Tony Lindgren wrote:
> Here's one more es1.0 fix after the recent USB changes.
>
> Regards,
>
> Tony
>
>
> Author: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Tue Jan 11 15:03:03 2011 -0800
>
> omap4: Fix ULPI PHY init for ES1.0 SDP
>
> Commit 6aa85a5ae610106d89e50c7e1f760c56d12f9bc4 (omap4: 4430sdp:
> enable the ehci port on 4430SDP) added code to enable EHCI
> support on 4430sdp board.
>
> Looks like the ULPI pin does not seem to be muxed properly on ES1.0
> SDP and this causes the system to reboot when the ULPI PHY is
> enabled.
>
> Fix this by muxing the pin, this is the same setting for
> both ES1.0 and ES2.0. Also add checking for gpio_request.
>
> Cc: Keshava Munegowda <keshava_mgowda@xxxxxx
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -554,6 +554,7 @@ static void __init omap_sfh7741prox_init(void)
>
> #ifdef CONFIG_OMAP_MUX
> static struct omap_board_mux board_mux[] __initdata = {
> + OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
> { .reg_offset = OMAP_MUX_TERMINATOR },
> };
> #else
Tony,
I believe this fix is fixing your reboot issue, but it's breaking
EHCI support on the SDP.
The MODE4 above should really be MODE3 - all GPIOs are on MODE3.
By changing
The patch snippet below fixes EHCI on the SDP, but I believe that
making this change will reintroduce the "board reboots" issue
you originally reported. Could you check and tell me if this
is the case?
Just curious - is your board a Blaze, or an SDP?
diff --git a/arch/arm/mach-omap2/board-4430sdp.c
b/arch/arm/mach-omap2/board-4430sdp.c
index 07d1b20..ab9fb4d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -554,7 +554,7 @@ static void __init omap_sfh7741prox_init(void)
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
- OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
