clean the regulator supply mapping data in the 3430sdp
board file (which is spread all over) by moving all
of them together.
Also use the REGULATOR_SUPPLY macro and remove instances
of mapping dev pointers at run time.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
---
arch/arm/mach-omap2/board-3430sdp.c | 54 +++++++++++++----------------------
1 files changed, 20 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index dcdc718..6afee65 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -315,11 +315,6 @@ static struct platform_device sdp3430_dss_device = {
},
};
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
- .supply = "vdda_dac",
- .dev = &sdp3430_dss_device.dev,
-};
-
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_dss_device,
};
@@ -370,18 +365,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
- .supply = "vmmc",
-};
-
static int sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -392,13 +375,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
mmc[1].gpio_cd = gpio + 1;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters ... we "know" the
- * regulators will be set up only *after* we return.
- */
- sdp3430_vmmc1_supply.dev = mmc[0].dev;
- sdp3430_vsim_supply.dev = mmc[0].dev;
- sdp3430_vmmc2_supply.dev = mmc[1].dev;
-
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request(gpio + 7, "sub_lcd_en_bkl");
gpio_direction_output(gpio + 7, 0);
@@ -427,10 +403,28 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1,
};
+/* regulator consumer mappings */
+
/* ads7846 on SPI */
static struct regulator_consumer_supply sdp3430_vaux3_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies =
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+
+static struct regulator_consumer_supply sdp3430_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply sdp3430_vsim_supply =
+ REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply sdp3430_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
/*
* Apply all the fixed voltages since most versions of U-Boot
* don't bother with that initialization.
@@ -550,14 +544,6 @@ static struct regulator_init_data sdp3430_vdac = {
.consumer_supplies = &sdp3430_vdda_dac_supply,
};
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
- {
- .supply = "vdds_dsi",
- .dev = &sdp3430_dss_device.dev,
- }
-};
-
static struct regulator_init_data sdp3430_vpll2 = {
.constraints = {
.name = "VDVI",
@@ -569,8 +555,8 @@ static struct regulator_init_data sdp3430_vpll2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
- .consumer_supplies = sdp3430_vpll2_supplies,
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &sdp3430_vpll2_supplies,
};
static struct twl4030_codec_audio_data sdp3430_audio = {
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
