* Kevin Hilman <khilman@xxxxxx> [110119 13:37]: > Kevin Hilman <khilman@xxxxxx> writes: > > > jean.pihet@xxxxxxxxxxxxxx writes: > > > >> From: Jean Pihet <j-pihet@xxxxxx> > >> > >> The new fncpy API is better suited for copying some > >> code to SRAM at runtime. This patch changes the ad-hoc > >> code to the more generic fncpy API. > >> > >> Tested OK on OMAP3 in low power modes (RET/OFF) > >> using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL. > >> Compile tested on OMAP1/2 using omap1_defconfig. > >> > >> Signed-off-by: Jean Pihet <j-pihet@xxxxxx> > > > > Acked-by: Kevin Hilman <khilman@xxxxxx> > > > > Boot tested on OMAP1 & OMAP2 as well. Note that neither OMAP1 or OMAP2 > > has had working suspend/resume for a long time now, so I did not test > > suspend/resume. > > For OMAP2: > > Tested-by: Kevin Hilman <khilman@xxxxxx> > > to test a little more on OMAP2, I just removed the WFI from the > low-level code and tested suspend that way. That's enough to be sure > the copied code is copied and executed. > > Worked fine on OMAP2420/n810. > > For OMAP1, this didn't work and would require more serious hacking on > the OMAP1 suspend path, which I currently have no plans to do. Boots fine on osk5912 and n800 too: Tested-by: Tony Lindgren <tony@xxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html