Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- Re: [PATCH v4 0/3] OMAP3: beaglexm: GPIO fixes, (continued)
- [RFC] omap3: Enable SmartReflex calculations for 720MHz,
Sanjeev Premi
- [PATCH v2 2/2] OMAP3: beagle xm: enable upto 800MHz OPP,
Nishanth Menon
- [PATCH] omap3: Add basic support for 720MHz part,
Sanjeev Premi
- [GIT PULL] OMAP DSS changes for .38 merge window,
Tomi Valkeinen
- Build breakage with omap2plus_defconfig,
Felipe Balbi
- Latest regressions,
Russell King - ARM Linux
- Latest config warning,
Russell King - ARM Linux
- [PATCH v5 00/17] OMAP2,3: hwmod DSS Adaptation,
Sumit Semwal
- [PATCH v5 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC,
Sumit Semwal
- [PATCH v5 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC,
Sumit Semwal
- [PATCH v5 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC,
Sumit Semwal
- [PATCH v5 04/17] OMAP2,3 DSS2 Change driver name to omap_display,
Sumit Semwal
- [PATCH v5 05/17] OMAP2,3 DSS2 Use Regulator init with driver name,
Sumit Semwal
- [PATCH v5 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.,
Sumit Semwal
- [PATCH v5 07/17] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init(),
Sumit Semwal
- [PATCH v5 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP,
Sumit Semwal
- [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v5 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver,
Sumit Semwal
- [PATCH v5 11/17] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v5 12/17] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v5 14/17] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v5 15/17] OMAP2,3: DSS2: replace printk with dev_dbg in init,
Sumit Semwal
- [PATCH v5 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr,
Sumit Semwal
- [PATCH v5 13/17] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v5 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device,
Sumit Semwal
- Re: [PATCH v5 00/17] OMAP2,3: hwmod DSS Adaptation,
Tomi Valkeinen
- [PATCH 3/9] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer,
Thomas Renninger
- [PATCH 8/9] perf timechart: Map power:cpu_idle events to the corresponding cpuidle state,
Thomas Renninger
- [PATCH 4/9] cpuidle: Introduce .abbr (abbrevation) for cpuidle states,
Thomas Renninger
- omap: Beagle: detect new xM revision B,
Koen Kooi
- [RFT/PATCH v2 00/12] Retu meets GENIRQ,
Felipe Balbi
- [RFT/PATCH v2 01/12] cbus: retu: get rid of retu-user.c,
Felipe Balbi
- [RFT/PATCH v2 02/12] cbus: retu: give it a context structure,
Felipe Balbi
- [RFT/PATCH v2 03/12] cbus: retu: move module_* close to the matching symbol,
Felipe Balbi
- [RFT/PATCH v2 04/12] cbus: retu: cleanup error path,
Felipe Balbi
- [RFT/PATCH v2 05/12] arm: omap: irqs: add CBUS_RETU_IRQ_BASE and CBUS_RETU_IRQ_END,
Felipe Balbi
- [RFT/PATCH v2 08/12] cbus: retu: headset: convert to threaded_irq,
Felipe Balbi
- [RFT/PATCH v2 06/12] arm: omap: cbus: pass irq_base and irq_end via platform_data,
Felipe Balbi
- [RFT/PATCH v2 10/12] cbus: retu-rtc: move to threaded irq,
Felipe Balbi
- [RFT/PATCH v2 07/12] cbus: retu: move to threaded IRQ and GENIRQ,
Felipe Balbi
- [RFT/PATCH v2 09/12] cbus: retu-pwrbutton: convert to threaded irq,
Felipe Balbi
- [RFT/PATCH v2 11/12] cbus: retu-rtc: drop the reset_occurred flag,
Felipe Balbi
- [RFT/PATCH v2 12/12] cbus: Makefile: re-enable retu-wdt,
Felipe Balbi
- [PATCH v4 00/17] OMAP2,3: hwmod DSS Adaptation,
Sumit Semwal
- [PATCH v4 01/17] OMAP2420: hwmod data: add DSS DISPC RFBI VENC,
Sumit Semwal
- [PATCH v4 02/17] OMAP2430: hwmod data: add DSS DISPC RFBI VENC,
Sumit Semwal
- [PATCH v4 03/17] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC,
Sumit Semwal
- [PATCH v4 04/17] OMAP2,3 DSS2 Change driver name to omap_display,
Sumit Semwal
- [PATCH v4 05/17] OMAP2,3 DSS2 Use Regulator init with driver name,
Sumit Semwal
- [PATCH v4 06/17] OMAP2,3: DSS2: Create new file display.c for central dss driver registration.,
Sumit Semwal
- [PATCH v4 07/17] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init(),
Sumit Semwal
- [PATCH v4 08/17] OMAP2,3: DSS2: Build omap_device for each DSS HWIP,
Sumit Semwal
- [PATCH v4 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v4 10/17] OMAP2,3: DSS2: Move clocks from core driver to dss driver,
Sumit Semwal
- [PATCH v4 11/17] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v4 12/17] OMAP2,3: DSS2: DISPC: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v4 13/17] OMAP2,3: DSS2: VENC: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v4 14/17] OMAP2,3: DSS2: DSI: create platform_driver, move init,exit to driver,
Sumit Semwal
- [PATCH v4 15/17] OMAP2,3: DSS2: replace printk with dev_dbg in init,
Sumit Semwal
- [PATCH v4 16/17] OMAP2,3: DSS2: Use platform device to get baseaddr,
Sumit Semwal
- [PATCH v4 17/17] OMAP2,3: DSS2: Get DSS IRQ from platform device,
Sumit Semwal
- [GIT PULL] omap changes for v2.6.38,
Tony Lindgren
- [PATCH v3 0/3] OMAP3: beaglexm: GPIO fixes,
Nishanth Menon
- Windows on OMAP,
Dirk Behme
- 4430SDP boot failure,
Russell King - ARM Linux
- More LDP stuff,
Russell King - ARM Linux
- RFBI worked example,
Ben Tucker
- [PATCH v2 0/4] Adding OMAP DMIC driver to kernel,
David Lambert
- LCD driver,
kalyan Alle
- OMAP3 and OMAP4 M-Shield Mobile Security Technology with linux-omap,
Aleksandar Lazic
- Errors when building for omap4 only,
Premi, Sanjeev
- Current OMAP build failures,
Russell King - ARM Linux
- [PATCH] OMAP4 PM: To correct voltages in MPU OPP Table,
shweta . gulati
- [PATCH v3] hwmon: twl4030: Driver for twl4030 madc module,
Keerthy
- [PATCH 0/2] Add optional mtd nand alignment for subpage reading,
Charles Manning
- [PATCH] PM: fix suspend_set_ops() to take const pointer,
Kevin Hilman
- [PATCHv2] staging: tidspbridge: configure full L1 MMU range,
Fernando Guzman Lugo
- [PATCH 0/2] OMAP3: Beagle: enable 800MHz for xm,
Nishanth Menon
- [PATCH 0/2] tools, perf: new power trace API,
jean . pihet
- [PATCH 1/1] arm: omap: gpio: define .disable callback for gpio irq chip,
Eduardo Valentin
- [PATCH 0/3] OMAP4: DSS OMAP4 hwmod support,
Sumit Semwal
- [PATCH 0/3] OMAP2PLUS: DSS: Generalize clock names,
Sumit Semwal
- [PATCH] arm: mach-omap2: mux: fix buffer overrun,
Aaro Koskinen
- [PATCH] OMAP: Cpufreq: Clean up to support multi omap builds,
Thara Gopinath
- OMAP DVFS rebase,
Gopinath, Thara
- [PATCH 0/5] Clockdomain split series,
Rajendra Nayak
- OMAP4 panda gets stuck during reboot,
Felipe Balbi
- [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register(v1),
tom . leiming
- [PATCH] omap: wd_timer: Fix crash frm wdt_probe when !CONFIG_RUNTIME_PM,
Santosh Shilimkar
- [PATCH v8 0/11] dmtimer adaptation to platform_driver,
Tarun Kanti DebBarma
- [PATCH v8 2/11] OMAP2420: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v8 4/11] OMAP3: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v8 3/11] OMAP2430: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v8 5/11] OMAP4: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v8 8/11] OMAP: dmtimer: platform driver,
Tarun Kanti DebBarma
- [PATCH v8 10/11] OMAP: dmtimer: pm_runtime support,
Tarun Kanti DebBarma
- [PATCH v8 9/11] OMAP: dmtimer: switch-over to platform device driver,
Tarun Kanti DebBarma
- [PATCH v8 11/11] OMAP: dmtimer: add timeout to low-level routines,
Tarun Kanti DebBarma
- [PATCH v8 1/11] OMAP2+: dmtimer: add device names to flck nodes,
Tarun Kanti DebBarma
- [PATCH v8 6/11] OMAP1: dmtimer: conversion to platform devices,
Tarun Kanti DebBarma
- [PATCH v8 7/11] OMAP2+: dmtimer: convert to platform devices,
Tarun Kanti DebBarma
- Re: [PATCH v8 0/11] dmtimer adaptation to platform_driver,
Kevin Hilman
- [PATCH v2 1/5] omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask,
Santosh Shilimkar
- [PATCH] staging: tidspbridge - configure full L1 MMU range,
Fernando Guzman Lugo
- [PATCH 0/5] OMAP2+: trivial sparse fixes,
Nishanth Menon
- [PATCH 0/5] omap2plus: Trivial build break fixes,
Santosh Shilimkar
- [PATCH] arm: omap4: panda: remove usb_nop_xceiv_register,
tom . leiming
- [PATCH v8 0/7] nand prefetch-irq support and ecc layout chanage,
Sukumar Ghorai
- [PATCH 0/4] ARM IRQ Changes,
Felipe Balbi
- [PATCH v2] OMAP2+: fix incorrect computation of autoidle_mask,
Tarun Kanti DebBarma
- [PATCH 0/2] IRQ-related changes,
Felipe Balbi
- I2C Touchscreen OMAP OOPS,
David Lynch Jr.
- [PATCH] OMAP3+: sr_device: include pm header,
Nishanth Menon
- [PATCH 0/2] OMAP: TWL: sparse fixes,
Nishanth Menon
- [PATCH v3 4/4] TI816X: Add low level debug support,
Hemant Pedanekar
- [PATCH v3 1/4] TI816X: Update common omap platform files,
Hemant Pedanekar
- [PATCH v3 3/4] TI816X: Create board support and enable build for TI816X EVM,
Hemant Pedanekar
- [PATCH v3 2/4] TI816X: Update common OMAP machine specific sources,
Hemant Pedanekar
- [PATCH v3 0/4] Introduce support for TI816X processor series,
Hemant Pedanekar
- Re: [PATCH v5 1/3] ARM: add CPPI 4.1 DMA support,
Russell King - ARM Linux
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
