Add vio regulator supply, needed for ads7846 touchscreen controller driver. Tested on OMAP3 (ES3.1 Si) RevG version of EVM. Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> --- Changes from V1 - - Added patch description. arch/arm/mach-omap2/board-omap3evm.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index a158d21..ed0311c 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -538,6 +538,25 @@ static struct regulator_init_data omap3_evm_vpll2 = { .consumer_supplies = &omap3_evm_vpll2_supply, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply omap3evm_vio_supply = + REGULATOR_SUPPLY("vcc", "spi1.0"); + +/* VIO for ads7846 */ +static struct regulator_init_data omap3evm_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3evm_vio_supply, +}; + static struct twl4030_platform_data omap3evm_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -550,6 +569,7 @@ static struct twl4030_platform_data omap3evm_twldata = { .codec = &omap3evm_codec_data, .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, + .vio = &omap3evm_vio, }; static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { -- 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html