock divider
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 4/4] OMAP: DSS2: Get OMAP4 DPLL fclk for DPI interface
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 1/4] OMAP: DSS2: Add dss_feature for variable DPLL fclk
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 3/4] OMAP: DSS2: Using dss_features to clean cpu checks for clocks
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 2/4] OMAP: DSS: Renaming the dpll clk pointer in struct dss
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• [PATCH 0/4] OMAP4: DSS2: Adding fclk support for DPI interface
  • From: Raghuveer Murthy <raghuveer.murthy@xxxxxx>
• Re: [PATCH 4/7] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 4/7] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] omap3sdp: clean regulator supply mapping in board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH v2 2/2] omap3sdp: clean regulator supply mapping in board file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/2] Fix/Clean regulator consumer mapping for 3430sdp
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/2] omap3sdp: clean regulator supply mapping in board file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• [PATCH 2/2] omap3sdp: clean regulator supply mapping in board file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/2] omap3sdp: Fix regulator mapping for ads7846 TS controller
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/2] Fix/Clean regulator consumer mapping for 3430sdp
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCHv5] omap3: Add basic support for 720MHz part
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 10/13] cbus: retu-rtc: move to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 00/13] CBUS meets GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 13/13] cbus: tahvo: drop tahvo-user
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 12/13] cbus: Makefile: re-enable retu-wdt
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 11/13] cbus: retu-rtc: drop the reset_occurred flag
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 09/13] cbus: retu-pwrbutton: convert to threaded irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 08/13] cbus: retu: headset: convert to threaded_irq
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 07/13] cbus: retu: move to threaded IRQ and GENIRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 06/13] arm: omap: cbus: pass irq_base and irq_end via platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 05/13] arm: omap: irqs: add CBUS_RETU_IRQ_BASE and CBUS_RETU_IRQ_END
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 04/13] cbus: retu: cleanup error path
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 03/13] cbus: retu: move module_* close to the matching symbol
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 02/13] cbus: retu: give it a context structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFT/RFC/PATCH 01/13] cbus: retu: get rid of retu-user.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/7] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 5/7] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 7/7] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 6/7] usb: otg: TWL6030 Save the last event in otg_transceiver
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 3/7] usb: otg: OMAP4430: Introducing suspend function for power management
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 2/7] usb: otg: Remove one unnecessary I2C read request.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/7] usb: otg: enable regulator only on cable/device connect
  • From: Hema HK <hemahk@xxxxxx>
• [PATCHv2 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCHv2 1/2] ads7846: OMAP3: Removal of warnings backtrace in bootup
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 1/5 v5] OMAP2430: hwmod data: Add USBOTG
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] ads7846: fix gpio free without requesting
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: omap1/nokia770: mark some functions __init
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] ads7846: fix gpio free without requesting
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 2/2] Input: ads7846 - configure pendown gpio as input
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 0/4] omap4: hsmmc: Adding ADMA support
  • From: "Kadiyala, Kishore" <kishore.kadiyala@xxxxxx>
• RE: [PATCH 4/5 v5] OMAP2+: musb: HWMOD adaptation for musb.
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [PATCH 2/5 v5] OMAP3xxx: hwmod data: Add USBOTG
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [PATCH 3/5 v5] OMAP4430: hwmod data: Adding USBOTG
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [PATCH 1/5 v5] OMAP2430: hwmod data: Add USBOTG
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [PATCH 2/2] Input: ads7846 - configure pendown gpio as input
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 1/2] ads7846: fix gpio free without requesting
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/13] OMAP: Introduce accessory APIs for DVFS
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Determining reason for power-up : warm or cold boot
  • From: Jon Hunter <jon-hunter@xxxxxx>
• Determining reason for power-up : warm or cold boot
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register(v1)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm: Kconfig: allow OMAP to use sparse IRQ numbering
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] IOMMU error message cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v5 5/5] OMAP: mailbox: use runtime pm for clk and sysc handling
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v5 2/5] OMAP3: hwmod data: add mailbox data
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v5 1/5] OMAP2: hwmod data: add mailbox data
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v5 0/5] omap: mailbox: hwmod support
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v5 4/5] OMAP: mailbox: build device using omap_device/omap_hwmod
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: ARM Architecture and GENERIC_CMOS_UPDATE
  • From: Grant Erickson <marathon96@xxxxxxxxx>
• [PATCH 1/2] arm: Kconfig: select correct HAVE_SPARSE_IRQ symbol
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/2] ARM IRQ Kconfig Changes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] arm: Kconfig: allow OMAP to use sparse IRQ numbering
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] Input: ads7846 - configure pendown gpio as input
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 1/2] ads7846: fix gpio free without requesting
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH 3/5] OMAP3: hwmod data: Add HSMMC
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 2/5] OMAP2430: hwmod data: Add HSMMC
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 4/5] OMAP4: hwmod data: Add HSMMC
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 5/5] OMAP: devices: Modify HSMMC device to adapt to hwmod framework
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 1/5] OMAP2420: hwmod data: Add HSMMC
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• [PATCH 0/5] OMAP: HSMMC: hwmod adaptation
  • From: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
• Re: [PATCH v2] OMAP: fix fncpy API call
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] omap: use fncpy to copy the PM code functions to SRAM
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v5 1/4] drivers: hwspinlock: add framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v5 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v5 2/4] drivers: hwspinlock: add OMAP implementation
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v5 3/4] OMAP4: hwmod data: Add hwspinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v5 4/4] omap: add hwspinlock device
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v6 5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 2/6] OMAP2430: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 3/6] OMAP3: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 1/6] OMAP2420: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 6/6] OMAP: runtime: McSPI driver runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 4/6] OMAP4: hwmod data: Add McSPI
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH v6 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register(v1)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register(v1)
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Handling multiple watchdogs
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [Query]Using vcxio regulator on 4430sdp
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Archit Taneja <archit@xxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] Staging: Westbridge: added ioremap_nocache instead of phys_to_virt
  • From: Sutharsan <sutharsan.tech@xxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 13/13] OMAP: hwmod: Removal of macros for data that is obtained from hwmod database
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [Query]Using vcxio regulator on 4430sdp
  • From: archit taneja <archit@xxxxxx>
• [PATCH v2] OMAP: hwmod: Do not expect an entry in clkdev for opt_clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: Sricharan R <r.sricharan@xxxxxx>
• RE: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH] OMAP: hwmod: Do not expect an entry in clkdev to add alias for opt_clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: handling clock nodes with both parent and divider selection
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 3/5] omap3: board-3430sdp: Initialise the serial pads.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Setting MMC_CAP_POWER_OFF_CARD on mmc2 leads to filesystem problems on mmc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv5] OMAP3: Devkit8000: Change lcd power pin
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: fix fncpy API call
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] omap1: remove duplicated #include
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: mux: free allocated memory on error exit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 4/5] omap2: Fix camera resources for multiomap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v5 2/5] omap3: Remove unusued ISP CBUFF resource
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: ARM Architecture and GENERIC_CMOS_UPDATE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2+: remove unused UART base addresses from omap_globals
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv4] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v2] arm: mach-omap2: potential NULL dereference
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 2/2] OMAP3: beagle xm: enable upto 800MHz OPP
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] omap3|4: opp: make omapx_opp_init non-static
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv5] OMAP3: Devkit8000: Change lcd power pin
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Pandaboard boot problem
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2 13/13] OMAP: hwmod: Removal of macros for data that is obtained from hwmod database
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• RE: [PATCH] OMAP: hwmod: Do not expect an entry in clkdev to add alias for opt_clks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] OMAP: fix fncpy API call
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• RE: handling clock nodes with both parent and divider selection
  • From: Paul Walmsley <paul@xxxxxxxxx>
• serial8250: too much work for irq73
  • From: Robert Wörle <rwoerle@xxxxxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraints
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 09/13] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH] omap4: Fix ULPI PHY init for ES1.0 SDP (Re: 4430SDP boot failure)
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH 00/13] OMAP: Basic DVFS Framework
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v2 04/13] OMAP2430: hwmod data: Add McBSP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 02/13] OMAP: McBSP: Convert McBSP to platform device model
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 09/13] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: handling clock nodes with both parent and divider selection
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: fix fncpy API call
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP: Cleanup IOMMU error messages
  • From: David Cohen <david.cohen@xxxxxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCHv4] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• RE: [PATCH 4/6] omap4: dpll: Enable all DPLL autoidle at boot
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH] OMAP: hwmod: Do not expect an entry in clkdev to add alias for opt_clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [query] smartreflex: No PMIC hook to init smartreflex
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• Re: [PATCH 2/2] OMAP: Cleanup IOMMU error messages
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCHv3] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] omap4: dpll: Enable all DPLL autoidle at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: handling clock nodes with both parent and divider selection
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP: hwmod: Do not expect an entry in clkdev to add alias for opt_clks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] MAINTAINERS: add entry for OMAP powerdomain/clockdomain per-SoC layer support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Sutharsan <srmt@xxxxxxxxxxx>
• Re: Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Sutharsan <srmt@xxxxxxxxxxx>
• Re: [PATCH] Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv3] OMAP: Enable Magic SysRq on serial console ttyOx
  • From: Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx>
• OMAP PM fixes for 2.6.38-rc3
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [linux-pm] [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [GIT PULL] omap fixes for v2.6.38-rc2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: powerdomain: remove unused func declaration
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] OMAP: Add generic IOMMU errors code
  • From: David Cohen <david.cohen@xxxxxxxxx>
• [PATCH 2/2] OMAP: Cleanup IOMMU error messages
  • From: David Cohen <david.cohen@xxxxxxxxx>
• [PATCH 0/2] IOMMU error message cleanup
  • From: David Cohen <david.cohen@xxxxxxxxx>
• Re: [PATCH v2 12/13] ASoC: McBSP: get hw params from McBSP driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] OMAP4: DSS2: clocks: Add ick as dummy clock
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 3/4] OMAP2PLUS: DSS2: Generalize external clock names in struct dss of dss.c
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 2/4] OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 1/4] OMAP2PLUS: clocks: Align DSS clock names and roles
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 0/4] OMAP2PLUS: DSS: Generalize clock names
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH 19/23] arm: Fix possible null pointer read access
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [linux-pm] [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: Fix possible memory leak
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [query] smartreflex: No PMIC hook to init smartreflex
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [linux-pm] [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 10/13] OMAP3: Add voltage dependency table for VDD1.
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [linux-pm] [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [linux-pm] [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 13/13] OMAP: hwmod: Removal of macros for data that is obtained from hwmod database
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 12/13] ASoC: McBSP: get hw params from McBSP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 11/13] OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 10/13] OMAP: McBSP: Add pm runtime support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 09/13] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 06/13] OMAP4: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 07/13] OMAP3: hwmod: add dev_attr for McBSP sidetone
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 05/13] OMAP3: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 04/13] OMAP2430: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 02/13] OMAP: McBSP: Convert McBSP to platform device model
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 03/13] OMAP2420: hwmod data: Add McBSP
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 01/13] OMAP: hwmod: Add member 'name' to omap_hwmod_addr_space struct
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH v2 3/5] omap3: board-3430sdp: Initialise the serial pads.
  • From: sricharan <r.sricharan@xxxxxx>
• RE: [PATCH 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: Sricharan R <r.sricharan@xxxxxx>
• RE: [PATCH 1/5] omap2+: mux: Seperate the pads of a hwmod as static and dynamic.
  • From: Sricharan R <r.sricharan@xxxxxx>
• handling clock nodes with both parent and divider selection
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH V2] OMAP3: PM: Set/reset T2 bit for Smartreflex on TWL.
  • From: "Koyamangalath, Abhilash" <abhilash.kv@xxxxxx>
• [PATCH v2] OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM
  • From: Ricardo Salveti de Araujo <ricardo.salveti@xxxxxxxxxxxxx>
• [PATCH v2 2/2] OMAP: omap_device: API to modify AUTOIDLE and SMARTIDLE bits
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/2] OMAP: hwmod: API to handle autoidle mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/2] OMAP: omap_device: API to modify SYSCONFIG register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH] video: omap24xxcam: Fix compilation
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH v4 0/4] Introduce hardware spinlock framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v4 4/4] omap: add hwspinlock device
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v4 3/4] OMAP4: hwmod data: Add hwspinlock
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v4 2/4] drivers: hwspinlock: add OMAP implementation
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH v4 1/4] drivers: hwspinlock: add framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Change ARM core rate.
  • From: Andrushka <stanv@xxxxxxxxxxx>
• Re: [PATCH] arm: Fix possible memory leak
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• [PATCH 19/23] arm: Fix possible null pointer read access
  • From: Stefan Weil <weil@xxxxxxxxxxxxxxx>
• [PATCH] arm: Fix possible memory leak
  • From: Stefan Weil <weil@xxxxxxxxxxxxxxx>
• RE: [PATCH 10/13] OMAP3: Add voltage dependency table for VDD1.
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Regulator question regarding I2C devices
  • From: Peter Barada <peter.barada@xxxxxxxxx>
• Re: Regulator question regarding I2C devices
  • From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
• RE: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• ARM Architecture and GENERIC_CMOS_UPDATE
  • From: Grant Erickson <marathon96@xxxxxxxxx>
• Re: [PATCH 10/13] OMAP3: Add voltage dependency table for VDD1.
  • From: Kevin Hilman <khilman@xxxxxx>
• Regulator question regarding I2C devices
  • From: Peter Barada <peter.barada@xxxxxxxxxxx>
• Re: [PATCH] arm: mach-omap2: voltage: debugfs: fix memory leak
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH] nohz/sched: delay going tickless when CPU is loaded
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH 1/5] omap2+: mux: Seperate the pads of a hwmod as static and dynamic.
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] arm: mach-omap2: voltage: debugfs: fix memory leak
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [PATCH] arm: mach-omap2: mux: free allocated memory on error exit
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 1/4] omap1: remove duplicated #include
  • From: Huang Weiyi <weiyi.huang@xxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 0/6] omap4: prcm: Few dpll, clockdomain and powerdomain updates
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] OMAP: hwmod: Do not expect an entry in clkdev to add alias for opt_clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/6] omap4: powerdomain: Add supported INACTIVE power state
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 5/6] omap4: dpll: Add dpll api to control GATE_CTRL
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 6/6] omap4: dpll: Enable auto gate control for all MX postdividers
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 2/6] omap4: prcm: Fix the CPUx clockdomain offsets
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 3/6] omap4: powerdomain: Use intended PWRSTS_* flags instead of values
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 0/6] omap4: prcm: Few dpll, clockdomain and powerdomain updates
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH 4/6] omap4: dpll: Enable all DPLL autoidle at boot
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [PATCH v9 6/7] omap3: nand: ecc layout select from board file
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 5/7] omap3: nand: configurable fifo threshold to gain the throughput
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 4/7] omap3: nand: prefetch in irq mode support
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 7/7] omap3: nand: making ecc layout as compatible with romcode ecc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 2/7] omap3: nand: configurable transfer type per board
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 1/7] omap3630: nand: fix device size to work in polled mode
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• [PATCH v9 0/7] nand prefetch-irq support and ecc layout chanage
  • From: Sukumar Ghorai <s-ghorai@xxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH v3 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• RE: [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: "Ghorai, Sukumar" <s-ghorai@xxxxxx>
• Re: [PATCH 1/5] OMAP:board-omap3evm: Change TWL related gpio API's to gpio*_cansleep
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH v3 3/4] OMAP4: DMIC: initializes the DMIC driver
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH v3 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH 2/2] omap3: beaglexm: fix DVI initialization
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• [PATCH 0/5] omap2+: mux: Add support for static and dynamic pads.
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH 3/5] omap3: board-3430sdp: Initialise the serial pads.
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH 1/5] omap2+: mux: Seperate the pads of a hwmod as static and dynamic.
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH 5/5] omap2+: board-n8x0: Change the flags for the serial pads.
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH 4/5] omap4: board-omap4panda: Initialise the serial pads
  • From: sricharan <r.sricharan@xxxxxx>
• [PATCH 2/5] omap4: board-4430sdp: Initialise the serial pads
  • From: sricharan <r.sricharan@xxxxxx>
• Re: [PATCH v2 4/4] OMAP4: DSS2: clocks: Add ick as dummy clock
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH] OMAP3630: PM: don't warn the user with a trace in case of PM34XX_ERRATUM
  • From: Ricardo Salveti de Araujo <ricardo.salveti@xxxxxxxxxxxxx>
• [PATCH 2/2] omap3: beaglexm: fix DVI initialization
  • From: Ricardo Salveti de Araujo <ricardo.salveti@xxxxxxxxxxxxx>
• [PATCH 1/2] omap3: beagle: adding regulator supply for vdds_sdi.
  • From: Ricardo Salveti de Araujo <ricardo.salveti@xxxxxxxxxxxxx>
• [PATCH 0/2] beagle: making DVI output work again
  • From: Ricardo Salveti de Araujo <ricardo.salveti@xxxxxxxxxxxxx>
• Re: [PATCH 00/12]staging:tidspbridge - Remove hungarian notation from structures
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 1/2] arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] i2c: OMAP: fix static suspend vs. runtime suspend
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/5] OMAP3EVM: Board bug fixes/enhancements
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 0/5] OMAP3EVM: Board bug fixes/enhancements
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 5/5] OMAP3EVM: Set TSC wakeup option in pad config
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Open issues after 2.6.38 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] OMAP3EVM: Board bug fixes/enhancements
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 11/14] ARM: v6k: use CPU domain feature if we include support for arch < ARMv6K
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [PATCH] omap2+: Fix omap_serial_early_init to work with init_early hook
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 4/4] OMAP4: DSS2: clocks: Add ick as dummy clock
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [query] smartreflex: No PMIC hook to init smartreflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] ARM: Avoid discarding sections that might have SMP_ON_UP fixups SMP_ON_UP fixups
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/4] OMAP2PLUS: opt-clocks: align dss clock roles and names
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/2] arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH v10 18/18] OMAP2, 3: DSS2: Get DSS IRQ from platform device
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH v2] ARM: Avoid discarding sections that might have SMP_ON_UP fixups SMP_ON_UP fixups
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• RE: [query] smartreflex: No PMIC hook to init smartreflex
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [query] smartreflex: No PMIC hook to init smartreflex
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• RE: [PATCH v1 1/3]mmc: implemented runtime pm for mmc host
  • From: "Tardy, Pierre" <pierre.tardy@xxxxxxxxx>
• [RESEND][PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Nishant Kamat <nskamat@xxxxxx>
• Re: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v10 18/18] OMAP2, 3: DSS2: Get DSS IRQ from platform device
  • From: Raghuveer Murthy <x0075817@xxxxxx>
• Re: [PATCH v10 18/18] OMAP2, 3: DSS2: Get DSS IRQ from platform device
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Raghuveer Murthy <x0075817@xxxxxx>
• [PATCH v5 2/5] omap3: Remove unusued ISP CBUFF resource
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v5 0/5] OMAP3 ISP driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v5 3/5] omap3: Add function to register omap3isp platform device structure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v5 1/5] ARM: OMAP3: Update Camera ISP definitions for OMAP3630
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v5 4/5] omap2: Fix camera resources for multiomap
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Nishant Kamat <nskamat@xxxxxx>
• RE: [PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Nishant Kamat <nskamat@xxxxxx>
• [PATCH] omap2plus: smartreflex: add error checking for debugfs_create_*()
  • From: Anand S Sawant <sawant@xxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: "Dave P. Martin" <dave.martin@xxxxxxxxxx>
• [PATCH v3 3/3] OMAP4: DSS2: Add hwmod device names for OMAP4.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 2/3] OMAP4: hwmod data: add DSS DISPC DSI1,2 RFBI HDMI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v3 0/3] OMAP4: hwmod DSS support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCHv5] omap3: Add basic support for 720MHz part
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH V3] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• RE: [RFC/PATCH] OMAP3: run the ASM sleep code from DDR
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• [PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] omap: omap3evm: add support for the WL12xx WLAN module to the AM/DM3xx Evaluation Module
  • From: "Reizer, Eyal" <eyalr@xxxxxx>
• Re: [query] smartreflex: No PMIC hook to init smartreflex
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: [PATCH v2 1/4] OMAP2PLUS: opt-clocks: align dss clock roles and names
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: mux init with multiple signal paths.
  • From: Silesh C V <saileshcv@xxxxxxxxx>
• Re: [PATCH v2] musb: am35x: fix compile error due to control apis
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: mux init with multiple signal paths.
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [RFC 2/3] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU on 3430ES2PLUS
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• mux init with multiple signal paths.
  • From: Silesh C V <saileshcv@xxxxxxxxx>
• Re: [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: fix save secure RAM to restore MPU power state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v1 1/3]mmc: implemented runtime pm for mmc host
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: Moving to TI, email change
  • From: Magdalena Iovescu <iovescu.magdalena@xxxxxxxxx>
• Re: [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 0/3] oprofile: ARM backtraces and few minors
  • From: Robert Richter <robert.richter@xxxxxxx>
• Re: [PATCH v1 1/3]mmc: implemented runtime pm for mmc host
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Latest regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] OMAP4: hwmod: add entries for DMIC driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups
  • From: "Dave P. Martin" <dave.martin@xxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH] Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Sutharsan <sutharsan.tech@xxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] OMAP4: hwmod: add entries for DMIC driver
  • From: "Lambert, David" <dlambert@xxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• RE: [PATCH] perf: add OMAP support for the new power events
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] perf: add OMAP support for the new power events
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Moving to TI, email change
  • From: Tomi Valkeinen <tomba@xxxxxx>
• RE: [PATCH] OMAP3: PM: fix save secure RAM to restore MPU power state
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Latest regressions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• RE: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• RE: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Sutharsan <sutharsan.tech@xxxxxxxxx>
• Staging: Westbridge: fix EXPORT_SYMBOL errors reported by checkpatch.pl
  • From: Sutharsan <sutharsan.tech@xxxxxxxxx>
• [PATCH v2 3/3] OMAP4: DSS2: Add hwmod device names for OMAP4.
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 2/3] OMAP4: hwmod data: add DSS DISPC DSI1,2 RFBI HDMI VENC
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 0/3] OMAP4: hwmod DSS support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH v3 0/4] Adding OMAP DMIC driver to kernel
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• [PATCH] OMAP3: PM: fix save secure RAM to restore MPU power state
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v7] OMAP2+: PM: omap device: API's for handling mstandby mode
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH v3 2/4] OMAP4: hwmod: add entries for DMIC driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v3 4/4] OMAP4: DMIC: Add DMIC codec platform devices
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v3 1/4] ASoC: DMIC: Adding the OMAP DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v3 3/4] OMAP4: DMIC: initializes the DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v3 2/4] OMAP4: hwmod: add entries for DMIC driver
  • From: David Lambert <dlambert@xxxxxx>
• [PATCH v3 0/4] Adding OMAP DMIC driver to kernel
  • From: David Lambert <dlambert@xxxxxx>
• RE: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• RE: [PATCH v1 1/3]mmc: implemented runtime pm for mmc host
  • From: "Tardy, Pierre" <pierre.tardy@xxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH 1/5] ARM: gic: Add hooks for architecture specific extensions
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/14] ARM: bitops: ensure set/clear/change bitops take a word-aligned pointer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap: hwmod: Populate _mpu_rt_va later on in omap_hwmod_late_init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2] OMAP: fix fncpy API call
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] AM/DM37x: DSS mux configuration for >Rev-B processor cards
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 4/5] OMAP3EVM: Made backlight GPIO default state to off
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 5/5] OMAP3EVM: Set TSC wakeup option in pad config
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 2/5] OMAP3EVM: Add vio regulator supply required for ads7846 TSC driver
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 1/5] OMAP:board-omap3evm: Change TWL related gpio API's to gpio*_cansleep
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH 0/5] OMAP3EVM: Board bug fixes/enhancements
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP: fix fncpy API call
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH] OMAP: fix fncpy API call
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] OMAP: fix fncpy API call
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v10 00/18] OMAP2,3: hwmod DSS Adaptation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v8 3/7] omap: gpmc: enable irq mode in gpmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: v6k: remove CPU_32v6K dependencies in asm/spinlock.h
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFC 2/3] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU on 3430ES2PLUS
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: "Poddar, Sourav" <sourav.poddar@xxxxxx>
• Re: [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: Hari Kanigeri <hari.kanigeri@xxxxxxxxx>
• RE: [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [query] smartreflex: No PMIC hook to init smartreflex
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH-V2] OMAP3EVM:FIX: Reset the smsc911x ethernet controller in board_init
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• RE: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: bitops: switch set/clear/change bitops to use ldrex/strex
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 01/32] arm/omap: use system_wq in mailbox
  • From: Tejun Heo <tj@xxxxxxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] OMAP4: DSS2: clocks: Add ick as dummy clock
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 3/4] OMAP2PLUS: DSS2: Generalize external clock names in struct dss of dss.c
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 2/4] OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driver
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 1/4] OMAP2PLUS: opt-clocks: align dss clock roles and names
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v2 0/4] OMAP2PLUS: DSS: Generalize clock names
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH v2 5/5] OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 2/5] OMAP: clockdomain: Arch specific funcs to handle deps
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 3/5] OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 4/5] OMAP: clockdomain: Arch specific funcs for hwsup control of clkdm
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 1/5] OMAP: clockdomain: Infrastructure to put arch specific code
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/5] Clockdomain split series
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: scu: Move register defines to header file
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] OMAP: use fncpy to copy the PM code functions to SRAM
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] OMAP: McSPI: Hwmod adaptation + runtime conversion
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 3/5] ARM: twd: Add context save restore support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• RE: [RFC 2/3] OMAP3: PM: Fix CLK_SRC mask for IVA2 and MPU on 3430ES2PLUS
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 0/5] Clockdomain split series
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 0/5] Clockdomain split series
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [RFC 1/3] OMAP: clocks: Use clk names instead of clk pointers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 0/5] Clockdomain split series
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v2 0/5] Clockdomain split series
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP3EVM:FIX: Reset the SMSC911x Ethernet controller in board_init
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>