> -----Original Message----- > From: Varadarajan, Charulatha [mailto:charu@xxxxxx] > Sent: Monday, January 24, 2011 8:13 PM > To: Hiremath, Vaibhav > Cc: linux-omap@xxxxxxxxxxxxxxx; tony@xxxxxxxxxxx > Subject: Re: [PATCH] OMAP3EVM: Add vio regulator supply required for > ads7846 TSC driver > > On Mon, Jan 24, 2011 at 20:02, <hvaibhav@xxxxxx> wrote: > > From: Vaibhav Hiremath <hvaibhav@xxxxxx> > > > > Please add a patch description. > [Hiremath, Vaibhav] I can copy/paste subject line again here, but I thought subject description is sufficient to explain purpose of patch so did not mentioned anything here. Thanks, Vaibhav > > > > Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> > > --- > > arch/arm/mach-omap2/board-omap3evm.c | 20 ++++++++++++++++++++ > > 1 files changed, 20 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach- > omap2/board-omap3evm.c > > index a158d21..ed0311c 100644 > > --- a/arch/arm/mach-omap2/board-omap3evm.c > > +++ b/arch/arm/mach-omap2/board-omap3evm.c > > @@ -538,6 +538,25 @@ static struct regulator_init_data omap3_evm_vpll2 = > { > > .consumer_supplies = &omap3_evm_vpll2_supply, > > }; > > > > +/* ads7846 on SPI */ > > +static struct regulator_consumer_supply omap3evm_vio_supply = > > + REGULATOR_SUPPLY("vcc", "spi1.0"); > > + > > +/* VIO for ads7846 */ > > +static struct regulator_init_data omap3evm_vio = { > > + .constraints = { > > + .min_uV = 1800000, > > + .max_uV = 1800000, > > + .apply_uV = true, > > + .valid_modes_mask = REGULATOR_MODE_NORMAL > > + | REGULATOR_MODE_STANDBY, > > + .valid_ops_mask = REGULATOR_CHANGE_MODE > > + | REGULATOR_CHANGE_STATUS, > > + }, > > + .num_consumer_supplies = 1, > > + .consumer_supplies = &omap3evm_vio_supply, > > +}; > > + > > static struct twl4030_platform_data omap3evm_twldata = { > > .irq_base = TWL4030_IRQ_BASE, > > .irq_end = TWL4030_IRQ_END, > > @@ -550,6 +569,7 @@ static struct twl4030_platform_data omap3evm_twldata > = { > > .codec = &omap3evm_codec_data, > > .vdac = &omap3_evm_vdac, > > .vpll2 = &omap3_evm_vpll2, > > + .vio = &omap3evm_vio, > > }; > > > > static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { > > -- > > 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
