[HELP-OMAP-SERAIL] beagleboard-xM can't boot up after update to kernel-2.6.37

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, folks

After I update kernel from 2.6.36.2 to 2.6.37, my beagleboard-xM can't bootup.
The message is:
===============================================
Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)
Beagle xM Rev A
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2010.12-svn2585 (ADI-2011R1-pre) (Jan 17 2011 - 11:09:50)

OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #15dc00211ff00000015739eb08018030
Hit any key to stop autoboot:  0
OMAP3 beagleboard.org # run bootcmd
reading boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage

1903484 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-2.6.37-ADI-2011R1-pre-g02d
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1903420 Bytes = 1.8 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
=================================

Then nothing appears.
I think the reason is 2.6.37 using omap-serial driver.
After I force it using 8250 serial driver, it works fine.

Any ideas?
Thanks !

Attach my linux .config file.
-- 
Regards,
--Bob

Attachment: omap3.config
Description: Binary data


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux