> -----Original Message----- > From: Russell King - ARM Linux [mailto:linux@xxxxxxxxxxxxxxxx] > Sent: Friday, January 07, 2011 9:54 PM > To: Santosh Shilimkar > Cc: linux-omap@xxxxxxxxxxxxxxx; Tony Lindgren > Subject: Re: 4430SDP boot failure > > On Fri, Jan 07, 2011 at 07:56:34PM +0530, Santosh Shilimkar wrote: > > > -----Original Message----- > > > From: Russell King - ARM Linux [mailto:linux@xxxxxxxxxxxxxxxx] > > > Sent: Friday, January 07, 2011 7:55 PM > > > To: Santosh Shilimkar > > > Cc: linux-omap@xxxxxxxxxxxxxxx; Tony Lindgren > > > Subject: Re: 4430SDP boot failure > > > > > > On Fri, Jan 07, 2011 at 06:39:06PM +0530, Santosh Shilimkar > wrote: > > > > Have sent you latest bootloaders and full bootlog on my ES1.0 > > > > OMAP4430SDP. 2.6.37 just boots fine for me. > > > > > > > > Low level debug as you reported seems to be broken though. > > > > > > Many thanks, the new mlo and uboot gets dhcp/tftp working nicely > on > > > the board - which should ease the debugging problem as it no > longer > > > requires anything but the reset button pressed to test a new > kernel. > > > > Glad to hear that. > > Right, next couple of problems. > > udev isn't creating the ttyO* nodes for whatever reason on my fs - > does > anyone know what device major/minor numbers these end up with? It > seems > they're dynamically assigned. > Right now don't have access to my board so can't check this. > There's also something fishy going on with networking (if I > configure > PNP IP, I get an IP: > > ks8851 spi1.0: message enable is 0 > ks8851 spi1.0: eth0: revision 0, MAC 1a:6a:b1:02:1d:90, IRQ 194 > IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.0.144 > IP-Config: Complete: > device=eth0, addr=192.168.0.144, mask=255.255.255.0, > gw=192.168.0.1, > host=192.168.0.144, domain=arm.linux.org.uk, nis-domain=(none), > bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= > > but the board doesn't respond to that IP address. Meanwhile the > DHCP > server shows: > > DHCPDISCOVER from 1a:6a:b1:02:1d:90 via eth0 > > in its log, and the ethernet address appears to be random for each > boot. > Obviously, as I can't log into the board via any means, it's nigh on > impossible to work out what's actually going on. DHCP seems to work for me without any issues. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
